TM2CN64EFH TI1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998 1POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 /C0068Organization: − TM2CN64EFH . . . 2 097 152 x 64 Bits − TM4CN64EFH . . . 4 194 304 x 64 Bits /C0068Single 3.3-V Power Supply (±10% Tolerance) /C0068Designed for 66-MHz 4-Clock Systems /C0068JEDEC 168-Pin Dual-In-Line Memory Module (DIMM) Without Buffer for Use With Socket /C0068TM2CN64EFH — Uses Eight 16M-Bit (2M × 8-Bit) Synchronous Dynamic RAMs (SDRAMs) in Plastic Thin Small-Outline Packages (TSOPs) /C0068TM4CN64EFH — Uses Sixteen 16M-Bit (2M × 8-Bit) SDRAMs in Plastic TSOPs /C0068Byte-Read/Write Capability /C0068Performance Ranges: /C0068High-Speed, Low-Noise, Low-Voltage TTL (LVTTL) Interface /C0068Read Latencies 2 and 3 Supported /C0068Support Burst-Interleave and Burst-Interrupt Operations /C0068Burst Length Programmable to 1, 2, 4, and 8 /C0068Two Banks for On-Chip Interleaving (Gapless Access) /C0068Ambient Temperature Range 0°C to 70°C /C0068Electroless Gold-Finished Contacts /C0068Pipeline Architecture /C0068Serial Presence Detect (SPD) Using EEPROM SYNCHRONOUS CLOCK CYCLE TIME ACCESS TIME CLOCK TO OUTPUT REFRESH INTERVAL tCK3 (CL = 3)† tCK2 (CL = 2) tAC3 (CL = 3) tAC2 (CL = 2) ’xCN64EFH-10 10 ns 15 ns 7.5 ns 7.5 ns 64 ms † CL = CAS latency
description
The TM2CN64EFH is a 16M-byte, 168-pin dual-in-line memory module (DIMM). The DIMM is composed of eight TMS626812BDGE 2 097152 x 8-bit SDRAMs, each in a 400-mil, 44-pin plastic thin small-outline package (TSOP) mounted on a substrate with decoupling capacitors. See the TMS626812B data sheet (literature number SMOS693). The TM4CN64EFH is a 32M-byte, 168-pin DIMM. The DIMM is composed of sixteen TMS626812BDGE 2097152 x 8-bit SDRAMs, each in a 400-mil, 44-pin plastic TSOP mounted on a substrate with decoupling capacitors. operation The TM2CN64EFH operates as eight TMS626812BDGE devices that are connected as shown in the TM2CN64EFH functional block diagram. The TM4CN64EFH operates as sixteen TMS626812BDGE devices connected as shown in the TM4CN64EFH functional block diagram. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCT PREVIEW Copyright 1998, Texas Instruments Incorporated/C0080/C0082/C0079/C0068/C0085/C0067/C0084 /C0080/C0082/C0069/C0086/C0073/C0069/C0087 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0099/C0111/C0110/C0099/C0101/C0114/C0110/C0115 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0105/C0110 /C0116/C0104/C0101 /C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0118/C0101 /C0111/C0114 /C0100/C0101/C0115/C0105/C0103/C0110 /C0112/C0104/C0097/C0115/C0101 /C0111/C0102 /C0100/C0101/C0118/C0101/C0108/C0111/C0112/C0109/C0101/C0110/C0116/C0046 /C0067/C0104/C0097/C0114/C0097/C0099/C0116/C0101/C0114/C0105/C0115/C0116/C0105/C0099 /C0100/C0097/C0116/C0097 /C0097/C0110/C0100 /C0111/C0116/C0104/C0101/C0114 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0097/C0114/C0101 /C0100/C0101/C0115/C0105/C0103/C0110 /C0103/C0111/C0097/C0108/C0115/C0046 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0114/C0101/C0115/C0101/C0114/C0118/C0101/C0115 /C0116/C0104/C0101 /C0114/C0105/C0103/C0104/C0116 /C0116/C0111 /C0099/C0104/C0097/C0110/C0103/C0101 /C0111/C0114 /C0100/C0105/C0115/C0099/C0111/C0110/C0116/C0105/C0110/C0117/C0101 /C0116/C0104/C0101/C0115/C0101 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0119/C0105/C0116/C0104/C0111/C0117/C0116 /C0110/C0111/C0116/C0105/C0099/C0101/C0046
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998
2 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
DUAL-IN-LINE MEMORY MODULE (TOP VIEW) TM4CN64EFH (SIDE VIEW) PIN NOMENCLATURE A[0:10] Row-Address Inputs A[0:8] Column-Address Inputs A11/BA0 Bank-Select Zero CAS Column-Address Strobe CKE[0:1] Clock Enable CK[0:3] System Clock DQ[0:63] Data-In/Data-Out DQMB[0:7] Data-In/Data-Out Mask Enable NC No Connect RAS Row-Address Strobe S[0:3] Chip Select SA[0:2] Serial Presence Detect (SPD) Device Address Input SCL SPD Clock SDA SPD Address/Data VDD 3.3-V Supply VSS Ground WE Write Enable WP Write Protect TM2CN64EFH (SIDE VIEW) PRODUCT PREVIEW
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998 3POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 Pin Assignments PIN PIN PIN PIN NO. NAME NO. NAME NO. NAME NO. NAME
1 VSS 43 VSS 85 VSS 127 VSS
2 DQ0 44 NC 86 DQ32 128 CKE0
3 DQ1 45 S2 87 DQ33 129 S3
4 DQ2 46 DQMB2 88 DQ34 130 DQMB6
5 DQ3 47 DQMB3 89 DQ35 131 DQMB7
6 VDD 48 NC 90 VDD 132 NC
7 DQ4 49 VDD 91 DQ36 133 VDD
8 DQ5 50 NC 92 DQ37 134 NC
9 DQ6 51 NC 93 DQ38 135 NC
10 DQ7 52 NC 94 DQ39 136 NC
11 DQ8 53 NC 95 DQ40 137 NC
12 VSS 54 VSS 96 VSS 138 VSS
13 DQ9 55 DQ16 97 DQ41 139 DQ48
14 DQ10 56 DQ17 98 DQ42 140 DQ49
15 DQ11 57 DQ18 99 DQ43 141 DQ50
16 DQ12 58 DQ19 100 DQ44 142 DQ51
17 DQ13 59 VDD 101 DQ45 143 VDD
18 VDD 60 DQ20 102 VDD 144 DQ52
19 DQ14 61 NC 103 DQ46 145 NC
20 DQ15 62 NC 104 DQ47 146 NC
21 NC 63 CKE1 105 NC 147 NC
22 NC 64 VSS 106 NC 148 VSS
23 VSS 65 DQ21 107 VSS 149 DQ53
24 NC 66 DQ22 108 NC 150 DQ54
25 NC 67 DQ23 109 NC 151 DQ55
26 VDD 68 VSS 110 VDD 152 VSS
27 WE 69 DQ24 111 CAS 153 DQ56
28 DQMB0 70 DQ25 112 DQMB4 154 DQ57
29 DQMB1 71 DQ26 113 DQMB5 155 DQ58
30 S0 72 DQ27 114 S1 156 DQ59
31 NC 73 VDD 115 RAS 157 VDD
32 VSS 74 DQ28 116 VSS 158 DQ60
33 A0 75 DQ29 117 A1 159 DQ61
34 A2 76 DQ30 118 A3 160 DQ62
35 A4 77 DQ31 119 A5 161 DQ63
36 A6 78 VSS 120 A7 162 VSS
37 A8 79 CK2 121 A9 163 CK3
38 A10 80 NC 122 A11/BA0 164 NC
39 NC 81 WP 123 NC 165 SA0
40 VDD 82 SDA 124 VDD 166 SA1
41 VDD 83 SCL 125 CK1 167 SA2
42 CK0 84 VDD 126 NC 168 VDD
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998
4 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
dual-in-line memory module and components The dual-in-line memory module and components include: /C0068PC substrate: 1,27 ± 0,1 mm (0.05 inch) nominal thickness; 0.005 inch/inch maximum warpage /C0068Bypass capacitors: Multilayer ceramic /C0068Contact area: Nickel plate and electroless gold-finished contacts over copper functional block diagram for the TM2CN64EFH
8 DQ[0:7]8
DQ[0:7] DQMB4 DQ[32:39] DQM DQ[0:7] DQM RAS RAS : SDRAM U[0:7] CK0 CK: U1, U5 CK2 C DQ[8:15] DQMB5 DQ[40:47] DQM DQ[0:7] DQM R = 10 Ω R C = 10 Ω C = 10 pF DQ[16:23] DQMB6 DQ[48:55] DQM DQ[0:7] DQM DQ[24:31] DQMB7 DQ[56:63] DQM DQ[0:7] DQM CAS CAS : SDRAM U[0:7] WE WE : SDRAM U[0:7] CKE0 CKE: SDRAM U[0:7] A[0:11] A[0:11]: SDRAM U[0:7] R C R C R C VDD VSS Bypass capacitance: One 0.1 µF and one 0.01 µF U[0:7] U[0:7] CK1 CK: U2, U6 CK: U3, U7 CK3 C R C R C R C CK: U0, U4 LEGEND: CS = Chip Select SPD = Serial Presence Detect SPD EEPROM SA0 SA1 SA2 A0 A1 A2 SCL SDA WP 47 kΩ PRODUCT PREVIEW
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998 5POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 functional block diagram for the TM4CN64EFH CS CS R DQMB0 DQMB4 DQ[32:39] DQM DQM RAS RAS : U[0:7], UB[0:7] CK0 CK: U0, U4 CK: U1, U5 DQ[8:15] DQMB5 DQ[40:47] DQM DQ[0:7] DQM R = 10 Ω R C = 10 Ω DQ[16:23] DQMB6 DQ[48:55] DQM DQ[0:7] DQM DQ[24:31] DQMB7 DQ[56:63] DQM DQ[0:7] DQM CAS CAS : U[0:7], UB[0:7] CKE0 CKE: U[0:7] WE WE: U[0:7], UB[0:7] R C R C VDD VSS U[0:7], UB[0:7] U[0:7], UB[0:7] CK1 CK: UB0, UB4 CK: UB1, UB5 R C R C DQ[0:7] CS UB0 DQM CS UB1 DQM DQ[0:7] DQ[0:7] CS UB2 DQM CS UB3 DQM DQ[0:7] DQ[0:7] CS UB4 DQM CS UB5 DQM DQ[0:7] DQ[0:7] CS UB6 DQM CS UB7 DQM DQ[0:7] CKE1 CKE: UB[0:7] 10 kΩ VDD CK2 CK: U2, U6 CK: U3, U7 R C R C CK3 CK: UB2, UB6 CK: UB3, UB7 R C R C SPD EEPROM SA0 SA1 SA2 A0 A1 A2 SCL SDA WP 47 kΩ Bypass capacitance: One 0.1 µF and one 0.01 µF PRODUCT PREVIEW
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998
6 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
absolute maximum ratings over operating ambient temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltage values are with respect to VSS . recommended operating conditions MIN NOM MAX UNIT VDD Supply voltage 3 3.3 3.6 V VSS Supply voltage 0 V VIH High-level input voltage 2 VDD + 0.3 V VIH-SPD High-level input voltage for the SPD device 2 5.5 V VIL Low-level input voltage‡ −0.3 0.8 V TA Operating ambient temperature 0 70 °C ‡ VIL MIN = −1.5 V ac (pulse width /C0118 5 ns) capacitance over recommended ranges of supply voltage and ambient temperature, f = 1 MHz (see Note 2)§ PARAMETER TMxCN64EFH UNITPARAMETER MIN MAX UNIT C i(CK) Input capacitance, CK input 2.5 4 pF C i(AC) Input capacitance, address and control inputs: A0−A11, RAS, CAS, WE 2.5 5 pF C i(CKE) Input capacitance, CKE input 5 pF C o Output capacitance 4 6.5 pF C i(DQMBx) Input capacitance, DQMBx input 2.5 5 pF C i(Sx) Input capacitance, Sx input 2.5 5 pF C i/o(SDA) Input/output capacitance, SDA input 9 pF C i(SPD) Input capacitance, SA0, SA1, SA2, SCL inputs 7 pF § Specifications in this table represent a single SDRAM device. NOTE 2: V DD = 3.3 V ± 0.3 V. Bias on pins under test is 0 V. PRODUCT PREVIEW
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998 7POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 electrical characteristics over recommended ranges of supply voltage and ambient temperature (unless otherwise noted) (see Note 3)† PARAMETER TEST CONDITIONS ’xCN64EFH-10 UNITPARAMETER TEST CONDITIONS MIN MAX UNIT VOH High-level output voltage IOH = − 2 mA 2.4 V VOL Low-level output voltage IOL = 2 mA 0.4 V II Input current (leakage) 0 V < VI < VDD + 0.3 V, All other pins = 0 V to VDD /C003410 µA IO Output current (leakage) 0 V < VO < VDD , Output disabled /C003410 µA ICC1 Operating current Burst length = 1, tRC ≥ tRC MIN IOH /IOL = 0 mA, one bank activated CAS latency = 2 85 mAICC1 Operating current RC RC IOH /IOL = 0 mA, one bank activated (see Note 4) CAS latency = 3 90 mA ICC2P Precharge standby current in CKE ≤ VIL MAX, tCK = 15 ns (see Note 5) 1 mAICC2PS Precharge standby current in power-down mode CKE and CK ≤ VIL MAX, tCK = ∞ (see Note 6) 1 mA ICC2N Precharge standby current in CKE ≥ VIH MIN, tCK = 15 ns (see Note 5) 30 mAICC2NS Precharge standby current in non-power-down mode CKE ≥ VIH MIN, CK ≤ VIL MAX, tCK = ∞ (see Note 6) 2 mA ICC3P Active standby current in CKE ≤ VIL MAX, tCK = 15 ns (see Note 5) 3 mAICC3PS Active standby current in power-down mode CKE and CK ≤ VIL MAX, tCK = ∞ (see Note 6) 3 mA ICC3N Active standby current in CKE ≥ VIH MIN, tCK = 15 ns (see Note 5) 40 mAICC3NS Active standby current in non-power-down mode CKE ≥ VIH MIN, CK ≤ VIL MAX, tCK = ∞ (see Note 6) 10 mA ICC4 Burst current Page burst, IOH /IOL = 0 mA All banks activated, nCCD = one cycle CAS latency = 2 130 mAICC4 Burst current OH OL All banks activated, nCCD = one cycle (see Note 7) CAS latency = 3 140 mA ICC5 Auto-refresh current tRC ≤ tRC MIN CAS latency = 2 80 mAICC5 Auto-refresh current t RC ≤ tRC MIN CAS latency = 3 85 mA ICC6 Self-refresh current CKE ≤ VIL MAX 0.4 mA † Specifications in this table represent a single SDRAM device. NOTES: 3. All specifications apply to the device after power-up initialization. All control and address inputs must be stable and valid. 4. Control, DQ, and address inputs change state twice during tRC . 5. Control, DQ, and address inputs change state once every 30 ns. 6. Control, DQ, and address inputs do not change. 7. Control, DQ, and address inputs change state once every cycle. PRODUCT PREVIEW
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998
8 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
ac timing requirements† ’xCN64EFH-10 UNIT MIN MAX UNIT tCK2 Cycle time, CLK, CAS latency = 2 15 ns tCK3 Cycle time, CLK, CAS latency = 3 10 ns tCH Pulse duration, CLK high 3 ns tCL Pulse duration, CLK low 3 ns tAC2 Access time, CLK high to data out, CAS latency = 2 (see Note 8) 7.5 ns tAC3 Access time, CLK high to data out, CAS latency = 3 (see Note 8) 7.5 ns tOH Hold time, CLK high to data out 3 ns tLZ Delay time, CLK high to DQ in low-impedance state (see Note 9) 2 ns tHZ Delay time, CLK high to DQ in high-impedance state (see Note 10) 8 ns tIS Setup time, address, control, and data input 2 ns tIH Hold time, address, control, and data input 1 ns tCESP Power-down/self-refresh exit time 10 ns tRAS Delay time, ACTV command to DEAC or DCAB command 50 100000 ns tRC Delay time, ACTV, REFR, or SLFR exit to ACTV, MRS, REFR, or SLFR command 80 ns tRCD Delay time, ACTV command to READ, READ-P, WRT, or WRT-P command (see Note 11) 20 ns tRP Delay time, DEAC or DCAB command to ACTV, MRS, REFR, or SLFR command 30 ns tRRD Delay time, ACTV command in one bank to ACTV command in the other bank 30 ns tRSA Delay time, MRS command to ACTV, MRS, REFR, or SLFR command 20 ns tAPR Final data out of READ-P operation to ACTV, MRS, SLFR, or REFR command tRP − (CL −1) * tCK ns tAPW Final data in of WRT-P operation to ACTV, MRS, SLFR, or REFR command tRP + tCK ns tT Transition time (see Note 12) 1 5 ns tREF Refresh interval 64 ms nCCD Delay time, READ or WRT command to an interrupting command 1 cycle nCDD Delay time, CS low or high to input enabled or inhibited 0 0 cycle nCLE Delay time, CKE high or low to CLK enabled or disabled 1 1 cycle nCWL Delay time, final data in of WRT operation to READ, READ-P, WRT, WRT-P 1 cycle nDID Delay time, ENBL or MASK command to enabled or masked data in 0 0 cycle nDOD Delay time, ENBL or MASK command to enabled or masked data out 2 2 cycle nHZP2 Delay time, DEAC or DCAB command to DQ in high-impedance state, CAS latency = 2 2 cycle nHZP3 Delay time, DEAC or DCAB command to DQ in high-impedance state, CAS latency = 3 3 cycle nWCD Delay time, WRT command to first data in 0 0 cycle nWR Delay time, final data in of WRT operation to DEAC or DCAB command 1 cycle † All references are made to the rising transition of CK unless otherwise noted. NOTES: 8. t AC is referenced from the rising transition of CK that precedes the data-out cycle. For example, the first data-out tAC is referenced from the rising transition of CK that is CAS latency − one cycle after the READ command. Access time is measured at output reference level 1.4 V. 9. tLZ is measured from the rising transition of CK that is CAS latency − one cycle after the READ command. 10. tHZ MAX defines the time at which the outputs are no longer driven and is not referenced to output voltage levels. 11. For read or write operations with automatic deactivate, tRCD must be set to satisfy minimum tRAS . 12. Transition time, tT, is measured between VIH and VIL. PRODUCT PREVIEW
(SCL) and data (SDA) signals. All Texas Instruments modules comply with the current JEDEC SPD Standard. SPD contents for the TMxCN64EFH devices are listed in the following tables:. Table 1. Serial Presence Detect Data for the TM2CN64EFH
0 Defines number of bytes written into serial memory during module manufacturing 128 bytes 80h
1 Total number of bytes of SPD memory device 256 bytes 08h
3 Number of row addresses on this assembly 11 0Bh
4 Number of column addresses on this assembly 9 09h
5 Number of module rows on this assembly 1 bank 01h
6 Data width of this assembly 64 bits 40h
7 Data width continuation 00h
8 Voltage interface standard of this assembly LVTTL 01h
9 SDRAM cycle time at maximum supported CAS latency (CL), CL = X tCK = 10 ns A0h
11 DIMM configuration type (non-parity, parity, error correcting code [ECC]) Non-Parity 00h
13 SDRAM width, primary DRAM x8 08h
14 Error-checking SDRAM data width N/A 00h
15 Minimum clock delay, back-to-back random column addresses 1 CK cycle 01h
16 Burst lengths supported 1, 2, 4, 8 0Fh
17 Number of banks on each SDRAM device 2 banks 02h
18 CAS latencies supported 2, 3 06h
19 CS latency 0 01h
20 Write latency 0 01h
21 SDRAM module attributes Non-buffered/
22 SDRAM device attributes: general
23 Minimum clock cycle time at CL = X − 1 tCK = 15 ns F0h
25 Minimum clock cycle time at CL = X − 2 N/A 00h
10 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
Table 1. Serial Presence Detect Data for the TM2CN64EFH (Continued)
26 Maximum data-access time from clock at CL = X − 2 N/A 00h
27 Minimum row-precharge time tRP = 20 ns 14h
28 Minimum row-active to row-active delay tRRD = 20 ns 14h
29 Minimum RAS -to-CAS delay tRCD = 30 ns 1Eh
30 Minimum RAS pulse width tRAS = 50 ns 32h
31 Density of each bank on module 16M Bytes 04h
32 Command and address signal input setup time tIS = 2 ns 20h
33 Command and address signal input hold time tIH = 1 ns 10h
34 Data signal input setup time tIS = 2 ns 20h
35 Data signal input hold time tIH = 1 ns 10h
63 Checksum for byte 0−62 250 FAh
72 Manufacturing location† TBD
73 Manufacturer’s part number T 54h
74 Manufacturer’s part number M 4Dh
75 Manufacturer’s part number 2 32h
76 Manufacturer’s part number C 43h
77 Manufacturer’s part number N 4Eh
78 Manufacturer’s part number 6 36h
79 Manufacturer’s part number 4 34h
80 Manufacturer’s part number E 45h
81 Manufacturer’s part number F 46h
82 Manufacturer’s part number H 48h
83 Manufacturer’s part number − 2Dh
84 Manufacturer’s part number 1 31h
85 Manufacturer’s part number 0 30h
91 Die revision code† TBD
92 PCB revision code† TBD
126 Clock frequency 66 MHz 66h
127 SDRAM component and clock interconnection details 199 C7h
† TBD indicates that values are determined at manufacturing time and are module-dependent. ‡ These TBD values are determined and programmed by the customer (optional).
Table 2. Serial Presence Detect Data for the TM4CN64EFH
5 Number of module rows on this assembly 2 02h
12 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
Table 2. Serial Presence Detect Data for the TM4CN64EFH (Continued)
63 Checksum for byte 0−62 251 FBh
75 Manufacturer’s part number 4 34h
127 SDRAM component and clock interconnection details 247 F7h
† TBD indicates that values are determined at manufacturing time and are module-dependent. ‡ These TBD values are determined and programmed by the customer (optional).
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998 13POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 device symbolization (TM2CN64EFH) TM2CN64EFH -SS YYMMT YY = Year Code MM = Month Code T = Assembly Site Code -SS = Speed Code NOTE A: Location of symbolization may vary. Unbuffered Key Position 3.3-V Voltage Key Position PRODUCT PREVIEW
/C0084/C0077/C0050/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0050/C0257/C0048/C0057/C0055/C0257/C0049/C0053/C0050 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0084/C0077/C0052/C0067/C0078/C0054/C0052/C0069/C0070/C0072 /C0052/C0257/C0049/C0057/C0052/C0257/C0051/C0048/C0052 /C0066/C0089 /C0054/C0052/C0262/C0066/C0073/C0084 /C0083/C0089/C0078/C0067/C0072/C0082/C0079/C0078/C0079/C0085/C0083 /C0068/C0089/C0078/C0065/C0077/C0073/C0067 /C0082/C0065/C0077 /C0077/C0079/C0068/C0085/C0076/C0069/C0083 SMMS715 − MAY 1998
14 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
BS (R-PDIM-N168) DUAL IN-LINE MEMORY MODULE 0.118 (3,00) TYP 1.130 (28,70) 1.120 (28,45) 0.700 (17,78) TYP 0.014 (0,35) MAX 0.106 (2,70) MAX 0.054 (1,37) 0.046 (1,17) 4088181/A 06/97 0.157 (4,00) MAX (For Double Sided DIMM Only) (Note D) 5.255 (133,48) 5.245 (133,22) 0.118 (3,00) DIA
2 Places
0.125 (3,18) 0.039 (1,00) TYP Notch 0.157 (4,00) x 0.122 (3,10) Deep Notch 0.079 (2,00) x 0.122 (3,10) Deep 0.125 (3,18) 0.050 (1,27) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MO-161 D. Dimension includes De−panelization variations; applies between notch and tab edge. E. Outline may vary above notches to allow router/panelization irregularities. PRODUCT PREVIEW
(TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for
applications
design. Customers are responsible for their products and components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Clocks and Timers www.ti.com/clocks Digital Control www.ti.com/digitalcontrol Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony RF/IF and ZigBee Solutions www.ti.com/lprf Video Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2008, Texas Instruments Incorporated