TM18 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

  • Heavy duty metal housing with 18 mm threaded barrel mount and integral metal QD prevents sensor damage during machine assembly, transport, maintenance, and operation
  • Right angle "T" mounting fits in tight places, prevents sensor damage, and avoids personnel catch points
  • Models with dedicated 3-wire output NPN or PNP for OEM machine builders — designed to work with I/O block splitters for reduced wiring costs
  • Models with 4-wire complementary NPN or PNP outputs available
  • Featuring EZ-BEAM technology provides reliable sensing without adjustments
  • Visible red LED models available in opposed, polarized retroreflective, diffuse, and fixed-field (background suppression) modes
  • Infrared models available in fixed-field (background suppression) mode
  • Completely epoxy encapsulated electronics to provide superior durability, especially in harsh sensing environments
  • Sensors rated IP69K for resistance to intermittent high pressure washdown
  • Innovative dual indicator systems takes the guess work out of sensor performance monitoring
  • Enhanced immunity to fluorescent lights on fixed field and diffuse sensors
  • Cross talk avoidance allows two sensors to be used in close proximity on polarized retro, diffuse, and fixed field sensors To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. For example, "TM186E W/30". To order the 4-pin Euro M12 integral QD models, add suffix Q8 (for example, TM186EQ8). To order the 4-pin Euro M12 pigtail QD models: add suffix Q5 (for example, TM186EQ5). Opposed Mode Sensors Model Number Mode Range LED Output TM186E OPPOSED 20 m Visible red 625 nm None TM18AP6R None PNP, LO 3-wire TM18RP6R PNP, DO 3-wire TM18VP6R PNP, LO/DO 4-wire TM18AN6R NPN, LO 3-wire TM18RN6R NPN, DO 3-wire TM18VN6R NPN, LO/DO 4-wire Polarized Retroreflective Model Number Mode Range LED Output TM18AP6LP P POLAR RETRO 5.5 m 1 Visible red 624 nm PNP, LO 3-wire TM18RP6LP PNP, DO 3-wire TM18VP6LP PNP, LO/DO 4-wire TM18AN6LP NPN, LO 3-wire TM18RN6LP NPN, DO 3-wire TM18VN6LP NPN, LO/DO 4-wire 1 Range specified with BRT-84 reflector. TM18 Series Sensors Original Document 155853 Rev. F

3 September 2015

Fixed-Field Background Suppression Model Number Mode Range LED Output TM18AP6FF25 FIXED-FIELD 25 mm Visible red 660 nm PNP, LO 3-wire TM18VP6FF25 PNP, LO/DO 4-wire TM18AN6FF25 NPN, LO 3-wire TM18VN6FF25 NPN, LO/DO 4-wire TM18AP6FF50 50 mm PNP, LO 3-wire TM18VP6FF50 PNP, LO/DO 4-wire TM18AN6FF50 NPN, LO 3-wire TM18VN6FF50 NPN, LO/DO 4-wire TM18AP6FF100 100 mm PNP, LO 3-wire TM18VP6FF100 PNP, LO/DO 4-wire TM18AN6FF100 NPN, LO 3-wire TM18VN6FF100 NPN, LO/DO 4-wire TM18AP6FF25IR FIXED-FIELD 25 mm Infrared, 880 nm PNP, LO 3-wire TM18VP6FF25IR PNP, LO/DO 4-wire TM18AN6FF25IR NPN, LO 3-wire TM18VN6FF25IR NPN, LO/DO 4-wire TM18AP6FF50IR 50 mm PNP, LO 3-wire TM18VP6FF50IR PNP, LO/DO 4-wire TM18AN6FF50IR NPN, LO 3-wire TM18VN6FF50IR NPN, LO/DO 4-wire TM18AP6FF100IR 100 mm PNP, LO 3-wire TM18VP6FF100IR PNP, LO/DO 4-wire TM18AN6FF100IR NPN, LO 3-wire TM18VN6FF100IR NPN, LO/DO 4-wire Diffuse Visible Mode Model Number Mode Range LED Output TM18AP6DV DIFFUSE 500 mm Visible red 660 nm PNP, LO 3-wire TM18RP6DV PNP, DO 3-wire TM18VP6DV PNP, LO/DO 4-wire TM18AN6DV NPN, LO 3-wire TM18RN6DV NPN, DO 3-wire TM18VN6DV NPN, LO/DO 4-wire WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. TM18 Series Sensors 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 155853 Rev. F

Supply Voltage and Current - Class 2 10 to 30 V dc (10% max. ripple within specified limits); supply current (exclusive of load current): Emitters: 25 mA Receivers: 20 mA Polarized Retroreflective: 20 mA Diffuse and Fixed-Field: 35 mA Supply Protection Circuitry Protected against reverse polarity and transient voltages Effective Beam 13 mm for opposed mode sensors Output Configuration NPN (current sinking) or PNP (current sourcing), depending on model Light Operate: Output conducts when sensor receives its own (or the emitter’s) modulated light Dark Operate: Output conducts when sensor does not receive it own (or the emitter fts) modulated light Connections 2 m (6.5 ft) or 9 m (30 ft) PVC attached cable Integral 4-pin M12/Euro-style quick disconnect 4-pin M12/Euro-style PVC pigtail quick disconnect Construction Housing: Zinc die cast with nickel plating Lens: PMMA or PC (opposed mode only) Black Cover: PBT polyester housing Adjustments Diffuse models only: single turn rear panel sensitivity control Indicators Two LEDs (green and amber) Complementary (4-Wire) Models Indicator Description Green ON Power ON Green Flashing* Output is overloaded Amber ON N.O. Output is conducting Amber Flashing* Marginal excess gain (1 to 1.5x) * Not valid for Diffuse or Fixed Field Models. Single Output (3-Wire) Models Indicator Description Green ON Power ON Green Flashing N.A. Amber ON Output is conducting Amber Flashing N.A. Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs Output Rating 150 mA maximum each output at 25 °C, derated to 100 mA at 70 °C (derate about 1 mA per °C) OFF-state leakage current: < 1 microamp at 30 V dc ON-state saturation voltage: < 1 V at 10 mA dc; < 1.5 V at 150 mA dc Output Response Time (TM18) Opposed mode: 1.5 ms ON, 0.75 ms OFF Retro: 3 ms ON and OFF Diffuse and Fixed Field: 3 ms ON, 1.5 ms OFF Note: 100 ms delay on power-up; outputs do not conduct during this time. Repeatability (TM18) Opposed mode: 190 µs Retro: 585 µs Diffuse and Fixed Field: 185 µs Environmental Rating IEC IP67; quick disconnect models are IEC IP69K when mated with a washdown rated (IEC IP69K) cordset Operating Conditions 90% at +50 °C maximum relative humidity (non-condensing) Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max., double amplitude 0.06 in acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation) Certifications Class 2 supply Required; Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to http:// www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 TM18 Series Sensors P/N 155853 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 3

1 m 10 m 100 m0.1 m DISTANCE EXCESS GAIN TM18E&RExcess Gain 5 m 10 m 15 m 20 m 100 mm 100 mm 200 mm 200 mm 300 mm 300 mm 500 mm 500 mm 400 mm 400 mm DISTANCE TM18E&RBeam Pattern Polarized Retroreflective Excess Gain Beam Pattern DISTANCE 100 1000EXCESS GAIN TM18LPPolarized Retroreflectivewith BRT-84 Reflector 20 mm 40 mm 1 m2 m3 m4 m5 m6 m 60 mm 20 mm 40 mm 60 mm DISTANCE TM18LPBeam Pattern TM18 Series Sensors 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 155853 Rev. F

DISTANCE (mm) 100 1 1 10 100 1000 1000EXCESS GAIN TM18 Diffuse 5 mm 10 mm 100200300400500600 15 mm 5 mm 10 mm 15 mm DISTANCE (mm) TM18 DiffuseBeam Pattern Fixed Field (Visible Red and Infrared) Excess Gain 25 mm 50 mm 100 mm DISTANCE (mm) 100 10.1 1 10 100 1000EXCESS GAIN TM18FF 25 mm10 mm spot size at 10 mm10 mm spot size at 25 mm DISTANCE (mm) 100 10.1 1 10 100 1000EXCESS GAIN TM18FF 50 mm10 mm spot size at 25 mm10 mm spot size at 50 mm DISTANCE (mm) 100 10.1 1 10 100 1000EXCESS GAIN TM18FF 100 mm10 mm spot size at 50 mm10 mm spot size at 100 mm

  • Using 18% gray test card: Cutoff distance will be 95% of value shown.
  • Using 6% black test card: Cutoff distance will be 90% of value shown.
  • Using 18% gray test card: Cutoff distance will be 90% of value shown.
  • Using 6% black test card: Cutoff distance will be 85% of value shown.
  • Using 18% gray test card: Cutoff distance will be 85% of value shown.
  • Using 6% black test card: Cutoff distance will be 75% of value shown. TM18 Series Sensors P/N 155853 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 5

[1.18”] 41.1 mm [1.62”]26 mm [1.03”] M18 x 1 6g CL CL M18 x 1 6g 30 mm [1.18”] 15 mm [0.59”] 30 mm dia [1.18”] M12 x 1 6g 49 mm [1.93”] 34 mm [1.34”] 15 mm [0.59”] 30 mm [1.18”] Maximum Torque specification: 5.6 nm or 50 in-lbs. Lockwasher and M18 nut included. Wiring Emitter 10 - 30V dc1 NPN L.O. 3-Wire 10 - 30V dc 413 Load PNP L.O. 3-Wire 10 - 30V dc Load Wiring Key 1 = Brown 2 = White 3 = Blue 4 = Black NPN D.O. 3-Wire 10 - 30V dc 413 Load PNP D.O. 3-Wire 10 - 30V dc Load TM18 Series Sensors 6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 155853 Rev. F

QD and cabled emitter wiring functionality is identical; black and white wires have no connection when not shown. NPN L.O./D.O. 4-Wire 10 - 30V dc Load Load PNP L.O./D.O. 4-Wire 10 - 30V dc Load Load Accessories Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) Apertures AP18SCN Used with T18, TM18 models. AP18SRN Each kit also includes a thread-on housing, Teflon® FEP® lens, and o-ring. Used with T18, TM18 APG18S Kit with glass lens to protect plastic sensor lens from chemical environments and weld splatter damage. Used with S18, M18, T18, TM18, and Q4X TM18 Series Sensors P/N 155853 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 7

Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. TM18 Series Sensors www.bannerengineering.com - Tel: +1-763-544-3164