TLP227G_07 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

TLP227G,TLP227G−2 2007-10-01 1 TOSHIBA Photocoupler Photo Relay TLP227G,TLP227G−2 Cordless Telephone PBX Modem The TOSHIBA TLP227G series consist of a gallium arsenide infrared emitting diode optically coupled to a photo−MOS FET in a plastic DIP package. The TLP227G series are a bi−directional switch which can replace mechanical relays in many applications.

  • TLP227G: 4 pin DIP(DIP4),1 channel type(1 form A)
  • TLP227G−2: 8 pin DIP(DIP8),2 channel type(2 form A)
  • Peak off−state voltage: 350V(min.)
  • Trigger LED current: 3mA(max.)
  • On−state current: 120mA(max.)
  • On−state resistance: 35Ω(max.)
  • Isolation voltage: 2500Vrms (min.)
  • Isolation thickness: 0.4mm(min.)
  • BSI approved: BS EN60065: 2002, certificate no.8275 BS EN60950-1: 2002, certificate no.8276
  • Option(D4) type TUV approved: DIN EN 60747-5-2, certificate no. 40011913 Pin Configuration (top view) 1: Anode 2: Cathode 3: Drain 1 4: Drain 2 TLP227G 1 1 1, 3: Anode 2, 4: Cathode 5: Drain 1 6: Drain 2 7: Drain 3 8: Drain 4 TLP227G-2 Unit in mm TOSHIBA 11 −5B2 Weight: 0.26g 4 3

1 Form A

TOSHIBA 11 −10C4 Weight: 0.54g

2 Form A

TLP227G,TLP227G−2 2007-10-01 2 Internal Circuit Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Forward current IF 50 mA Forward current derating(Ta ≥ 25°C) ΔIF / °C −0.5 mA / °C Peak forward current(100μs pulse, 100pps) I FP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C LED Off-state output terminal voltage VOFF 350 V TLP227G 120 One channel 120 On-state current TLP227G−2 Both channel (Note 1) ION 100 mA TLP227G −1.2 One channel −1.2 On-state current derating(Ta ≥ 25°C) TLP227G−2 Both channel (Note 1) ΔION / °C −1.0 mA / °C Detector Junction temperature Tj 125 °C Storage temperature range Tstg −55~125 °C Operating temperature range Topr −40~85 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC,1 min., R.H.≤ 60%) (Note 2) BV S 2500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1): Two channels operating simultaneously. (Note 2): Device considered a two-terminal device: LED side pins shorted together, and detector side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VDD ― ― 280 V Forward current IF 5 7.5 25 mA On-state current ION ― ― 100 mA Operating temperature Topr −20 ― 65 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. (TLP227G)

TLP227G,TLP227G−2 2007-10-01 3 Individual Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF I F=10mA 1.0 1.15 1.3 V Reverse current IR V R=5V ― ― 10 μA LED Capacitance C T V=0,f=1MHz ― 30 ― pF Off−state current IOFF V OFF=350V ― — 1 μA Detector Capacitance C OFF V=0,f=1MHz ― 40 ― pF Coupled Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min. Typ. Max. Unit Trigger LED current IFT I ON=120mA ― 2 3 mA ION=120mA,IF=5mA ― 22 35 On−state resistance RON ION=20~120mA, IF=5mA ― 26 40 Ω Isolation Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min. Typ. Max. Unit Capacitance input to output CS VS=0,=1MHz ― 0.8 ― pF Isolation resistance RS VS=500V,R.H.≤ 60% 5×10 ― Ω AC,1 minute 2500 ― ― AC,1 second(in oil) ― 5000 ― Vrms Isolation voltage BVS DC,1 minute(in oil) ― 5000 ― V dc Switching Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min. Typ. Max. Unit Turn−on time tON ― 0.3 1 Turn−off time tOFF RL=200Ω VDD=20V,IF=5mA ― 0.1 1 ms Switching Time Test Circuit tOFF tON 10% 90% VOUT IF 1 VDD VOUT RL IF 4 TLP227G

TLP227G,TLP227G−2 2007-10-01 4 IF – Ta Ambient temperature Ta (°C) Allowable forward current IF (mA) 100 －20 0 20 40 60 80 100 120 IFP – DR Duty cycle ratio D R Allowable pulse forward current I FP (mA) 5000 500 300 100 10－3 3 3 3 10－2 10－1 3000 1000 Pulse width ≤ 100μs Ta = 25°C IF –VF Forward voltage V F ( V ) Forward current I F ( m A ) 100 0.1 0.3 0.5 Ta = 25°C ΔVF / ΔTa – IF Forward current I F ( m A ) Forward voltage temperature coefficient Δ VF / ΔTa (mV / °C) －0.4 0.1 0.3 1 3 5 10 50 －2.4 －1.6 －1.2 0.5 －0.8 －2.0 －2.8 IFP – VFP Pulse forward voltage V FP (V) Pulse forward current I FP (mA) 1000 300 1.8 500 100 Pulse width ≤ 10μs Repetitive frequency = 100Hz Ta = 25°C －20 0 20 40 60 80 100 ION – Ta Ambient temperature Ta (°C) On-state current I ON ( m A ) 140 100 120

TLP227G,TLP227G−2 2007-10-01 5 IOFF – Ta Ambient temperature Ta (°C) Off-state current I OFF ( n A ) 1000 －20 300 100 0 20 40 60 80 100 500 VOFF = 350V IFT – Ta Relative trigger LED current IFT / IFT (Ta = 25°C) Ambient temperature Ta (°C) 3.0 2.5 2.0 1.0 0.5 －20 0 20 40 60 100 80 ION = Rated 1.5 ION – VON On-state voltage V ON (V) On-state current I ON ( m A ) 200 －200－4 100 －100 －2 0 2 4 Ta = 25°C IF = 5mA Ambient temperature Ta (°C) －20 0 20 40 60 100 80 RON – Ta On-state resistance R ON ( Ω) ION = Rated IF = 5mA

TLP227G,TLP227G−2 2007-10-01 6 RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • GaAs(Gallium Arsenide) is used in this product. The dus t or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.