TLRP2B10CR008JTE

TLRP TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

SMD Low Ohmic – Current Sense Resistors 1773449-4 Rev. B 05/2021 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Key Features Up to 3 Watt at 70°C 12:06, 20:10, and 25:12 Packages Available Low Inductance <5nH AEC-Q200 Qualified Sulfur Resistant - unaffected by sulfur environments Type TLRP Series TE Connectivity (TE) is pleased to offer these unique AEC-Q200 qualified High Power Metal Strip Resistors for Current Sensing positions. TLRP resistors have a special metal resistive element combined with suitable barrier layers beneath the solder to prolong terminal life. This model is particularly useful for power management along with DC-DC converting and charging applications, as well as adaptors within SWPS applications. Characteristics – Electrical Size Power Rating @ 70°C Resistance Range (mΩ) TCR (PPM/°C) ±0.5% ±1% ±5% 1206 1W 8, 10, 12, 15, 20, 25, 30, 33, 40 ±50 33, 40 ±75 ±100 2010 1W 10, 15, 20, 30, 50, 68, 75, 100 ±75 2W 10, 15, 20, 30, 50 2512 2W & 3W 90, 91, 100, 120, 150, 180, 200 ±25 68, 70, 75, 80, 82, 90, 91, 100, 120, 150, 180, 200 ±50 ±75 Operating Temperature Range: -55 ~ 170°C Operating Current = √(P/R), Operating Voltage = √(P*R) Derating

SMD Low Ohmic – Current Sense Resistors 1773449-4 Rev. B 05/2021 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Construction and Dimensions Type Size L mm W mm T mm D mm Marking Resistance (4 Digit) Resistance 3mΩ 10mΩ 22mΩ 100mΩ Codes R003 R010 R022 R100 Solder Profile (Reflow)

SMD Low Ohmic – Current Sense Resistors 1773449-4 Rev. B 05/2021 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Environmental Characteristics Item Requirement Test Method Temperature Coefficient of Resistance (T.C.R.) As Spec. IEC60115-1 4.8 JIS-C-5201-1 4.8 +25°C ~125°C, 25°C is the reference temperature Short Time Overload ±1.0% IEC60115-1 4.13 JIS-C-5201-1 4.13 5*rated power for 5 seconds Insulation Resistance ≥ϭϬG IEC60115-1 4.6 JIS-C-5201-1 4.13 100V DC for 1 minute Endurance ±1.0% IEC60115-1 4.25 70±2°C, rated power for 1000 hrs ǁith ϭ.ϱ hrs ͞ON͟ aŶd Ϭ.ϱ hr ͞OFF͟ MIL-STD-202 Method 108 Condition D Steady State TA=125°C at derated power. Measurement at 24±4 hours after test conclusion. Biased Humidity ±1.0% MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power Dry Heat ±1.0% IEC60115-1 4.23.2 MIL-STD-202 Method 108 at +170°C for 1000 hrs Resistance to Solvents No visible damage on appearance and marking. MIL-STD-202 Method 215 Note: Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. Mechanical Shock ±1.0% MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak ǀalue is ϭϬϬg’s. Norŵal duration(D) is 6. Vibration ±1.0% MIL-STD-202 Method 204 5g's for 20 min., 12 cycles each of 3 orientations. Note: Use 8"X5" PCB .031" thick 7 secure points on one long side and 2 secure points at corners of opposite sides. Parts mounted within 2" from any secure point. Test from 10-2000 Hz. ESD ±1.0% AEC-Q200-002 Human body model, 2KV. (DC = Direct Contact Discharge) Flammability V-0 UL-94 50W (20 mm) Vertical Burning Test. Electrical test not required.

SMD Low Ohmic – Current Sense Resistors 1773449-4 Rev. B 05/2021 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Item Requirement Test Method Flame Retardance The following phenomena cannot occur during the experiment: (1)A flame over 3.0 seconds duration. (2)An explosion. (3)A temperature above 350°C sustained for over 10 seconds AEC-Q200-001 Assemble the sample on the test board, perform functional test before flame retardant test to ensure no damage to the sample. The test environment is 22±5 ℃ still air, from 9.0 to 32.0 VDC (current clamped up to 500A), increase the voltages at the rate of

1.0 VDC per hour until the end of

the experiment. Bending Strength ±1.0% JIS-C-5201-1 4.33 IEC-60115-1 4.33 AEC-Q200-005 Bending width 2mm once for 5 seconds Terminal Strength (SMD) Not broken AEC-Q200-006 Force of 1.8kg for 60 seconds. Solderability 95% min. coverage JIS-C-5201-1 4.17 IEC-60115-1 4.17 J-STD-002 245±5°C for 3seconds Resistance to Soldering Heat IEC-60115-1 4.18 MIL-STD-202 Method 210 260±5°C for 10 seconds Rapid Change of Temperature IEC-60115-1 4.19 -55°C to +155°C, 5 cycles Temperature Cycling ±1.0% JESD22 Method JA-104 1000 cycles (-55℃ to +125℃, Dwell 30 minutes, transition time within 1 minute). Measurement at 24±4 hours after test conclusion. Low Temperature Storage ±1.0% IEC60115-1 4.23.4 at -55°C for 2hrs RCWV (Rated Continuous Working Voltage)= √;P*RͿor Max. OperatiŶg Voltage whichever is lower. Storage Temperature: 15~28°C; Humidity < 80%RH

SMD Low Ohmic – Current Sense Resistors 1773449-4 Rev. B 05/2021 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Recommended Land Pattern Size A (mm) B (mm) C (mm) 1206 1.50 1.40 1.70 2010 3.60 1.40 2.50±0.2 2512 4.00 2.00 3.50 *FR4 copper board, 100µm of copperpad thickness Packaging Reel Specifications & Packaging Quantity Size Resistance ;ŵΩ Tape / Qty Tape width Reel Dia. ØA (mm) ±1.5 ØB (mm) ØC (mm W (mm) T (mm 1206 3~40 Paper / 5K 8mm inch 178.5 ϲϬЀ¹Ё⁰ 13.0 ±0.2 9.0±0.5 12.5 ±0.5 2010 10~100 Embossed / 4K 12mm ϲϬЀ¹Ё⁰ 13.0 ±0.5 13.0 ±0.5 15.5 ±0.5 2512 4~200 Embossed / 4K 12mm 60±1.0 13.0 ±0.5 13.0±1. 15.5 ±0.5 2512 3 Embossed / 2K 12mm

SMD Low Ohmic – Current Sense Resistors 1773449-4 Rev. B 05/2021 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Paper Tape Specification A (mm) B (mm) W (mm) E (mm) F (mm) PЅ (mm) PІ (mm) PЇ (mm) ØDЅ (mm) T (mm) 1.90± 0.10 3.50± 0.20 8.0± 0.20 1.75± 0.10 3.50± 0.05 4.00± 0.10 4.00± 0.05 2.00± 0.05 1.50 +0.1,-0 0.85± 0.10 Embossed Plastic Tape Specification A (mm) B (mm) W (mm) E (mm) F (mm) PЅ (mm) PІ (mm) PЇ (mm) ØDЅ (mm) T (mm) 2010 2.80 ±0.10 5.5 ±0.10 12.0 ±0.30 0.75 ±0.10 5.5 ±0.5 4.00 ±0.10 4.00 ±0.10 2.00 ±0.05 1.5 +0.1 -0 1.20+0 2512 3.50± 0.10 6.70± 0.10 12.0± 0.30 1.75± 0.10 5.5± 0.05 4.00± 0.10 4.00± 0.10 2.00± 0.05 1.50 +0.1 1.20+0 2512 3mΩ 1.45± 0.2 How To Order TLRP 2B 10 E R008 F TD Common Part Size *Power Rating **TCR (PPM/°C) Resistance Code Tolerance Packaging TLRP – Ultra Low Ohm Metal Strip Resistor 2B – 1206 2H - 2010 3A – 2512 1.0 = 10 2.0 = 20 3.0 = 30 C = ±25 D = ±50 W = ±75 E = ±100 R003 - 3mΩ R020 - ϮϬŵΩ R10 – Ϭ.ϭΩ ;ϭϬϬŵΩͿ D = ±0.5% F = ±1% J = ±5% TDG = 2000/Reel (2512 3mΩ) TE = 4000/Reel (2512) TD = 5000/Reel (1206)