TLP160J_07 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

TOSHIBA Photocoupler GaAs Ired & Photo− Triac TLP160J Triac Drive Programmable Controllers AC−Output Module Solid State Relay The TOSHIBA mini flat coupler TLP160J is a small outline coupler, suitable for surface mount assembly. The TLP160J consists of a photo triac, optically coupled to a gallium arsenide infrared emitting diode.

  • Peak off −state voltage: 600 V (min.)
  • Trigger LED current: 10 mA (max.)
  • On−state current: 70 mA (max.)
  • Isolation voltage: 2500 Vrms (min.)
  • UL recognized: UL1577, file No. E67349 Trigger LED Current Trigger LED Current (mA) VT=6V, Ta=25°C Classi− fication* Min. Max. Marking Of Classification (IFT7) ― 7 T7 Standard ― 10 T7, blank *Ex. (IFT7); TLP160J (IFT7) (Note) Application type name for certification test, please use standard product type name, i.e. TLP160J (IFT7): TLP160J Pin Configurations 1. Anode 3. Cathode 4. Terminal 1 6. Terminal 2 Unit in mm TOSHIBA 11 −4C3 Weight: 0.09 g

Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Forward current IF 50 mA Forward current derating (Ta ≥ 53°C) ΔIF / °C −0.7 mA / °C Peak forward current (100 μs pulse, 100 pps) I FP 1 A Reverse voltage VR 5 V LED Junction temperature Tj 125 °C Off−state output terminal voltage VDRM 600 V Ta=25°C 70 On−state RMS current Ta=70°C IT(RMS) mA On−state current derating (Ta ≥ 25°C) ΔIT / °C −0.67 mA / °C Peak on−state current (100μs pluse, 120pps) I TP 2 A Peak nonrepetitive surge current (PW=10ms, DC=10%) ITSM 1.2 A Detector Junction temperature Tj 115 °C Storage temperature range Tstg −55~125 °C Operating temperature range Topr −40~100 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC, 1 min., R.H. ≤ 60%) (Note) BV S 2500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VAC ― ― 240 Vac Forward current IF 15 20 25 mA Peak on−state current ITP ― ― 1 A Operating temperature Topr −25 ― 85 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document.

Individual Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF I F = 10 mA 1.0 1.15 1.3 V Reverse current IR V R = 5 V ― ― 10 μA LED Capacitance C T V = 0, f = 1 MHz ― 30 ― pF Peak off−state current IDRM V DRM = 600 V ― 10 1000 nA Peak on−state voltage VTM I TM = 70 mA ― 1.7 2.8 V Holding current IH ― ― 1.0 ― mA Critical rate of rise of off−state voltage dv / dt V in = 240 Vrms, Ta = 85°C (Fig.1) ― 500 ― V / μs Detector Critical rate of rise of commutating voltage dv / dt(c) I T = 15 mA, Vin = 60 Vrms (Fig.1) ― 0.2 ― V / μs Coupled Electrical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min. Typ. Max. Unit Trigger LED current IFT V T = 6 V ― 5 10 mA Capacitance input to output CS V S = 0, f = 1 MHz ― 0.8 ― pF Isolation resistance RS V S = 500 V, R.H. ≤ 60% 1×10 ― Ω AC, 1 minute 2500 ― ― AC, 1 second, in oil ― 5000 ― Vrms Isolation voltage BVS DC, 1 minute, in oil ― 5000 ― Vdc Turn−on time tON VD = 6→4V, RL = 100Ω IF = rated IFT × 1.5 ― 30 100 μs Fig.1 dv / dt test circuit 1 6 3 4 5V，VCC Vin RL 4kΩ dV / dt (c) VCC + dV / dt Rin 120Ω

ΔVF / ΔTa – IF Forward current I F ( m A ) Forward voltage temperature coefficient ΔVF / ΔTa (mV / °C) －3.2 －0.4 0.1 －2.0 －1.6 －1.2 －0.8 1 3 10 30 50 －2.4 0.3 －2.8 IT(RMS) – Ta Ambient temperature Ta (°C) R.M.S. on-state current IT(RMS) (mA) 120 －20 100 0 40 80 100 120 60 20 IF – VF Forward voltage V F (V) Forward current I F ( m A ) 100 0.1 0.6 0.3 Ta = 25°C 0.5 IFP – VFP Pulse forward voltage V FP (V) Pulse forward current I FP (mA) 1000 0.6 Pulse width ≤ 10 μs Repetitive frequency = 100 Hz Ta = 25°C 1.0 2.2 2.6 3.0 500 100 1.4 1.8 300 Allowable forward current I F (mA) IF – Ta 120 －20 0 20 40 80 100 60 Ambient temperature Ta (°C) IFP – DR Duty cycle ratio D R Allowable pulse forward Current I FP ( m A ) 3000 1000 100 10－3 3 10 －2 3 10 －1 3 100 Pulse width ≤ 100 μs Ta = 25°C 500

Peak off-state current IDRM (arbitrary unit) Normalized IDRM – Ta Ambient temperature Ta (°C) 100 103 101 100 20 40 80 60 102 VDRM=Rated 1.8 Normalized LED Current －LED Current Pulse Width Led current pulse width P w ( μs) Normalized LED current IF / IFT 1.4 1.6 50 100 300 500 1000 1.2 Trigger LED current IFT (arbitrary unit) Normalized IFT – Ta Ambient temperature Ta (°C) 100 －40 －20 0 80 40 0.1 1.2 0.5 20 60 VT＝6V 0.3 Holding current IH (arbitary unit) Normalized IH – Ta Ambient temperature Ta (°C) 100 －40 0.5 0.3 －20 0 20 60 80 40 0.1 1.2 100 －40 －20 0 80 40 20 60 Off-state output terminal voltage VDRM (arbitrary unit) Normalized VDRM – Ta Ambient temperature Ta (°C) 1.4 0.8 0.4 0.2 1.0 1.2 0.6

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • GaAs(Gallium Arsenide) is used in this product. The dus t or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.