TLP102

TLP102_05 TOSHIBA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

TOSHIBA PHOTOCOUPLER GaA ℓAs IRED & PHOTO-IC TLP102 Intelligent Power Module Signal Isolation Industrial Inverters Motor Drive The Toshiba TLP102 consists of a GaAℓAs light-emitting diode and an integrated high-gain, high-speed photodetector. The TLP102 is suitable for isolating input control signals to intelligent power modules. This unit is a 6-pin MFSOP. The detector has a totem pole output stage to provide source drive and sink drive and features a built-in Schmitt trigger. The detector IC has an internal shield that provides a guaranteed common-mode transient immunity of 10 kV/μs. The TLP102 is of an inverter logic type. A buffer logic version, the TLP106, is also available. z Inverter logic type (totem pole output) z G u a r a n t e e d p e r f o r m a n c e o v e r t e m p e r a t u r e : - 4 0 ~ 8 5 ° C z Power supply voltage: -0.5~20 V z Input current: IFHL = 3 mA (Max.) z Switching time (tpLH/tpHL): 400 ns (Max.) z Common-mode transient immunity: 10 kV/μs z Isolation voltage: 3750 Vrms Truth Table Input LED Tr1 Tr2 Output H ON OFF ON L L OFF ON OFF H TOSHIBA 11-4C2 Weight: 0.09 g(typ.) Unit in mm Pin Configuration (Top View) Schematic 1:ANODE 3:CATHODE 4:GND 5:VO 6:VCC 0.1 μF bypass capacitor must be connected between pins 6 and 4 VCC GND SHIELD 3 4 VCC VO GND ICC IO 4SHIELD IF VF Tr1 Tr2

Recommended Operating Conditions CHARACTERISTIC SYMBOL MIN. TYP. MAX. UNIT Input Current, ON IF (ON) 5 - 10 mA Input Voltage, OFF VF (OFF) 0 - 0.8 V Supply Voltage VCC 4.5 - 20 V Operating Temperature Topr -40 - 85 °C Maximum Ratings (Ta = 25°C) CHARACTERISTIC SYMBOL RATING UNIT Forward Current IF 20 mA Peak Transient Forward Current (Note 1) IFPT 1 A LED Reverse Voltage VR 5 V Output Current 1 (Ta ≤ 25°C) IO1 15/-15 mA Output Current 2 (Ta = 85°C ) I O 2 4 . 5 / - 4 . 5 m A Peak Output Current IOP 20/-20 mA Output Voltage VO -0.5~20 V DETECTOR Supply Voltage VCC -0.5~20 V Operating Temperature Range Topr -40~85 °C Storage Temperature Range Tstg -55~125 °C Lead Solder Temperature (10 s) Tsol 260 °C Isolation Voltage (AC,1 min., R.H. ≤ 60%, Ta = 25°C) (Note 2) BVs 3750 Vrms Note 1: Pulse width PW ≤ 10 μs, 500 pps. Note 2: Product considered a two-te rminal device: pins 1 and 3 shorted together and pins 4, 5 and 6 shorted together.

Electrical Characteristics

(Unless otherwise specified, Ta = -40~85°C, VCC = 4.5~20 V.) CHARACTERISTIC SYMBOL TEST CIRCUIT CONDITION MIN. TYP. MAX. UNIT Input Forward Voltage VF ― IF = 5 mA , Ta = 25°C ― 1.5 1.7 V Temperature Coefficient of Forward Voltage ΔVF/ΔTa ― IF = 5 mA ― -2.0 ― mV/ °C Input Reverse Current IR ― VR = 5 V , Ta = 25°C ― ― 10 μA Input Capacitance CT ― V = 0 , f = 1 MHz , Ta = 25°C ― 30 ― pF Logic LOW Output Voltage VOL 1 IOL = 3.5 mA , IF = 5 mA ― 0.1 0.35 V VCC = 5 V 2.4 3.1 ― Logic HIGH Output Voltage VOH 2 IOH = -3.5 mA, VF = 0.8 V VCC = 20 V 17.4 18.1 ― V VCC = 20 V Logic LOW Supply Current ICCL 3 IF = 5 mA VCC = 5 V mA VCC = 20 V Logic HIGH Supply Current ICCH 4 VF=0V VCC = 5 V mA Logic LOW Short Circuit Output Current IOSL 5 IF = 5 mA VCC = VO = 20 V 7 37 ― mA Logic HIGH Short Circuit Output Current IOSH 6 VF = 0 V, VO = GND VCC = 20 V -7 -40 ― mA Input Current Logic LOW Output IFHL ― IO = 3.5 mA, VO < 0.4 V ― 0.3 3 mA Input Voltage Logic HIGH Output VFLH ― Input Current Hysteresis IHYS ― VCC = 5 V ― 0.05 ― mA *All typical values are at Ta = 25°C. Isolation Characteristics (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Capacitance Input to Output CS V = 0, f = 1 MHz (Note 2) ― 0.8 ― pF Isolation Resistance RS (Note 2) 1×1012 1014 ― Ω AC, 1 minute 3750 ― ― V rms AC, 1 second, in oil ― 10000 ― Isolation Voltage BVS DC, 1 minute, in oil ― 10000 ― Vdc

(Unless otherwise specified, Ta = -40~85°C,VCC = 4.5~20 V.) CHARACTERISTIC SYMBOL TEST CIRCUIT CONDITION MIN. TYP. MAX. UNIT Propagation Delay Time to Logic HIGH Output tpLH IF = 5→0 mA, CL = 100 pF VCC = 20 V 50 250 400 ns Propagation Delay Time to Logic LOW Output tpHL IF = 0→5 mA, CL = 100 pF VCC = 20 V 50 270 400 ns Switching Time Dispersion between ON and OFF |tpHL- tpLH| CL = 100 pF ― ― 350 ns Output Rise Time tr IF = 5→0 mA, VCC = 20 V ― 175 ― ns Output Fall Time tf IF = 0→5 mA, VCC = 20 V ― 95 ― ns Propagation Delay Time to Logic HIGH Output tpLH IF = 5→0 mA 50 ― 400 ns Propagation Delay Time to Logic LOW Output tpHL IF = 0→5 mA 50 ― 400 ns Common-Mode Transient Immunity at HIGH Level Output CMH VCM = 1000 Vp-p, IF = 0 mA, VCC = 20 V, Ta = 25°C 10000 ― ― V/us Common-Mode Transient Immunity at LOW Level Output CML VCM = 1000 Vp-p, IF = 5 mA, VCC = 20 V, Ta = 25°C -10000 ― ― V/us *All typical values are at Ta = 25 °C. TEST CIRCUIT 1 : VOL TEST CIRCUIT 2 : VOH TEST CIRCUIT 3 : ICCL TEST CIRCUIT 4 : ICCH TEST CIRCUIT 5 : IOSL TEST CIRCUIT 6 : IOSH VCC IF VCC GND SHIELD 0.1uF VOL V IOL VCC GND SHIELD VCC ICCH A ICCL VCC 1 6 VCC GND SHIELD A IF VCC GND SHIELD 0.1uF VOH VCC V IOH ↑ IF → VCC GND SHIELD 0.1uF VO IOSL A VCC VCC VCC GND SHIELD 0.1uF IOSH A VO

TEST CIRCUIT 7: Switching Time Test Circuit VCC VCC GND SHIELD IF VO 0.1uF CL VO IF VOH VOL tpLHtpHL 1.3V 50% tf tr 90% 10% TEST CIRCUIT 8: Switching Time Test Circuit VCC GND SHIELD VO 0.1uF CL VCC IF 620Ω 5kΩ VO IF VOH VOL tpLH tpHL 1.3V 50% tf tr 90% 10% TEST CIRCUIT 9: Common-Mode Transient Immunity Test Circuit 0.1uF VO VCC SW IF １ VCＭ A B CML CMH VCM 10% 90% 1000Ｖ ・SW B : IF=0mA ・SW A : IF=5mA 17V VO tr tf VCC GND SHIELD ) ( ) ( 800 str V HCM μ= ) ( ) ( 800 st f V LCM μ= CL: stray capacitance of probe and wiring (to 15 pF)

RESTRICTIONS ON PRODUCT USE 20070701-EN

• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
• The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dus t or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically.
• Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.