TLN AVX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

pF code: 1st two digits represent significant figures, 3rd digit represents multiplier M Tolerance M = ±20% 006 Rated DC Voltage 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc HOW TO ORDER R Packaging R = Pure Tin 7" Reel Technical Data: All technical data relate to an ambient temperature of +2 5°C Capacitance Range: 1000 μF to 3300 μF Capacitance Tolerance: ±20% Leakage Current DCL: 0.01CV Rated Voltage (VR) -55°C /H11349+40°C: 4 6.3 10 Category Voltage (VC) at 85°C: 2 3.2 5 Category Voltage (VC) at 125°C: 0.8 1.3 2 Temperature Range: -55°C to +125°C with category voltage Reliability: 0.2% per 1000 hours at 85°C, 0.5xVR with 0.1Ω/V series impedance with 60% confidence level TECHNICAL SPECIFICATIONS TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series 0055 ESR in mΩ

FEATURES

  • Large case size for maximum capacitance
  • 3x reflow 260°C compatible
  • Low profile solution
  • Consumer applications (e.g. PCMCIA/USB wireless express cards etc.)
  • CV range: 1000-3300μF / 4-10V
  • 2 case sizes available

APPLICATIONS

  • Data transfer modems
  • SSD backup circuits LEAD-FREE COMPATIBLE COMPONENT MARKING 4, 6 CASE XXXXX

228 J AVX LOGO

228 = 2.2mF Rated Voltage J = 6.3V Polarity Band (Anode+) ID Code W WP AP S H AN WN WL Polarity Band (Anode+) CASE DIMENSIONS:millimeters (inches) 071119 55

Capacitance Voltage Rating DC (V R) to 85°C μF Code 4V (G) 6.3V (J) 10V (A) 680 687 1000 108 4(100)/6(55) 1500 158 4(100) 6(55) 2200 228 6(55) 3300 338 6(55) CAPACITANCE AND RATED VOLTAGE RANGE (FIGURE DENOTES CASE SIZE) TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series Released ratings (ESR ratings in mOhms in parentheses) Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximu m DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalogue limit post mounting DCL allowed to move up to 2.00 times catalogue limit post mounting For typical weight and composition see page 274. NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reli ability standards. Rated Rated Category Category DCL ESR 100kHz RMS Current (mA) AVX Case Capacitance Voltage Temperature Voltage Temperature Max. Max. MSL Part No. Size (μF) (V) (ºC) (V) (ºC) (μA) @ 100kHz 25ºC 85ºC 125ºC (mΩ)

4 Volt @ 40°C

TLN6338M004#0055 6 3300 4 40 0.8 125 132 55 2045 1840 818 3

6.3 Volt @ 40°C

TLN4158M006#0100 4 1500 6.3 40 1.3 125 90 100 1285 1156 514 3 TLN6228M006#0055 6 2200 6.3 40 1.3 125 132 55 2045 1840 818 3

10 Volt @ 40°C

TLN4108M010#0100 4 1000 10 40 2 125 100 100 1285 1156 514 3 TLN6108M010#0055 6 1000 10 40 2 125 100 55 2045 1840 818 3 TLN6158M010#0055 6 1500 10 40 2 125 150 55 2045 1840 818 3 56 071119

Voltage vs Temperature Rating 100% 100% 33% 67% 50% 20% 80% 80% 20% 40% 60% 80% 100% 120% -55°C 40°C 0°C 60°C 85°C 125°C 105°C rated range recommended derating TEST TLN PulseCapTM series (Temperature range -55ºC to +125ºC) Condition Characteristics Visual examination no visible damage DCL 2 x initial limit ΔC/C within +5/-30% of initial value ESR 1.25 x initial limit Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±10% of initial value ESR 1.25 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC DCL 2 x IL* n/a 2 x IL* 20 x IL* 25 x IL* 2 x IL* Visual examination no visible damage DCL 2 x initial limit ΔC/C within ±5% of initial value ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit Apply rated voltage (Ur) at 40ºC and / or category voltage (Uc) at 85ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 90-95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Apply 1.3x rated voltage (Ur) at 40ºCfor 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω Step Temperature°C Duration(min) 1 +20 15 2 -55 15 3 +20 15 4 +85 15 5 +125 15 6 +20 15 QUALIFICATION TABLE *Initial Limit TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series Endurance Humidity Temperature Stability Surge Voltage MIL-STD-202, Method 213, Condition C MIL-STD-202, Method 204, Condition D Mechanical Shock Vibration 071119 57

High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONVENTIONAL SMD MnO 2 58 071119