TLV2217-25PWE4

TLV2217_07 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

/C0084/C0076/C0086/C0050/C0050/C0049/C0055 /C0076/C0079/C0087/C0262/C0068/C0082/C0079/C0080/C0079/C0085/C0084 /C0070/C0073/C0088/C0069/C0068/C0262/C0086/C0079/C0076/C0084/C0065/C0071/C0069 /C0082/C0069/C0071/C0085/C0076/C0065/C0084/C0079/C0082/C0083 /C0261 SLVS067L − MARCH 1992 − REVISED APRIL 2005 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Fixed 1.8-V, 2.5-V, and 3.3-V Outputs /C0068±1% Maximum Output Voltage Tolerance at TJ = 25°C /C0068500-mV Maximum Dropout Voltage at 500 mA (3.3-V Option) /C0068±2% Output Voltage Variation Across Load and Temperature /C0068Internal Overcurrent Limiting /C0068Internal Thermal-Overload Protection /C0068Internal Overvoltage Protection OUTPUT GND INPUT GND INPUT GND OUTPUT PW (TSSOP) PACKAGE (TOP VIEW) HEAT SINK HEAT SINK HEAT SINK HEAT SINK KC (TO-220) PACKAGE (TOP VIEW) HEAT SINK − These terminals have an internal resistive connection to ground and should be grounded or electrically isolated. OUTPUT GND INPUT GND KTP (PowerFLEX /C0069/TO-252*) PACKAGE (TOP VIEW) GND GND OUTPUT KCS (TO-220) PACKAGE (TOP VIEW) INPUT GND *Complies with JEDEC TO-252, variation AC description/ordering information

ORDERING INFORMATION

(NOM) PACKAGE † ORDERABLE PART NUMBER TOP-SIDE MARKING 1.8 V PowerFLEX /TO-252* (KTP) Reel of 3000 TLV2217-18KTPR 2217−18 1.8 V TO-220 (KCS) Tube of 50 TLV2217-18KCS TLV2217−18 TO-220 (KC) Tube of 50 TLV2217-25KC TLV2217−25 2.5 V PowerFLEX /TO-252* (KTP) Reel of 3000 TLV2217-25KTPR 2217−25 0°C to 125°C 2.5 V TSSOP (PW) Tube of 70 TLV2217-25PW 2217−25

0 C to 125C

TSSOP (PW) Reel of 2000 TLV2217-25PWR 2217−25 PowerFLEX /TO-252* (KTP) Reel of 3000 TLV2217-33KTPR 2217−33 3.3 V TO-220 (KC) Tube of 50 TLV2217-33KC TLV2217−333.3 V TSSOP (PW) Reel of 2000 TLV2217-33PWR 2217−33 *Complies to TO-252, variation AC. † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2005, Texas Instruments Incorporated PowerFLEX is a trademark of Texas Instruments. /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0105/C0115 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046

/C0084/C0076/C0086/C0050/C0050/C0049/C0055 /C0076/C0079/C0087/C0262/C0068/C0082/C0079/C0080/C0079/C0085/C0084 /C0070/C0073/C0088/C0069/C0068/C0262/C0086/C0079/C0076/C0084/C0065/C0071/C0069 /C0082/C0069/C0071/C0085/C0076/C0065/C0084/C0079/C0082/C0083 /C0261 /C0261 SLVS067L − MARCH 1992 − REVISED APRIL 2005

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

description/ordering information (continued) The TLV2217 family of low-dropout regulators offers a variety of fixed-voltage options that offer a maximum continuous input voltage of 16 V, making them more versatile than CMOS regulators. Utilizing a pnp pass element, these regulators are capable of sourcing 500 mA of current, with a specified maximum dropout of 500 mV (3.3-V and 2.5-V options), making these regulators ideal for low-voltage applications. Additionally, the TLV2217 regulators offer very tight output accuracy of ±2% across operating load and temperature ranges. Other convenient features the regulators provide are internal overcurrent limiting, thermal-overload protection, and overvoltage protection. The TLV2217 family of regulators is available in fixed voltages of 1.8 V, 2.5 V, and 3.3 V. absolute maximum ratings over operating virtual junction temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. package thermal data (see Note 1) PACKAGE BOARD θJP‡ θJC θJA PowerFLEX /TO-252 (KTP) High K, JESD 51-5 1.4°C/W 19°C/W 28°C/W TO-220 (KC/KCS) High K, JESD 51-5 3°C/W 17°C/W 19°C/W TSSOP (PW) High K, JESD 51-7 32°C/W 83°C/W ‡ For packages with exposed thermal pads, such as QFN, PowerPAD, and PowerFLEX, θJP is defined as the thermal resistance between the die junction and the bottom of the exposed pad. NOTE 1: Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. recommended operating conditions MIN MAX UNIT VI Input voltage 3.0 12 V IO Output current 0 500 mA TJ Operating virtual junction temperature range 0 125 °C § Minimum VI is equal to 3.0 V or VO (max) + 0.6 V, whichever is greater.

/C0084/C0076/C0086/C0050/C0050/C0049/C0055 /C0076/C0079/C0087/C0262/C0068/C0082/C0079/C0080/C0079/C0085/C0084 /C0070/C0073/C0088/C0069/C0068/C0262/C0086/C0079/C0076/C0084/C0065/C0071/C0069 /C0082/C0069/C0071/C0085/C0076/C0065/C0084/C0079/C0082/C0083 /C0261 SLVS067L − MARCH 1992 − REVISED APRIL 2005 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics at VI = 4.5 V, IO = 500 mA, TJ = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS † TLV2217-33 UNITPARAMETER TEST CONDITIONS † MIN TYP MAX UNIT Output voltage IO = 20 mA to 500 mA, VI = 3.8 V to 5.5 V TJ = 25°C 3.267 3.30 3.333 VOutput voltage IO = 20 mA to 500 mA, VI = 3.8 V to 5.5 V TJ = 0°C to 125°C 3.234 3.366 V Input voltage regulationVI = 3.8 V to 5.5 V 5 15 mV Ripple rejection f = 120 Hz, Vripple = 1 VPP VI = 4.5 V −62 dB Output voltage regulationIO = 20 mA to 500 mA 5 30 mV Output noise voltage f = 10 Hz to 100 kHz 500 µV Dropout voltage IO = 250 mA 400 mVDropout voltage IO = 500 mA 500 mV Bias current IO = 0 2 5 mABias current IO = 500 mA 19 49 mA † Pulse-testing techniques are used to maintain the virtual junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 22-µF tantalum capacitor, with equivalent series resistance of 1.5 Ω, on the output. electrical characteristics at VI = 3.3 V, IO = 500 mA, TJ = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS † TLV2217-25 UNITPARAMETER TEST CONDITIONS † MIN TYP MAX UNIT Output voltage IO = 20 mA to 500 mA, VI = 3.0 V to 5.5 V TJ = 25°C 2.475 2.5 2.525 VOutput voltage IO = 20 mA to 500 mA, VI = 3.0 V to 5.5 V TJ = 0°C to 125°C 2.45 2.55 V Input voltage regulationVI = 3.0 V to 5.5 V 4 12 mV Ripple rejection f = 120 Hz, Vripple = 1 VPP, VI = 4.5 V −62 dB Output voltage regulationIO = 20 mA to 500 mA 4 23 mV Output noise voltage f = 10 Hz to 100 kHz 500 µV Dropout voltage IO = 250 mA 400 mVDropout voltage IO = 500 mA 500 mV Bias current IO = 0 2 5 mABias current IO = 500 mA 19 49 mA † Pulse-testing techniques are used to maintain the virtual junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 22-µF tantalum capacitor, with equivalent series resistance of 1.5 Ω, on the output.

/C0084/C0076/C0086/C0050/C0050/C0049/C0055 /C0076/C0079/C0087/C0262/C0068/C0082/C0079/C0080/C0079/C0085/C0084 /C0070/C0073/C0088/C0069/C0068/C0262/C0086/C0079/C0076/C0084/C0065/C0071/C0069 /C0082/C0069/C0071/C0085/C0076/C0065/C0084/C0079/C0082/C0083 /C0261 /C0261 SLVS067L − MARCH 1992 − REVISED APRIL 2005

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

electrical characteristics at VI = 3.3 V, IO = 500 mA, TJ = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS † TLV2217-18 UNITPARAMETER TEST CONDITIONS † MIN TYP MAX UNIT Output voltage IO = 20 mA to 500 mA, VI = 3.0 V to 5.5 V TJ = 25°C 1.782 1.8 1.818 VOutput voltage IO = 20 mA to 500 mA, VI = 3.0 V to 5.5 V TJ = 0°C to 125°C 1.764 1.836 V Input voltage regulationVI = 3.0 V to 5.5 V 3 9 mV Ripple rejection f = 120 Hz, Vripple = 1 VPP, VI = 4.5 V −62 dB Output voltage regulationIO = 20 mA to 500 mA 3 17 mV Output noise voltage f = 10 Hz to 100 kHz 500 µV Dropout voltage IO = 250 mA ‡ mVDropout voltage IO = 500 mA ‡ mV Bias current IO = 0 2 5 mABias current IO = 500 mA 19 49 mA † Pulse-testing techniques are used to maintain the virtual junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 22-µF tantalum capacitor, with equivalent series resistance of 1.5 Ω, on the output. ‡ Dropout voltage is limited by the input voltage range, with minimum VI = 3.0 V.

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TLV2217-18KCS ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-18KCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-18KTPR NRND PFM KTP 2 3000 TBD CU SN Level-1-220C-UNLIM TLV2217-18KTPRG3 OBSOLETE PFM KTP 2 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TLV2217-18KVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TLV2217-25KC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-25KCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-25KCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-25KTPR NRND PFM KTP 2 3000 TBD CU SN Level-1-220C-UNLIM TLV2217-25KTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TLV2217-25KVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TLV2217-25PW ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPD Level-1-260C-UNLIM TLV2217-25PWE4 ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPD Level-1-260C-UNLIM TLV2217-25PWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPD Level-1-260C-UNLIM TLV2217-25PWRE4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPD Level-1-260C-UNLIM TLV2217-33KC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-33KCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-33KCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TLV2217-33KTPR NRND PFM KTP 2 3000 TBD CU SN Level-1-220C-UNLIM TLV2217-33KTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TLV2217-33KVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TLV2217-33PWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPD Level-1-260C-UNLIM TLV2217-33PWRE4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPD Level-1-260C-UNLIM TLV2217-33PWRG4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPD Level-1-260C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in PACKAGE OPTION ADDENDUM www.ti.com 19-Dec-2006 Addendum-Page 1

a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 19-Dec-2006 Addendum-Page 2

MPSF001F – JANUARY 1996 – REVISED JANUARY 2002 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 KTP (R-PSFM-G2) PowerFLEX  PLASTIC FLANGE-MOUNT PACKAGE 0.228 (5,79) 0.218 (5,54) 0.233 (5,91) 0.243 (6,17) 0.001 (0,02) 0.005 (0,13) 0.070 (1,78) Seating Plane 0.080 (2,03) 0.010 (0,25) NOM Gage Plane 0.010 (0,25) 4073388/M 01/02 0.037 (0,94) 0.047 (1,19) 0.247 (6,27) 0.237 (6,02) NOM 0.215 (5,46) 0.371 (9,42) 0.381 (9,68) 0.090 (2,29) 0.100 (2,54) 0.287 (7,29) 0.031 (0,79) 0.032 (0,81) MAX 0.277 (7,03) 0.025 (0,63) 0.130 (3,30) NOM 0.090 (2,29) 0.004 (0,10) 2°–/C02576° 0.040 (1,02) 0.050 (1,27) Thermal Tab (See Note C) 0.010 (0,25) NOM NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. The center lead is in electrical contact with the thermal tab. D. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15). E. Falls within JEDEC TO-252 variation AC. PowerFLEX is a trademark of Texas Instruments.

MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

14 PINS SHOWN

0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2007, Texas Instruments Incorporated