TLOH190P_06 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

TLOH190P(F) 2006-01-20 1 TOSHIBA LED Lamp InGaA ℓP Orange Light Emission TLOH190P(F) Panel Circuit Indicator

  • Lead(Pb)-free products (lead: Sn-Ag-Cu)
  • 10mm package
  • InGaAℓP technology
  • All plastic mold type.
  • Colorless clear lens
  • Low drive current, high intensity orange light emission Recommended forward current: I F = 1~20mA (DC)
  • All plastic molded lens, provides an excellent on−off contrast ratio.
  • Fast response time, capable of pulse operation.
  • High power luminous intensity
  • Without stand−offs
  • Applications: Suitable for outdoor message signboard, safety equipment. Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Forward current (DC) I F 50 mA Reverse voltage V R 4 V Power dissipation P D 125 mW Operating temperature range T opr −30~85 °C Storage temperature range T stg −40~120 °C Unit in mm 1 2 JEDEC ― EIAJ ― TOSHIBA 4-10F1 Weight: 1.0g For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: info@marktechopto.com

TLOH190P(F) 2006-01-20 2 Electrical And Optical Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Min Typ. Max Unit Forward voltage V F I F = 20mA ― 2.1 2.5 V Reverse current I R V R = 4V ― ― 50 µA TLOH190P(F) 8500 33000 ― Luminous intensity TLOH190P(XY,F) IV IF = 20mA (Note) 15300 ― 73600 mcd Peak emission wavelength λP I F = 20mA ― (612) ― nm Spectral line half width ∆λ I F = 20mA ― 15 ― nm Dominant wavelength λd I F = 20mA ― 605 ― nm (Note):Lamps are classified into the following ranks according to their luminous intensityɼand packed in boxes by each rankɽ W: 8500 ʵ2300mcd, X: 15300ʵ41400mcd, Y: 27200mcdʵ Precaution Please be careful of the followings

  • Soldering temperature: 260°Cmax soldering time: 3s max (Soldering portion of lead: up to 1.6mm from the body of the device)
  • If the lead is formed, the lead should be formed up to 1.6mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming.
  • This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light.

TLOH190P(F) 2006-01-20 3 Relative Luminous Intensity – Wavelength Wavelength λ (nm) Relative luminous intensity I V 1.0 540 0.8 0.6 0.4 0.2 560 580 600 620 640 660 IF = 20mA Ta = 25°C I F – Ta Ambient temperature Ta (°C) Allowable forward current IF (mA) 0 20 40 60 80 100 IF – VF Forward voltage V F ( V ) Forward current I F ( m A ) 1.6 Ta = 25°C 2.3 I V – Tc Case temperature Tc (°C) Relative luminous intensity I V 0.1 −20 0.3 0.5 0 20 40 60 IV – IF Forward current I F ( m A ) Luminous intensity I V (mcd) 50000 100000 30000 5000 3000 1000 500 3 5 10 30 50 0.5 100 10000 Ta = 25°C Radiation Pattern Ta = 25°C 0 0.2 0.4 0.6 0.8 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 10° 20° 30° 40° 50° 60° 70° 80° 90°

TLOH190P(F) 2006-01-20 4

  • TOSHIBA is continually working to im prove the quality and reliability of it s products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inhe rent electrical sensitivity and vulnerability to physical stress. It is the responsibility of t he buyer, when utilizing TOSHIBA products , to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA pr oducts are used within specified operating ranges as set forth in the most recent TOSHIBA products specif ications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semicond uctor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
  • The TOSHIBA products listed in this document are inte nded for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunc tion or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control in struments, airplane or spaceship instruments, transportation instruments, traffic signa l instruments, combusti on control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk.
  • Gallium arsenide (GaAs) is a subst ance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intelle ctual property or other rights of the third parties which may re sult from its use. No license is grant ed by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. 000707EACRESTRICTIONS ON PRODUCT USE