TLN233

TLN233 TOSHIBA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

TLN233(F) 2007-10-01 1 TOSHIBA Infrared LED GaA ℓAs Infrared Emitter TLN233(F) Lead(Pb)-Free Infrared LED for Space-Optical-Transmission

• High radiant intensity: 80 mW/sr (typ.) at I F = 50 mA
• Half-angle value: θ1/2 = ±13° (typ.)
• A light source for remote control
• Wireless AV-signal transmission purposes
• High-speed data transmission purposes Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Forward current IF 100 mA Pulse forward current IFP 1000 (Note 1) mA Power dissipation PD 200 mW Reverse voltage VR 4 V Operating temperature range Topr −25~85 °C Storage temperature range Tstg −30~100 °C Soldering temperature (5 s), (Note 2) T sol 260 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: f = 100 kHz, duty = 1% Note 2: Soldering must be performed under the stopper. Unit: mm TOSHIBA 4-5V3 Weight: 0.3 g (typ.) Pin Connection 12 1. Anode 2. Cathode

TLN233(F) 2007-10-01 2 Optical and Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF I F = 100 mA ⎯ 1.6 2.0 V Reverse current IR V R = 4 V ⎯ ⎯ 60 μA Radiant intensity IE I F = 50 mA 46 80 ⎯ mW/sr Radiant power PO I F = 50 mA ⎯ 30 ⎯ mW Cut-off frequency fc I F = 50 mA + 5 mAP-P (Note 3) ⎯ 15 ⎯ MHz Peak emission wavelength λP I F = 50 mA ⎯ 870 ⎯ nm Half-angle value θ 2

1 IF = 50 mA ⎯ ±13 ⎯ °

Note 3: This is the frequency when modulation lig ht power decreases by 3 dB from 1 MHz. Handling Precautions

• Soldering must be performed under the stopper.
• When forming the leads, bend each lead at least 5 mm from the package body. Soldering must be performed after the leads have been formed.
• The radiant intensity decreases over time due to current flowing in the infrared LED. When designing circuits, take into account the change in radiant intensity over time. The change in radiant intensity is equal to the reciprocal of the change in LED infrared optical output: P (0) o P (t) o I (0) E I (t) E= .

TLN233(F) 2007-10-01 3 Allowable pulse forward current I FP (mA) Pulse forward current I FP (mA) Ambient temperature Ta (°C) IF – Ta Allowable forward current I F (mA) Forward voltage V F ( V ) I F – VF (typ.) Forward current I F ( m A ) Ambient temperature Ta (°C) V F – Ta (typ.) Forward voltage V F ( V ) Pulse forward voltage V FP (V) I FP – VFP (typ.) Pulse width P w ( μs) IFP – Pw Pulse forward current I FP (mA) Relative IE – IFP Relative radiant intensity 0 20 40 60 80 100 100 120 0.01 0.1 100 −25°C 0°C Ta = 25°C 50°C 75°C 85°C −50 −25 0 25 50 75 100 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 IF = 10 mA 30 mA 50 mA 70 mA 100 mA 0 1 2 3 4 5 100 1000 300 Pulse width < = 100 μs Repetitive frequency = 100 Hz Ta = 25°C 1 10 100 1000 10000 100 1000 10000 300 3000 Ta = 25°C f = 100 Hz 200 Hz 500 Hz 1 kHz 2 kHz 5 kHz 10 kHz 0 200 400 600 800 1000 1200 0.2 0.4 0.6 0.8 1.0 1.2 Pulse width = 1 ms Duty = 10% Ta = 25°C

TLN233(F) 2007-10-01 4 30° 60° 90° 90° 30° 60° 0 1.0 80° 70° 50° 40° 20° 10° 70° 50° 40° 20° 10° 0.80.6 0.4 0.2 Relative radiant power Ta = 25°C 80° Wavelength λ (nm) Wavelength characteristic Relative power intensity Ambient temperature Ta (°C) Relative I E – Ta (typ.) Relative radiant intensity Radiation pattern (typ.) 700 740 780 820 860 900 940 980 0.2 0.4 0.6 0.8 IF = 50 mA 0.1 −50 −25 0 25 50 75 100 0.3 IF = 50 mA

TLN233(F) 2007-10-01 5 RESTRICTIONS ON PRODUCT USE 20070701-EN

• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
• The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dus t or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically.
• Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.