TM21P-88P HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Modular Plug Connectors Compliant to Enhanced Category 5 Standards NEW 2002.11 I Features 1. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B data wiring standard, meeting transmission performance of Enhanced Category 5. Supports Gigabit Ethernet (1000BASE-T) and Fast Ethernet (100BASE-TX) high-speed LAN transmission. 2. EMI protection (TM21*P-88P) 360° coverage of the engagement area with a metal shield assures protection against electromagnetic interference. When mated with corresponding connector the shield surfaces are securely connected to provide continuous circuit. 3. Protected latch tab (TM21P-88P) Flexible case extends over the release tab preventing the possibility of breaking-off during handling of the complete cable assembly. 4. Termination of conductors Self located 24 AWG conductors (solid or stranded) are terminated against pre-inserted contacts using simple tooling. 5. Simplified termination (TM21*P-88P) Removeable one piece cover allows easy access to the termination areas. 6. Conforms to the ISO 8877 Standard (ISDN Interface Connector) I Applications Telecom Hubs, Routers, Bridges and ATM Transmission Equipment, Ethernet Switches and Networking Equipment, Test and Measurement Equipment and other equipment requiring this type of simple and reliable connection. TM21P Series (Shielded Type) TM22P-88P (Non-shielded Type) ᶃ Protected latch tab Cover Installation Procedure ᶃᶄ ᶃ

Operating temperature range-25ç to +60ç(Note) I Materials Insulator Polycarbonate Color: Clear UL94V-2 Conductor holding tray Polycarbonate Color: Clear UL94V-2 Cover Polyamide Color: Light beige (Note) UL94V-2 Part Material Finish Remarks Note :Includes temperature rise caused by current flow. Item Specification Conditions 1. Insulation resistance 100 M ohms min. 100 V DC 2. Withstanding voltageNo flashover or insulation breakdown 500 V AC / one minute(between adjacent contacts) 3. Withstanding voltageNo flashover or insulation breakdown 1500 V AC / one minute(between contact and shield) 4. Contact resistance 230 m ohms max. 100mA DC 5. Vibration No electrical discontinuity of 5 ms or more Contact resistance: 250m ohms max. 6. Shock No electrical discontinuity of 5 ms. min. Contact resistance: 250m ohms max. 7. Durability Contact resistance: 250m ohms max. 200(mating/un-mating) 8. Temperature cycle Contact resistance: 250 m ohms max. Insulation resistance: 100 M ohms min. 9. Humidity Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity)500 hours at temperature of 40ç and humidity of 90% to 95% Insulation resistance: 10 M ohms min. (Dry state) 10. Salt Spray Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours Temperature: -55ç/+5ç to +35ç/+85ç/+5ç to +35ç Duration: 30/5/30/5(Minutes) 5 cycles Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis Note :Cover available in various colors. Refer to page 3. I Ordering information Series name TM21P: Shielded Cover Type Blank: Protective latch cover C: Short cover Size 8: For 8 contacts Inserted contacts 8P: 8 TM21 C P - 8 8P 1 2 1 3 4 G Plugs- Shielded Series name TM22P : Non-shielded Size 8 : For 8 contacts Inserted contacts 8P: 8 TM22P - 8 8P 1 32 G Plugs - Non-shielded

Part Number CL No. TM21P-88P TM21P-88P (02) TM21P-88P (03) TM21P-88P (04) TM21P-88P (05) TM21P-88P (06) TM21P-88P (07) TM21P-88P (08) TM21P-88P (09) Cover Color Light beige Medium gray Black Natural light gray Red Green Blue Yellow Orange 222-2862-9-02 222-2862-9-02 222-2862-9-03 222-2862-9-04 222-2862-9-05 222-2862-9-06 222-2862-9-07 222-2862-9-08 222-2862-9-09 (44.65)(13.4) (34) $POUBDU/P8$POUBDU/P 29.5 16.6 (34) 3.5) 6.7 $POEVDUPSIPMEJOHUSBZ $PWFS 30.2 12.9 6.6 (0.6) 17.5 6.09 11.7 9.05 5.4 3.45 BCover installed BMated with corresponding receptacle (shown for reference only)

BApplicable Shielded Cable Specifications BMated with corresponding receptacle (shown for reference only) Note: For cable termination procedures refer to: TM21P-88P Cable Termination Procedure Manual and [TM21CP-88P Cable termination Procedure Manual] (ETA-E2353). Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications recommendations. I Plug Connectors Note: For other colors contact Hirose sales representative. Cover Contact No.8Contact No.1 Conductor holding tray 30.2 12.9 6.6 (0.6) 17.5 (22.4) 10.4 6.7 17.2 (R3.5) TM21CP-8 TM21CP-8 6.09 11.7 9.05 5.4 3.45 (13.4 ) (32.35) TM21CP-8 (21.7)TM21CP-8 Part Number CL No. TM21CP-88P (03) Cover color Black222-2884-1-03 Specifications Solid copper conductor: 0.5mm dia. Stranded copper conductor: AWG#24 (Dia. 0.2mm x 7 pcs) (0.9mm to 1.0mm) AWG#26 (tin coated) (dia. 6.6mm) Conductor Individual conductor insulation dia. Drain wire Overall jacket dia. G Shielded-Short Cover Jacket Shield Conductor Insulation Drain wire

Solid copper conductor: 0.5mm dia. Stranded copper conductor: AWG#24 (Dia. 0.2mm x 7 pcs) (0.9mm to 1.0mm) (dia. 5.4mmto 5.7mm) Conductor Individual conductor insulation dia. Overall jacket dia. Insulation Jacket Conductor BMated with corresponding receptacle (shown for reference only) BApplicable Non-shielded Cable Specifications Note: For cable termination procedures refer to: TM22P-88P Cable Termination Procedure Manual. Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications recommendations. Contact No.8Contact No.1 Conductor holding tray 6.6 9.05 3.45 5.4 (0.6) 22.5 6.09 11.7 14.2 7.9 (11.85) I Plug Connectors Part Number CL No. TM22P-88P 222-2899-9 G Non-shielded

Part Number CL No. HT205/TM21P-88P 250-0234-4 G For contact/conductor termination Part Number CL No. HT206/TM21P-88P 250-0235-7 G For cable and shield crimping (Shielded connectors only) Part Number CL No. HT501/TMP-88 902-2111-9* G For contact/conductor termination (Non-shielded connectors) *Scheduled for release soon. Please contact your Hirose Electric account representative for information.

G CAT5e Transmission Characteristics Data These are the representative values of the various transmission characteristics data for connector assemblies TM21P-88P and TM21R-5C-88-LP when fully mated. All plugs in the TM21R-5C Series that were manufactured based on the De-embedded method of the TIA/EIA- 568-B.2 standard meet requirements of CAT5e single transmission performance. (Each two numbers are for the pair of individual contact position.)

  • Signal Attenuation 0.1 0.2 0.3 0.4 0.5 01 02 03 04 05 06 07 08 09 01 0 0 Frequency(MHz) Attenuation(dB) 1,2 3,6 4,5 7,8 CAT5e Spec 100 120 01 02 03 04 05 06 07 08 09 01 0 0 Frequency(MHz) NEXT(dB)
  • Near-End Crosstalk Attenuation (NEXT) 01 02 03 04 05 06 07 08 09 01 0 0 Frequency(MHz) Return Loss(dB) 1,2 3,6 4,5 7,8 CAT5e Spec
  • Return Loss
  • Far-End Crosstalk Attenuation (FEXT) 100 120 01 02 03 04 05 06 07 08 09 01 0 0 Frequency(MHz) FEXT(dB) 1,2-3,6 3,6-4,5 4,5-7,8 CAT-5e Spec 3,6-1,2 4,5-3,6 7,8-4,5 1,2-7,8 4,5-1,2 7,8-3,6 1,2-4,5 3,6-7,8 7,8-1,2 0.5 1.5 2.5 01 02 03 04 05 06 07 08 09 01 0 0 Frequency(MHz) Delay(ns) 1,2 3,6 4,5 7,8 CAT5e Spec
  • Propagation Delay 0.2 0.4 0.6 0.8 1.2 1.4 01 02 03 04 05 06 07 08 09 01 0 0 Frequency(MHz) Delay Skew(ns) .FBTVSFNFOU7BMVF CAT5e Spec
  • Propagation Delay skew (Each two numbers are for pair of individual contact position.) 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE:81-3-3491-9741 FAX:81-3-3493-2933 http://www.hirose.com HIROSE ELECTRIC CO., LTD. CreativeLinks to W orld Electronics The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.