TLYH190P TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

TOSHIBA LED Lamp InGaA ℓP Yellow Light Emission TLYH190P Panel Circuit Indicator /Gb7/G2010 mm diameter /Gb7/G20InGaAℓP yellow LED /Gb7/G20All plastic mold type. /Gb7/G20Colorless clear lens /Gb7/G20Low drive current, high intensity yellow light emission Recommended forward current : IF = 1~20 mA (DC) /Gb7/G20All plastic molded lens, provides an excellent on−off contrast ratio. /Gb7/G20Fast response time, capable of pulse operation. /Gb7/G20High power luminous intensity /Gb7/G20Without stand−offs /Gb7/G20Applications: Suitable for outdoor message signboard, safety equipment. Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Forward current (DC) I F 50 mA Reverse voltage V R 4 V Power dissipation P D 125 mW Operating temperature range T opr /G2d30~85 °C Storage temperature range T stg /G2d40~120 °C Unit in mm JEDEC ― EIAJ ― TOSHIBA Weight: 1.0 g

Electrical And Optical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage V F I F = 20mA /Gbe 2.1 2.5 V Reverse current I R V R = 4V /Gbe /Gbe 50 µA TLYH190P 8500 30000 /Gbe Luminous intensity TLYH190P (XY) IV I F = 20mA (Note) 15300 /Gbe 73600 mcd Peak emission wavelength λP I F = 20mA /Gbe 590 /Gbe nm Spectral line half width ∆λ I F = 20mA /Gbe 13 /Gbe nm Dominant wavelength λd I F = 20mA /Gbe 587 /Gbe nm (Note) : Lamps are classified into the following ranks according to their luminous intensity. Measurement tolerance for each limit is ±15%. W: 10000/G2d20000 mcd, X: 18000/G2d36000 mcd, Y: 32000/G2d64000 mcd. Precaution Please be careful of the followings /Gb7/G20Soldering temperature : 260°C max Soldering time : 3s max (Soldering portion of lead: up to 2mm from the body of the device) /Gb7/G20If the lead is formed, the lead should be formed up to 5mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. /Gb7/G20This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light.

I V – Tc Case temperature Tc (°C) Relative luminous intensity I V 0.1 −20 0.3 0.5 0 20 40 60 80 IV – IF Forward current I F (mA) Luminous intensity I V ( m c d ) 100000 500 0.5 50000 10000 5000 3000 1000 1 3 10 30 50 100 Ta = 25°C 30000 Relative Luminous Intensity- Wavelength Wavelength λ (nm) Relative luminous intensity 1.0 540 0.8 0.6 0.4 0.2 560 580 600 620 640 660 IF = 20mA Ta = 25°C I F – Ta Ambient temperature Ta (°C) Allowable forward current I F (mA) 0 20 40 60 80 100 Radiation Pattern Ta = 25°C 0 0.2 0.4 0.6 0.8 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 10° 20° 30° 40° 50° 60° 70° 80° 90° IF – VF Forward voltage V F (V) Forward current I F (mA) 1.6 Ta = 25°C 2.0

/Gb7/G20TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. /Gb7/G20The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. /Gb7/G20Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. /Gb7/G20The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. /Gb7/G20The information contained herein is subject to change without notice. 000707EACRESTRICTIONS ON PRODUCT USE