TM3DM24RG_V01 SCHNEIDER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Discrete I/O module, Modicon TM3,

24 IO (16 inputs, 8 relay outputs,

spring) 24 VDC TM3DM24RG Main Range of product Modicon TM3 Product or component type Discrete I/O module Range compatibility Modicon M241 Modicon M251 Modicon M221 Modicon M262 Discrete input number 16 for input conforming to IEC 61131-2 Type 1 Discrete input logic Sink or source (positive/negative) Discrete input voltage 24 V Discrete input current 7 mA for input Discrete output type Relay normally open Discrete output number 8 Discrete output logic Positive or negative Discrete output voltage 24 V DC for relay output

240 V AC for relay output

Discrete output current 2000 mA for relay output Complementary Discrete I/O number 24 Current consumption 5 mA at 5 V DC via bus connector (at state off) 0 mA at 24 V DC via bus connector (at state on) 0 mA at 24 V DC via bus connector (at state off) 65 mA at 5 V DC via bus connector (at state on) Discrete input voltage type DC Voltage state 1 guaranteed 15...28.8 V for input Current state 1 guaranteed >= 2.5 mA (input) Voltage state 0 guaranteed 0...5 V for input Current state 0 guaranteed <= 1 mA (input) Input impedance 3.4 kOhm Response time 4 ms (turn-on) 4 ms (turn-off) Maximum current per output common 7 A Mechanical durability 20000000 cycles Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Apr 4, 2022

Minimum load 10 mA at 5 V DC for relay output Local signalling 1 LED per channel (green) for I/O state Electrical connection 17 x 1.5 mm² removable spring terminal block with pitch 3.81 mm adjustment for inputs 11 x 1.5 mm² removable spring terminal block with pitch 3.81 mm adjustment for outputs Maximum cable distance between devices Unshielded cable: <30 m for regular input Insulation Between input and internal logic at 500 V AC Non-insulated between inputs Between input groups and output groups at 1500 V AC Between open contact at 750 V AC Between output and internal logic at 500 V AC Non-insulated between outputs Marking CE Mounting support Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 plate or panel with fixing kit Height 90 mm Depth 84.6 mm Width 42.9 mm Environment Standards EN/IEC 61131-2 EN/IEC 61010-2-201 Product certifications C-Tick cULus Resistance to electrostatic discharge 8 kV in air conforming to EN/IEC 61000-4-2 4 kV on contact conforming to EN/IEC 61000-4-2 Resistance to electromagnetic fields 10 V/m 80 MHz...1 GHz conforming to EN/IEC 61000-4-3 3 V/m 1.4 GHz...2 GHz conforming to EN/IEC 61000-4-3 1 V/m 2 GHz...3 GHz conforming to EN/IEC 61000-4-3 Resistance to magnetic fields 30 A/m 50/60 Hz conforming to EN/IEC 61000-4-8 Resistance to fast transients 1 kV for I/O conforming to EN/IEC 61000-4-4 2 kV for relay output conforming to EN/IEC 61000-4-4 Surge withstand 2 kV output common mode conforming to EN/IEC 61000-4-5 1 kV input common mode conforming to EN/IEC 61000-4-5 Resistance to conducted disturbances 10 V 0.15...80 MHz conforming to EN/IEC 61000-4-6 (LR, ABS, DNV, GL) Electromagnetic emission Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to EN/IEC 55011 Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 230…1000 MHz conforming to EN/ IEC 55011 Ambient air temperature for operation -10…35 °C vertical installation -10…55 °C horizontal installation Ambient air temperature for storage -25…70 °C Relative humidity 10…95 %, without condensation (in operation) 10…95 %, without condensation (in storage) IP degree of protection IP20 with protective cover in place Pollution degree 2 Operating altitude 0...2000 m Storage altitude 0…3000 m Vibration resistance 3.5 mm at 5…8.4 Hz on DIN rail 3 gn at 8.4…150 Hz on DIN rail 3.5 mm at 5…8.4 Hz on panel 3 gn at 8.4…150 Hz on panel Shock resistance 15 gn for 11 ms Apr 4, 2022

Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 270.0 g Package 1 Height 7.5 cm Package 1 width 12.5 cm Package 1 Length 10.5 cm Unit Type of Package 2 S02 Number of Units in Package 2 9 Package 2 Weight 2.787 kg Package 2 Height 15 cm Package 2 width 30 cm Package 2 Length 40 cm Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins PVC free Yes California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Apr 4, 2022

(*) 8.5 mm/0.33 in. when the clamp is pulled out. Apr 4, 2022

Apr 4, 2022

Apr 4, 2022

Mounting on a Panel Surface (1) Install a mounting strip Mounting Hole Layout Apr 4, 2022

Digital Mixed I/O Module (24-channel) Wiring Diagram (Source) (*) Type T fuse (1) The COM0, COM1 and COM2 terminals are not connected internally. (2) To improve the life time of the contacts, and to protect from potential inductive load damage, it is recommended to connect a free wheeling diode in parallel to each inductive DC load or an RC snubber in parallel of each inductive AC load. (A) Sink wiring (positive logic) (C) Source wiring (positive logic) Wiring Diagram (Sink) (*) Type T fuse (1) The COM0, COM1 and COM2 terminals are not connected internally. (2) To improve the life time of the contacts, and to protect from potential inductive load damage, it is recommended to connect a free wheeling diode in parallel to each inductive DC load or an RC snubber in parallel of each inductive AC load. (B) Source wiring (negative logic) (D) Sink wiring (negative logic) Apr 4, 2022