TM12 SCHURTER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

www.schurter.com34 Produktebeschreibung Der Geräteschutzschalter (CBE) TM12 ist ein einpoliger Überlast- Schutzschalter mit thermisch-magnetischer Auslösung. Er ist ein platzsparender, kostengünstiger und zuverlässiger Schutzschalter mit Freiauslösung bei Überlast und Kurzschlüssen innerhalb der maximalen Abschaltleistung. Er wird vor allem zum Überstromschutz von empfindlichen Instrumenten etc. eingesetzt. Er ist nur dann geeignet für Leitungsschutz, wenn der voraussichtliche Kurzschluss- Gewindehals- und Flanschbefestigungs-Typen sind erhältlich in zwei Betätigungsarten, mit Nebenanschluss und Hilfskontakt. Bei einigen Typen stehen im weitern Schraubklemmen-Anschlüsse zur Auswahl. Der speziell konstruierte und bewährte Mechanismus öffnet die Kontakte im Falle einer Überlast. Ein Bimetallstreifen wird durch den Überstrom erhitzt und gebogen und betätigt den Auslösemechanis- mus. Wenn der Überstrom genügend hoch ist, wird der magnetische Auslöser aktiviert und löst den Mechanismus sofort aus. Zwei Kenn- linien der magnetischen Auslösung sind erhältlich. Bei der T-Kennli- nie erfolgt die magnetische Auslösung bei 8-12 In, bei der F-Kennlinie erfolgt die Auslösung bei einem tieferen Wert (4-8 In). Im Falle einer Überlast werden die Kontakte selbst dann geöffnet, wenn der Einschaltknopf manuell in die Schliessposition gehalten wird. Dies ist ein Freiauslösungs-Merkmal. Die Kontakte werden durch einen Sprungvorgang geöffnet und geschlossen. Die Ausschal- tung ist durch das Vorstehen des Einschaltknopfes ersichtlich. Zum Wiedereinschalten der Kontakte muss der Rückstell- resp. Einschalt- Knopf zuerst vollständig hinuntergedrückt und dann losgelassen werden. Die Kontakte können nicht durch sanften Druck auf den Einschalt- knopf bei geringem Kontaktdruck geschlossen werden. Ausführungs-Varianten

  • Schnelle und träge magnetische Auslösekennlinien
  • Flanschbefestigung
  • Gewindehalsbefestigung
  • Betätigungsarten: Reset- oder manuelles Ein/Aus (Druck/Druck)
  • Anschlüsse: Flachstecker oder Schraubanschlüsse
  • Unabhängiger Hilfskontakt (Wechsler)
  • Nebenanschluss
  • Stellungsanzeige am Rückstellknopf visualisiert den Schaltzustand Besondere Merkmale
  • Günstiger Preis
  • Flachsteckeranschlüsse
  • Mehrere Montagearten
  • Positive Freiauslösung
  • Unempfindlich gegen Schock und Vibration
  • UL, CSA, VDE und weitere Approbationen Product description The TM12 circuit breaker for equipment (CBE) is a single pole, ther- mal-magnetically operated device providing small size, low cost and reliable trip-free operation on overloads and short circuits within the maximum breaking capacity. It is intended primarily for the protection of circuit control functions in sensitive instruments etc. It is not generally suitable for line protection unless the prospective short cir- Threaded neck and flange mounting types are available each with optional push on/push off mechanism, shunt terminal and auxiliary contact. There is also a choice of screw clamp terminals on certain types. The well proven mechanism is designed to open the contacts in the event of overloads. A bimetal strip is heated by the overcurrent and deflects, thereby releasing the latch mechanism. If the overcurrent is sufficiently high, the magnetic release will operate and open the circuit instantaneously. Two characteristics are available. The more commonly used T characteristic has operating limits between 8-12 times the rated current. The optional F characteristic operates at a lower current levels of 4-8 times the rated current. In case of overloads, the contacts will open even if the reset button is manually held in the closed position. This is known as a trip-free feature. The contacts open and close with a snap action and the tripped state is clearly shown by the increased projection of the reset button. After the opening operation, the reset button has to be fully depressed, then released, to effect a closing of the contact. It is impossible to «tease» the contacts by gentle pressure on the reset button. Available options
  • Fast and slow magnetic tripping characteristics
  • Flange type
  • Threaded neck type
  • Type of actuation: reset or manual ON/OFF (push/push)
  • Terminals: quick connect or screw clamp terminals
  • Independent auxiliary contact (change-over contact)
  • Shunt terminal
  • Setting indication on reset button indicates the position of the contacts Special features
  • Competitive pricing
  • Quick connect terminals
  • Choice of mounting styles
  • Positively trip-free
  • Insensitive to shock or vibration
  • UL, CSA, VDE and other approvals CIRCUIT BREAKERS FOR EQUIPMENT GERÄTESCHUTZSCHALTER TM12

www.schurter.com 35 Beispiel Nennstrom bei +23°C 5,0 A Umgebungstemperatur +50°C Korrekturfaktor 1,2 Gewählter Nennstrom bei +50°C Umgebungstemperatur 5,0 A x 1,2 = 6,0 A Umgebungs- Korrekturfaktor temperatur [°C] -5 0,87 0 0,90 +10 0,95 +23 1,00 +30 1,05 +40 1,12 +50 1,20 +60 1,30 Einfluß der Umgebungstemperatur Die Eichung gilt für eine Umgebungs- temperatur von +23°C. Zur Bestimmung des Nennstromes für eine tiefere oder höhere Umgebungstemperatur ist ein Korrekturfaktor gemäß untenstehender Tabelle zu verwenden: Rated current / Nennstrom < 7,0 A ≥ 7,0 A Ambient temp. Umgebungstemp. +23 °C 10'000 [ sec ][ min ]Tripping time / Auslösezeit Multiple of rated current Nennstrom-Vielfaches [ x In ] 1 ,05 10 85421 ,32 50 20 0,0001 0,001 0,01 0,1 100 1'000 TMTTMF Technical data / Technische Daten Main circuit / Hauptstromkreis: Rated voltage Ue See approvals, page 36 AC 240 V; DC 28 V Nennspannung Ue Siehe Approbationen Seite 36 AC 240 V; DC 28 V Rated current In See approvals, page 36 AC/DC 0,05 – 16 A Nennstrom In Siehe Approbationen Seite 36 AC/DC 0,05 – 16 A Conditional short circuit current Inc EN 60934 PC1, AC 240 V 1000 A Bedingtes Schaltvermögen Inc EN 60934 PC1, AC 240 V 1000 A Short circuit capacity Icn AC 240 V 200 A AC/DC 28 V 400 A Schaltvermögen Icn AC 240 V 200 A AC/DC 28 V 400 A Auxiliary circuit / Hilfsstromkreis: Rated voltage Ue See approvals, page 36 AC 120 V, 240 V; DC 28 V Nennspannung Ue Siehe Approbationen Seite 36 AC 120 V, 240 V; DC 28 V Rated current In See approvals, page 36 1,0; 2,0; 3,0 A Nennstrom In Siehe Approbationen Seite 36 1,0; 2,0; 3,0 A Class of protection Between live and accessible parts II Other parts I Schutzklasse für Geräte Zwischen aktiven Teilen und Betätigungsteil II Übrige Teile I Example Rated current at +23°C 5,0 A Ambient temperature +50°C Correction factor 1,2 Chosen rated current at +50°C ambient temperature 5,0 A x 1,2 = 6,0 A Tripping characteristics TMF + TMT Auslösekennlinien TMF + TMT Ambient Correction factor temperature [°C] -5 0,87 0 0,90 +10 0,95 +23 1,00 +30 1,05 +40 1,12 +50 1,20 +60 1,30 Effect of ambient temperature The unit is calibrated for an ambient tem- perature of +23°C. To determine the rated current for a lower or higher ambient temperature, use a correction factor from the table below: CIRCUIT BREAKERS FOR EQUIPMENT GERÄTESCHUTZSCHALTER TM12

www.schurter.com36 Approvals / Approbationen Main circuit / Hauptstromkreis Auxiliary circuit / Hilfsstromkreis EVD Rated Rated Rated Rated Rated Rated current range voltage AC voltage DC current voltage AC voltage DC Nennstrom- Nenn- Nenn- Nennstrom Nenn- Nenn- bereich spannung AC spannung DC spannung AC spannung DC UL UL 1077 0,05 – 16 A 240 V 28 V 3 A 28 V

2 A 120 V

CSA CSA C22.2 235 0,05 – 16 A 240 V 28 V 1 A 240 V VDE EN 60934 0,05 – 16 A 240 V 28 V 1 A 240 V 28 V SEMKO EN 60934 0,05 – 16 A 240 V 1 A 240 V NEMKO 0,05 – 16 A 240 V 1 A 240 V DEMKO 0,05 – 16 A 240 V 1 A 240 V SEV EN 60934 0,05 – 16 A 240 V 28 V 1 A 240 V 28 V Technical data (continued) / Technische Daten (Fortsetzung) Degree of protection Accessible range IP40 Termination range IP00 Schutzgrad Betätigungsbereich IP40 Anschlußbereich IP00 Dielectric strength Accessible range AC 4000 V Spannungsfestigkeit Betätigungsbereich AC 4000 V Insulation resistance DC 500 V >100 M Ω Isolationswiderstand DC 500 V >100 M Ω Endurance Number of cycles at 6 x In (AC) R-type 40 Number of cycles at In S-type 5000 Lebensdauer Anzahl Schaltspiele bei 6 x In (AC) R-Typ 40 Anzahl Schaltspiele bei In S-Typ 5000 Permissible ambient temperature -5°C to +60°C Zulässige Umgebungstemperatur -5°C bis +60°C Vibration resistance IEC 60068-2-6, Test Fc, 10 g 1 mm amplitude 5-60 Hz, 60-500 Hz Schwingungsfestigkeit IEC 60068-2-6, Test Fc, 10 g 1mm Amplitude 5-60 Hz, 60-500 Hz Shock resistance IEC 60068-2-27, Test Ea 100 g Stossfestigkeit IEC 60068-2-27, Test Ea 100 g Type of actuation • Reset type R

  • Manual ON/OFF (push/push) S Betätigungsart • Reset Typ R
  • Manuell EIN/AUS (Druck/Druck) S Type of tripping • Thermal-magnetic TM
  • Positively trip-free Auslöseart • Thermisch-magnetisch TM
  • Positive Freiauslösung Weight approx. 33 g Gewicht ca. 33 g CIRCUIT BREAKERS FOR EQUIPMENT GERÄTESCHUTZSCHALTER TM12

www.schurter.com 37 Order code / Bestellcode Basic type / Grundtyp TM Single pole thermal magnetic overload protection switch, positively trip-free Einpoliger thermisch-magnetischer Überstromschutzschalter mit positiver Freiauslösung Magnetic release range / Magnetischer Auslösebereich F Fast / flink 4 – 8 x In T Slow / träge 8 – 12 x I n Mounting style / Montageart

1 Flange type

2 Threaded neck type M10 x 1, with hexagonal- and knurled nut

Gewindehalsbefestigung M10 x 1, mit Sechskant- und Rändelmutter Actuation type / Betätigungsart

1 Reset type (R-type)

Reset Typ (R-Typ)

2 Manual ON/OFF (push/push) (S-type)

Manuell EIN/AUS (Druck/Druck) (S-Typ) Terminal type / Anschlußart 1 6,3 x 0,8 mm quick connect terminals IEC 61210 6,3 x 0,8 mm Flachstecker IEC 61210

2 Screw clamp terminals*

Schraubklemmen* * Not available with S-auxiliary contact or N-shunt terminal * Nicht lieferbar mit den Bauform-Varianten S Hilfskontakt und N Nebenanschluss Construction variants / Bauform-Varianten * S Auxiliary contact Hilfskontakt N Shunt terminal only for rated currents <7 A Nebenanschluß nur für Nennströme <7 A R Setting indication on reset button Stellungsanzeige am Rückstellknopf * (S; N; R; SN; SR; NR; SNR) Rated current / Nennstrom [A] 0,05 0,1 0,15 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 7,5 8,0 8,5 9,0 9,5 10 11 12 13 14 15 16 Other rated currents by request / Andere Nennströme auf Anfrage The magnetic tripping range is valid for AC. For DC the stated magnetic currents are approx. 1,6 x higher. Die magnetischen Auslösebereiche gelten für Wechselstrom. Für Gleichstrom liegen die magnetischen Anprechströme ca. um den Faktor 1,6 höher. T M 1 2 – 2 1 1 S N R – Order example / Bestellbeispiel0,15F CIRCUIT BREAKERS FOR EQUIPMENT GERÄTESCHUTZSCHALTER TM12

www.schurter.com38 Threaded neck type / Gewindehalsbefestigung 11.5 Maximum torque 1,5 Nm Anzugsdrehmoment max. 1,5 Nm M 10x1 OFF / AUS 14.7 Ø 5.7 ON / OFF 48.5 +0.5 –0.22 42±0.2 23 7 8 TMx12-211 Label Etikette 6.3 14.5 SW 13 11.5 6.3 42±0.2 TMx12-211N Maximum torque 1,5 Nm Anzugsdrehmoment max. 1,5 Nm M 10x1 OFF / AUS 11.6 14.7 Ø 5.7 ON / OFF 48.5 +0.5 –0.2 23 7 8 8.6 14.5 SW 13 Label Etikette 11.5 TMx12-212 Maximum torque 1,5 Nm Anzugsdrehmoment max. 1,5 Nm M 10x1 OFF / AUS 14.7 Ø 5.7 ON / OFF 48.5 +0.5 –0.2 42±0.2 23 7 8 M 4 Label Etikette 14.5 SW 13 8.1 +0.1 –0.0 with / mit without / ohne Cut-out Montageöffnung Anti-rotation protection / Verdrehschutz CIRCUIT BREAKERS FOR EQUIPMENT GERÄTESCHUTZSCHALTER TM12

www.schurter.com 39 Flange type / Flanschbefestigung TMx12-111SN OFF / AUS 10.7 13.5 ON / OFF 48.5 +0.5 –0.2 42±0.2 Ø 5.7 Ø 11.5 23 7 8 8.6 20.2 2.5 11.5 Label Etikette 6.3 8.6 A 6.3 11.5 Label Etikette 6.3 TMx12-111 OFF / AUS 10.7 13.5 ON / OFF 48.5 +0.5 –0.22 42±0.2 Ø 5.7 Ø 11.5 23 7 8 Ø 4.5 42±0.2 OFF / AUS 10.7 13.5 ON / OFF 48.5 +0.5 –0.2 Ø 5.7 Ø 11.5 M 4 TMx12-112 11.5 Label Etikette 23 7 8 Cut-out Montageöffnung 1313 4.5 30.5 4.5 19.5 Installation from rear / Montage von hinten Installation from front / Montage von vorne Ø 4.5 Ø 4.5 12±0.2 12±0.2 12±0.2 4.5 4.5 7. 0 CIRCUIT BREAKERS FOR EQUIPMENT GERÄTESCHUTZSCHALTER TM12

www.schurter.com40 Schematic diagrams – accessories – colours / Schaltbilder – Zubehör – Farben Schematic diagrams Schaltbilder Black / schwarz Setting display R white Stellungsanzeige R weiss Nickel plated / vernickelt White label / Etikette weiss Black / schwarz Nickel plated / vernickelt Black galvanized / brüniert schwarz Colours Farben 1 7 8 2 Protective transparent cover Degree of protection IP54 Schutzhaube transparent Schutzgrad IP54 TZZ02 Accessories Zubehör 2 3 4511 2 6 6 451 2 3 I>I> Ø 16 CIRCUIT BREAKERS FOR EQUIPMENT GERÄTESCHUTZSCHALTER TM12