TLL-62BR MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Page <1> V1.018/11/20 Tactile Switch Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Features:
- Sharp click with positive tactile feed-back
- Ultraminiature and light weight
- Contact moulding prevents flux build-up enabling auto-dipping Specifications: Mechanical: Switch Terminals : Through Hole External Length / Height : 7mm External Width : 6.1mm Height : 4.8mm No. of Electrical Operations : 20,0000 Series : TLL Switch Operation : SPNO Operation Force : 160 ±50gf TL(L)-62 Stroke : 0.2 +/-0.1mm Operation Temperature : -25°C to +70°C Storage Temperature : -30°C to +80°C Electrical: Electrical Life : 200,000 cycle minimum Rating : 50mA, 12V DC Contact Resistance : 100mΩ Max. Insulation Resistance : 100MΩ Max. 500V DC Dielectric Strength : 250V AC/minute Contact Arrangement : SPST Materials: Contact Disc : Stainless steel Terminal : Brass with Silver plating Base : LCP high-temperature thermoplastic Colour : Black Stem : NYLON high-temperature. Thermoplastic Colour : Brown Soldering Process: Wave Soldering : Recommended solder temperature at 500°F (260°C) Max. 5 Seconds Hand Soldering : Use a soldering iron of 30 watts, Controlled at 608°F (320°C) approximately 2 seconds PCB Layout Circuit Diagram 1 2 3 4 5 6
Page <2> V1.018/11/20 Tactile Switch Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Description Led Colour Part Number Tactile Switch Red TLL-62BR Yellow TLL-62BY Green TLL-62BG Part Number Table Dimensions : Millimetres (Inches) TACT With LED Illumination Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.