TM23R-TO2

TM23P-88P HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

CAT 6 Data Wiring System Connectors TM23 Series NEW 2004.3 I Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2-1 data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such, these products easily support Gigabit Ethernet (1000BASE-T/10000BASE-TX), which is the next generation of high-speed applications. 2. A Product Lineup Focused on Building of a Complete System In addition to modular plugs, Hirose Electric offers box type outlets, patch panels, and wall outlets. Systems built using all components from the same manufacturer will assure stable data transfer. 3. Support of a Wide Variety of Manufacturers' CAT 6 Cable To assure high performance of the system we test and monitor data transfer using CAT 6 cables manufactured by different suppliers. (Refer to page 12 for recommended cables.) 100 Attenuation/PSNEXT (dB) CAT 6 PSNEXT standard valueCAT 6 PSNEXT standard value Measured valueMeasured value Measured valueMeasured value CAT 6 Attenuation standard valueCAT 6 Attenuation standard value CAT 6 PSNEXT standard value 1 10 100 1000 Measured value Measured value CAT 6 Attenuation standard value Permanent Link PSACR Frequency (MHz)

100 M ohms min. No flashover or insulation breakdown. 230 m ohms max. No electrical discontinuity of 5µs min. Contact resistance : 250m ohms max. No electrical discontinuity of 5µs. min. Contact resistance : 250m ohms max. Contact resistance : 250m ohms max. Contact resistance : 250 m ohms max. Insulation resistance : 100 M ohms min. Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) Insulation resistance: 100 M ohms min. (Dry state) Contact resistance: 250 m ohms max.

100 V DC

500 V AC / one minute

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. Acceleration of 490 m/s 2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axes. 200 cycles Temperature :-55±3ç ➝ +15ç to +35ç ➝ +85±2ç ➝ +15ç to +35ç Duration (Minutes): 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 5 cycles 500 hours at temperature of 40ç and humidity of 90% to 95%. 5% salt water/48 hours. 1. Insulation resistance 2. Withstanding voltage (between adjacent contacts) 3. Contact resistance 4. Vibration 5. Shock 6. Durability (mating/un-mating) 7. Temperature cycle 8. Humidity 9. Salt Spray Rating Current rating 1A Voltage rating 125V AC Operating temperature range -25ç to +60ç (Note) I Plugs, Boots I Specifications I Materials and Finishes Item Specification Conditions Insulator Contacts Strain relief clamp Polycarbonate Phosphor bronze Brass Color: Clear Contact area: Gold plated Nickel plated UL94V-0 Component Plugs Material Finish Remarks Insulator EPTR White (Standard color) Black, red, blue, yellow, green, orange, gray, light blue UL94V-0 Component Boots Material Finish Remarks Note: Includes temperature rise caused by current flow. I Ordering Information G Plugs Series name : TM23 Connector type P : Plug Size 8 : 8 contacts Inserted contacts 8P : 8 contacts 8P8-P-TM23 1 2 3 4 G Boots Series name : TM23 Connector type P : Plug Size 8 : 8 contacts BT : Boot BT8-P-TM23 1 2 3 4

Part No. TM23P-88P 222-2916-6 CL No. TM23P-88P (25) 5.4 10.05 10.05 (17.5) Contact No. 1 Connecter guide insert (Shown inserted) Contact No. 8 11.7 5.05 (12.9) 8.9 6.6 6.09 4.75 Plug body Connector guide insert * Strain relief clamp * (15.45) BOverview . Contact configured for CAT 6 performance. . 0.5 mm dia. solid wire or AWG #24 stranded wire. . Use with cables having external diameters of 5.4 mm to 6.8mm. . Strain relief clamp protects the contact/conductor termination areas. BMated with corresponding receptacle (Shown for reference only) * Supplied separately(1bag contains 1pcs.)

Part Number CL No. Color TM23P-8-BT(01) TM23P-8-BT(01) TM23P-8-BT(02) TM23P-8-BT(03) TM23P-8-BT(04) TM23P-8-BT(05) TM23P-8-BT(06) TM23P-8-BT(07) TM23P-8-BT(08) 222-2917-9-02 222-2917-9-01 222-2917-9-02 222-2917-9-03 222-2917-9-04 222-2917-9-05 222-2917-9-06 222-2917-9-07 222-2917-9-08 White Black Red Blue Yellow Green Orange Gray Light Blue TM23P-8-BT 13.4 (12) (4) 25.3 (17.2) (16.9) 10.8 10.8 8.8 (6.5) Ø6.8 (40) TM23P-88P Protected lock/release lever Ø6.8MAX BOverview . Dedicated boots for the TM23P-88P. . 9 color variations. . Halogen-free. . Protects the plug’s lock/release lever. BBoot installed

Note: To achieve CAT 6 performance, refer to TM23P-88P Cable Termination Procedure Manual(ETAD-E2415). Solid copper conductor: 0.5mm dia. Stranded copper conductor: AWG#24 (0.95mm to 1.05mm) (5.4mm to 6.8mm) Conductor Individual conductor insulation dia. Overall jacket dia. Filler Conductor Insulation Jacket I Recommended Cable Specification HRS marking side (For contact/conductor termination) A Reverse side (For cable strain relief clamp crimping) Part No. HT601-TM23/TM22P-88P 902-2128-1 CL No. * Changing the “A” Assembly parts to TM22 dedicated clamp parts will allow wiring of Hirose’s TM22P-88P plugs supporting CAT 5e. Body Applicator Item G Automatic Contact Termination Machine CM-105 AP105-TM23P-88P Part Number CL901-0005-4 CL901-2588-5 CL No. G Cable Strain Relief Clamp Crimping Jig (Manual operated) TM23P-88P/CK-MP(01) Part Number CL902-2130-3(01) CL No.

100 M ohms min. No flashover or insulation breakdown. 250 m ohms max. Contact resistance: 270m ohms max. Contact resistance: 270 m ohms max. Contact resistance: 270 m ohms max. IEC512-2 Test 2a: Millivolt level method. 200 cycles Temperature : -40±3ç ➝ +15ç to +35ç ➝ +70±2ç ➝ +15ç to +35ç Duration (Minutes): 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 5 cycles 5% salt water/48 hours. 1. Insulation resistance 2. Withstanding voltage (between adjacent contacts) 3. Contact resistance 4. Durability (mating/un-mating) 5. Temperature cycle 6. Salt Spray Rating Operating temperature range 0ç to +60ç (Note) I Box Type Outlets, Patch Panels, and Wall Outlets I Specifications Item Specification Conditions Jack Insulator Jack contacts IDC contact insulator IDC contacts Panel PBT Phosphor bronze Polycarbonate Phosphor bronze Polycarbonate Color: Black (Standard color) Contact area: Gold plated Color: White Tin-lead plated Color: Black UL94V-0 UL94V-0 UL94V-0 Component Patch Panels Material Finish Remarks I Materials and Finishes Box Type Outlets and Wall Outlets Insulator Contacts IDC contact insulator IDC contacts Case and top cover Dustproof shutter PBT Phosphor bronze Polycarbonate Phosphor bronze ABS Polyamide Color: Black (Standard color) Contact area: Gold plated Color: White Tin-lead plated Color: Cream White (Standard) UL94V-0 UL94V-0 UL94V-0 UL94V-0 Component Material Finish Remarks Note: Includes temperature rise caused by current flow. I Ordering Information Box type outlets Patch panels Wall outlets Series name : TM23 Connector type R : Jack Type TO : Box type outlet MPP : Patch panel KCJ : Wall outlet Number of ports1 : 1 port 2 : 2 ports 6 : 6 ports 24 : 24 ports 48 : 48 ports 1TO-PTM23 41 2 3 4

(38) (58) (24.5) Through hole (7mm max. cable dia.) Base Wiring tie (one included) I Box Type Outlets G 1 Port BOverview . Use of a 110 type connector allows termination with a standard industry tools. . Pin assignments comply with T568A and T568B wiring standards. . Supplied with dustproof shutter. . Provided with magnetic surface on the base. Part No. TM23R-TO1 222-2921-6 CL No. Cat 6 (54.4) (65) (24.5) Through hole (7mm max. cable dia.) Base Wiring ties (two included) G 2 Ports Part No. TM23R-TO2 222-2922-9 CL No. 654321 Cat 6 (185) (28.4) (70) Break-out hole, 19mm or 23mm dia. CablesBase (23) (19) Wiring ties (two included) G 6 Ports Part No. TM23R-TO6 222-2923-1 CL No.

. Use of a 110 type connector allows termination with a standard industry tools. . Pin assignments comply with T568A and T568B wiring standards. . Can be installed in 19-inch racks (EIA standard). . The panel body uses dielectric material making it lightweight, shock resistant and electrically insulated. Part No. TM23R-MPP24 222-2924-4 CL No. Part No. TM23R-MPP48 222-2925-7 CL No. G 48 Ports [TM23R-MPP24] Cat 6 3 4 5 6 7 8 9 1 01 11 2 1 31 41 51 61 71 8 1 92 02 12 22 32 421 (483) 465 (43.8) 31.8 (35.5) [TM23R-MPP48] Cat.6 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 123456 789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 (483) 465 (88.3) 76.3 (35.5) Screws, washers and wiring ties * Screws, washers and wiring ties ** * Supplied in bag (4 pcs. each in bag) ** Supplied in bag (4 pcs. of screws and washers, 8 pcs. of wiring ties in bag)

Part No. TM23R-KCJ 222-2926-0 CL No. TM23R-KCJ 6CABS T568B4 2 1 T568A4 2 1 768 768 (22.7) (21) (42) (44) (37) (30) Dustproof shutter Color code label Protective cover (22.7) BOverview . Use of a 110 type connector allows termination with a standard industry tools. . Pin assignments comply with T568A and T568B wiring standards. . Supplied with dustproof shutter. . Can be installed in JIS standard mounting frames.

Color: Black (Standard) White, red, blue, yellow, green, orange Contact area: Gold plated UL94V-0 UL94V-0 Component Material Finish Remarks I Ordering Information Jacks Series name : TM23 Connector type R : Jack Mounting style/termination type 5A : Right-angle/through hole Jack opening code 8 : For 8 contacts Number of inserted contacts 8 : 8 contacts 5885A-RTM23 1 2 3 4 5 100 M ohms min. No flashover or insulation breakdown. 230 m ohms max. No electrical discontinuity of 5µs min. Contact resistance : 250m ohms max. No electrical discontinuity of 5µs. min. Contact resistance : 250m ohms max. Contact resistance : 250m ohms max. Contact resistance : 250 m ohms max. Insulation resistance : 100 M ohms min. Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) Insulation resistance: 100 M ohms min. (Dry state) Contact resistance: 250 m ohms max. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 1 octave/min. conduct, 10 cycles to each 3 directions. Acceleration of 490 m/s 2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axes. 200 cycles Temperature : -55±3ç ➝ +5ç to +35ç ➝ +85±2ç ➝ +5ç to +35ç Duration(Minutes) : 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 5 cycles 500 hours at temperature of 40ç and humidity of 90% to 95%. 5% salt water/48 hours. 1. Insulation resistance 2. Withstanding voltage (between adjacent contacts) 3. Contact resistance 4. Vibration 5. Shock 6. Durability (mating/un-mating) 7. Temperature cycle 8. Humidity 9. Salt Spray Rating Current rating 1A Voltage rating 125V AC Operating temperature range -25ç to +80ç (Note) I Jacks I Specifications Item Specification Conditions Note: Includes temperature rise caused by current flow.

Note: The jack by itself does not clear CAT 6 performance requirements. Compensation on the board is required to secure CAT 6 performance. I Jacks Part Number CL No. Color TM23R-5A-88(02) TM23R-5A-88(01) TM23R-5A-88(02) TM23R-5A-88(03) TM23R-5A-88(04) TM23R-5A-88(05) TM23R-5A-88(06) 222-2918-1-01 222-2918-1-01 222-2918-1-02 222-2918-1-03 222-2918-1-04 222-2918-1-05 222-2918-1-06 Black White Red Blue Yellow Green Orange BOverview . Unique contact structure designed for crosstalk reduction. . (Through hole : 3 rows) . Available in 7 colors. . Temporary retention to board with integral flexible posts. BPCB mounting pattern Connector front edge 1.016 3.048 5.08 7.112 1.3 2.544 Recommended board thickness: 1.6mm 8-Ø0.8 2-Ø2.4 14.56 Contact No. 8 Contact No. 1 Flexible post 0.43 42.54 1.3 2.10.35

I Precautions in System Construction The TM23 Series connector and components were designed for CAT 6 data transfer. However, it is highly recommended that the entire connected system be checked for this performance level. Cable termination procedure manual No. ETAD-E2415 TM23P-88P ATAD-E2407 TM23R-TO1 ATAD-E2408 TM23R-TO2 ATAD-E2409 TM23R-TO6 ATAD-E2410 TM23R-MPP24 ATAD-E2411 TM23R-MPP48 ATAD-E2412 TM23R-KCJ Part Number G Cable termination procedures Manufacturer's Name Web Site Tonichi Kyosan Cable, Ltd. http://www.tonichi-kyosan.co.jp/ G Recommended Cable Manufacturers Hirose Electric closely examines the transfer performance of these connectors with the CAT 6 cable that is manufactured and sold by the various cable manufacturers. Please use the cable from among those indicated in Table 1 for system construction with the TM23 Series. G Use of Different Manufacturers' Components Use of different manufacturers' components in one system could cause the deterioration of transfer performance. G Check of the System Performance Verification All measures have been taken to assure the transfer performance of the TM23 series. However, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. Hirose Electric does not build wiring systems. Please contact Hirose Electric sales representative for system construction contractor information. Note: Please see the web sites of the various manufacturers for cable specifications. Contact HRS for recommendations when using cables from other suppliers. Table1 Recommended Cable Manufacturers

Permanent link adapter (PM06) Horizontal cable 90 m TM23R-MPP24 TM23R-T01 100 Attenuation/PSNEXT (dB) CAT 6 PSNEXT standard value Measured value Measured value CAT 6 Attenuation standard value CAT 6 PSNEXT standard value 1 10 100 1000 Measured value Measured value CAT 6 Attenuation standard value .Permanent Links Permanent Link PSACR Frequency (MHz) DSP4300 Main unit Channel link adapter DSP4300 Remote unit Horizontal cable 90 m TM23R-MPP24 Stranded wire 3 m Patch cable 2 m TM23R-T01 ( :TM23P-88P) Patch cable 5 m CAT 6 PSNEXT standard value Measured value Measured value CAT 6 Attenuation standard value 100 Attenuation/PSNEXT (dB) CAT 6 PSNEXT standard value 1 10 100 1000 Measured value Measured value CAT 6 Attenuation standard value .Channel Links Channel Link PSACR Frequency (MHz) Measured value CAT 6 RL standard valueCAT 6 RL standard value RL(dB) 1 10 100 1000 Measured value CAT 6 RL standard value .Patch Cable Patch Cable 2 m RL Frequency (MHz) Measured valueMeasured value CAT 6 NEXT standard valueCAT 6 NEXT standard value 120 100 NEXT(dB) 1 10 100 1000 Measured value CAT 6 NEXT standard value Patch Cable 2 m NEXT Frequency (MHz) DSP4300 Main unit Channel link adapter Patch Cable 2 m DSP4300 Remote unit I Technical Documentation G CAT 6 Transmission Characteristics Data This is representative transfer performance for the TM23 Series. A high margin is used for CAT 6 standard values.