TLP268J TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Photocouplers GaAs Infrared LED & Photo Triac TLP268JTLP268JTLP268JTLP268J Start of commercial production 2013-10 1. 1. 1. 1. ApplicationsApplicationsApplicationsApplications

  • Triac Drivers
  • Programmable Logic Controllers (PLCs)
  • AC-Output Modules
  • Solid-State Relays 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP268J consists of a zero crossing photo triac, optically coupled to a gallium arsenide infrared emitting diode. The TLP268J is housed in the SO6 package and guarantees a creepage distance of 5.0 mm (min), a clearance of 5.0 mm (min) and insulation thickness of 0.4 mm (min). Therefore, the TLP268J meets the reinforced insulation class requirements of international safety standards. 3. 3. 3. 3. FeaturesFeaturesFeaturesFeatures (1) Peak off-state voltage: 600 V (min) (2) Zero crossing functionary (ZC) (3) Trigger LED current: 3 mA (max) (4) On-state current: 70 mA (max) (5) Isolation voltage: 3750 Vrms (min) (6) Safety standards UL approved: UL1577 File No.E67349 cUL approved: CSA Component Acceptance Service No.5A, File No.E67349 VDE approved: Option (V4) EN60747-5-5 (Note)(Note)(Note)(Note) Maximum operating insulation voltage: 707 Vpeak Highest permissible overvoltage: 6000 Vpeak Note: When an EN60747-5-5 approved type is needed, please designate the Option (V4)Option (V4)Option (V4)Option (V4). Table Table Table Table Trigger LED Current (Note) (Unless otherwise specified, TTrigger LED Current (Note) (Unless otherwise specified, TTrigger LED Current (Note) (Unless otherwise specified, TTrigger LED Current (Note) (Unless otherwise specified, Taaaa = 25 = 25 = 25 = 25  )))) Rank None (IFT2) IFT Rank Marking Test Condition VT = 3 V VT = 3 V Trigger LED Current IFT (min) Trigger LED Current IFT (max) Unit mA Note: Specify both the part number and a rank in this format when ordering. Example: TLP268J (IFT2) For safety standard certification, however, specify the part number alone. Example: TLP268J 2015-03-13 Rev.5.0
  1. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 11-4M1S 1: Anode 3: Cathode 4: Triac Terminal 6: Triac Terminal 5. 5. 5. 5. Mechanical ParametersMechanical ParametersMechanical ParametersMechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation thickness 2.54-mm pitch 5.0 (min) 5.0 (min) 0.4 (min) Unit mm 6. 6. 6. 6. Product Naming ConventionsProduct Naming ConventionsProduct Naming ConventionsProduct Naming Conventions Type of package used for shipment is denoted by a symbol suffix after a part number. The method of classification is as below. Example: TLP268J(TPL,E(T Part number: TLP268J Tape type: TPL (Note 1)(Note 1)(Note 1)(Note 1) [[G]]/RoHS COMPATIBLE: E (Note 2)(Note 2)(Note 2)(Note 2) Domestic ID (Country/Region of origin: Thailand): (T Note 1: At the part of tape type, below options are used. TPL, TPR Note 2: Please contact your Toshiba sales representative for details on environmental information such as the product's RoHS compatibility. RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronics equipment. 2015-03-13 Rev.5.0
  1. 7. 7. 7. Absolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, Taaaa = 25 = 25 = 25 = 25  )))) LED Detector Common Characteristics Input forward current Input forward current derating Input forward current (pulsed) Input reverse voltage Junction temperature Input power dissipation Off-state output terminal voltage R.M.S. on-state current R.M.S. on-state current R.M.S. on-state current derating ON-state current (pulsed) Peak non-repetitive surge current Junction temperature Output power dissipation Operating temperature Storage temperature Lead soldering temperature Isolation voltage (Ta ≥ 53  ) (Ta = 25  ) (Ta = 70  ) (Ta ≥ 25  ) (10 s) Symbol IF ∆IF/∆Ta IFP VR Tj PD VDRM IT(RMS) IT(RMS) ∆IT(RMS)/∆Ta IONP ITSM Tj PO Topr Tstg Tsol BVS Note (Note 1) (Note 2) (Note 3) (Note 4) Rating -0.3 125 600 -0.67 1.2 125 200 -40 to 100 -55 to 125 260 3750 Unit mA mA/ A V mW V mA mA/ A A mW Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width (PW) ≤ 100 µs, 100 pps Note 2: Pulse width (PW) ≤ 100 µs, 120 pps Note 3: Pulse width (PW) ≤ 10 ms Note 4: This device is considered as a two-terminal device: Pins 1 and 3 are shorted together, and pins 4 and 6 are shorted together. 8. 8. 8. 8. Recommended Operating Conditions (Note)Recommended Operating Conditions (Note)Recommended Operating Conditions (Note)Recommended Operating Conditions (Note) Characteristics AC mains voltage Input forward current ON-state current (pulsed) Operating temperature Symbol VAC IF IONP Topr Note Min 4.5 -25 Typ. Max 240 7.5 Unit V mA A Note: The recommended operating conditions are given as a design guide necessary to obtain the intended performance of the device. Each parameter is an independent value. When creating a system design using this device, the electrical characteristics specified in this datasheet should also be considered. 2015-03-13 Rev.5.0
  1. 9. 9. 9. Electrical Characteristics (Unless otherwise specified, TElectrical Characteristics (Unless otherwise specified, TElectrical Characteristics (Unless otherwise specified, TElectrical Characteristics (Unless otherwise specified, Taaaa = 25 = 25 = 25 = 25  )))) LED Detector Characteristics Input forward voltage Input reverse current Input capacitance Peak off-state current Peak on-state voltage Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage (dv/dt) Symbol VF IR Ct IDRM VTM IH dv/dt dv/dt(c) Note Test Condition IF = 10 mA VR = 5 V V = 0 V, f = 1 MHz VDRM = 600 V ITM = 70 mA Vin = 240 V, Ta = 85  See Fig. 9.1. Vin = 60 Vrms, IT = 15 mA See Fig. 9.1. Min 1.0 200 Typ. 1.27 1.7 0.2 500 0.2 Max 1.4 1000 2.8 Unit V µA pF nA V mA V/µs 10. 10. 10. 10. Coupled Electrical Characteristics (Unless otherwise specified, TCoupled Electrical Characteristics (Unless otherwise specified, TCoupled Electrical Characteristics (Unless otherwise specified, TCoupled Electrical Characteristics (Unless otherwise specified, Taaaa = 25 = 25 = 25 = 25  )))) Characteristics Trigger LED current Inhibit voltage Inhibit current Turn-on time Symbol IFT VIH IIH ton Note Test Condition VT = 3 V IF = Rated IFT IF = Rated IFT VT = Rated VDRM VD = 6 → 4 V, RL = 100 Ω, IF = Rated IFT × 1.5 Min Typ. 200 Max 600 100 Unit mA V µA µs 11. 11. 11. 11. Isolation Characteristics (Unless otherwise specified, TIsolation Characteristics (Unless otherwise specified, TIsolation Characteristics (Unless otherwise specified, TIsolation Characteristics (Unless otherwise specified, Taaaa = 25 = 25 = 25 = 25  )))) Characteristics Total capacitance (input to output) Isolation resistance Isolation voltage Symbol CS RS BVS Note (Note 1) (Note 1) (Note 1) Test Condition VS = 0 V, f = 1 MHz AC, 60 s AC, 1 s in oil DC, 60 s in oil Min 1 × 1012 3750 Typ. 0.8 1014 10000 10000 Max Unit pF Ω Vrms Vdc Note 1: This device is considered as a two-terminal device: Pins 1 and 3 are shorted together, and pins 4 and 6 are shorted together. 2015-03-13 Rev.5.0
  1. 12. 12. 12. Characteristics Curves (Note)Characteristics Curves (Note)Characteristics Curves (Note)Characteristics Curves (Note) 2015-03-13 Rev.5.0

Note: The above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. 2015-03-13 Rev.5.0

  1. 13. 13. 13. Soldering and StorageSoldering and StorageSoldering and StorageSoldering and Storage The soldering temperature should be controlled as closely as possible to the conditions shown below, irrespective of whether a soldering iron or a reflow soldering method is used.
  • When using soldering reflow. The soldering temperature profile is based on the package surface temperature. (See the figure shown below, which is based on the package surface temperature.) Reflow soldering must be performed once or twice. The mounting should be completed with the interval from the first to the last mountings being 2 weeks.
  • When using soldering flow Apply preheating of 150  (package surface temperature) for 60 to 120 seconds. Mounting condition of 260  within 10 seconds is recommended. Flow soldering must be performed once.
  • When using soldering Iron Complete soldering within 10 seconds for lead temperature not exceeding 260  or within 3 seconds not exceeding 350  . Heating by soldering iron must be done only once per lead.
  • Avoid storage locations where devices may be exposed to moisture or direct sunlight.
  • Follow the precautions printed on the packing label of the device for transportation and storage.
  • Keep the storage location temperature and humidity within a range of 5  to 35  and 45% to 75%, respectively.
  • Do not store the products in locations with poisonous gases (especially corrosive gases) or in dusty conditions.
  • Store the products in locations with minimal temperature fluctuations. Rapid temperature changes during storage can cause condensation, resulting in lead oxidation or corrosion, which will deteriorate the solderability of the leads.
  • When restoring devices after removal from their packing, use anti-static containers.
  • Do not allow loads to be applied directly to devices while they are in storage.
  • If devices have been stored for more than two years under normal storage conditions, it is recommended that you check the leads for ease of soldering prior to use. 2015-03-13 Rev.5.0
  1. 14. 14. 14. Land Pattern Dimensions (for reference only)Land Pattern Dimensions (for reference only)Land Pattern Dimensions (for reference only)Land Pattern Dimensions (for reference only) (Unit: mm)(Unit: mm)(Unit: mm)(Unit: mm) 15. 15. 15. 15. Marking (Note)Marking (Note)Marking (Note)Marking (Note) Note: A different marking is used for photocouplers that have been qualified according to option (V4) of EN60747. See Fig. 16.4. 2015-03-13 Rev.5.0
  1. 16. 16. 16. EN60747-5-5 Option (V4) SpecificationEN60747-5-5 Option (V4) SpecificationEN60747-5-5 Option (V4) SpecificationEN60747-5-5 Option (V4) Specification
  • Part number: TLP268J (Note)(Note)(Note)(Note)
  • The following part naming conventions are used for the devices that have been qualified according to option (V4) of EN60747. Example: TLP268J(V4-TPL,E(T V4: EN60747 option TPL: Tape type E: [[G]]/RoHS COMPATIBLE (Note 1)(Note 1)(Note 1)(Note 1) Note: Use TOSHIBA standard type number for safety standard application. e.g., TLP268J(V4-TPL,E(T → TLP268J Note 1: Please contact your Toshiba sales representative for details on environmental information such as the product's RoHS compatibility. RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronics equipment. 2015-03-13 Rev.5.0

Note: If a printed circuit is incorporated, the creepage distance and clearance may be reduced below this value. (e. g., at a standard distance between soldering eye centers of 3.5 mm). If this is not permissible, the user shall take suitable measures. Note: This photocoupler is suitable for safe electrical isolationsafe electrical isolationsafe electrical isolationsafe electrical isolation only within the safety limit data. Maintenance of the safety data shall be ensured by means of protective circuits. for EN60747for EN60747for EN60747for EN60747 Note: The above marking is applied to the photocouplers that have been qualified according to option (V4) of EN60747. 2015-03-13 Rev.5.0

Rev.5.0

Package DimensionsPackage DimensionsPackage DimensionsPackage Dimensions Unit: mm Weight: 0.08 g (typ.) Package Name(s) TOSHIBA: 11-4M1S 2015-03-13 Rev.5.0

RESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USE

  • Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice.
  • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
  • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
  • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIREPRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIREPRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIREPRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAYEXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAYEXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAYEXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACTCAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACTCAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACTCAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE").("UNINTENDED USE").("UNINTENDED USE").("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FORIF YOU USE PRODUCT FORIF YOU USE PRODUCT FORIF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.
  • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
  • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
  • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
  • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
  • GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
  • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
  • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 2015-03-13 Rev.5.0