TLD7002-16SHIELD

TLD7002-16SHIELD INFINEON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 14

Technical content

The TLD7002-16SHIELD is an LED driver shield compatible with Arduino UNO. The TLD7002-16ES is a 16 independent-channel-LED driver with individual output current from 5 mA to 76 mA and UART over CAN interface. The scope of this user manual is to provide instructions on use of the TLD7002-16SHIELD for a jump-start on the TLD7002-16ES programming with the simple Arduino IDE. This user guide describes the TLD7002-16SHIELD with PCB version P03 and P04 in which, only thermal vias are changed. Additionally, schematic version S03 is described. This board will be used during design-in, for evaluation and proof of concepts for new projects adopting the TLD7002-16ES. Figure 1 TLD7002-16SHIELD Intended audience Hardware engineers and software engineers User guide Please read the sections "Important notice" and "Warnings" at the end of this document Rev.1.00 www.infineon.com 2022-07-26

User guide 2 Rev.1.00 2022-07-26

1 Description

The core of the shields is the TLD7002-16ES which features:

• Output current up to 16 x 76.5 mA
• UART over CAN interface up to 2 Mbit/s compliant with ISO11898-2 (2016) CAN physical layer
• 16 independent 14-bit PWM engines from 100 Hz up to 2 kHz
• Integrated diagnostics for load monitoring and device fault monitor
• ISO26262 compliant development up to ASIL B The only needed connection from Arduino to drive 16 mid power LEDs is an UART interface and optionally the TLD7002-16ES GPIN0 pin, which acts as a chip-select during the TLD7002-16ES one time programmable (OTP) memory programming/emulation.

1.1 UART over CAN interface connections

The TLD7002-16ES has an UART over CAN physical layer interface called HSLI (High Speed Lighting Interface) which is a differential BUS. The HSLIL output pin it is an open drain with a diode in series, and it can be connected directly to a standard UART with a simple workaround without the need for a transceiver. The resulting logic levels on the RX and TX pins are not CMOS or TTL compliant, and they will have slightly reduced noise margin compared to standard CMOS gates. µC UART TX UART RX HSLIH HSLIL HSLIH HSLIL HSLIH HSLIL U1 TLD7002-16ES CBUS RTX = 1k 2.5 V 40k typ 40k typ 5VRUP RDN 3k3 3k3 2.5V 2.5V 2.5V U2 TLD7002-16ESU3 TLD7002-16ES Figure 2 TLD7002-16ES direct UART connection Arduino has an internal pull up on the RX pin therefore, instead of the resistor on the TX pin, a diode is placed on the TX pin. See Figure 3. TLD7002-16SHIELD User guide User guide 3 Rev.1.00 2022-07-26

µC(HW)RX µC(SW)TX GND TLD7002-16 Figure 3 TLD7002-16SHIELD HSLI interface and GPIN0 connections The TLD7002-16ES UART has a 200 kbps minimum speed. In order to have the serial monitor prints available for debugging, the TLD7002-16ES has been connected to a soft serial port for the Arduino TX, and a hardware serial port for the Arduino RX signal. UART speed has been set to a standard 230400 bps. This soft/hard serial division is needed because the soft serial cannot handle 230 kbps in reception, and therefore it is not possible to have both soft serial for TX and RX connected to TLD7002-16ES UART . The soft serial library has been slightly modified in order to handle the 230 kbps with reduced delay on adjacent bytes. The Arduino UNO can be programmed even if the TLD7002-16SHIELD is plugged into the Arduino.

1.2 TLD7002-16ES Power supply options

The TLD7002-16ES applications has 2 supply rails:

• VS to power TLD7002-16ES device (VS pin, 6 V to 20 V functional range)
• VLED to power the LEDs Since its outputs are linear current sources, when possible is better to keep VLED voltage close to the LED load voltage plus the TLD7002-16ES dropout, to limit the power dissipation on the LED driver. Since the load is only 1 LED per output, the recommended VLED is approximately 4 V, while the VS must be higher than 6 V. In order to avoid 2 power supplies connected to the TLD7002-16ES shield, and to supply the board directly by the Arduino USB, a charge pump has been designed on Arduino pin 9 and 10. The power supply connections are illustrated below. TLD7002-16SHIELD User guide

User guide 4 Rev.1.00 2022-07-26

D9_PWM D 2 N X P_BA T46W J5V _A RD U IN O D 4 N X P_BA T46W J GN DC6 4.7uF 25V 0805 D10_PWM 470nF 25V 0603 470nF 25V 0603 D10 ArduinoUSBVS≈ 9Vcharge pump Arduino sch. 5V USB protection circuit VLED Arduino sch. 5V from Vin regulator JVLED Jumper VS_REV 5V_REV 5V_arduino D5D6 Figure 4 TLD7002-16SHIELD power supply connections with Arduino UNO R3 The TLD7002-16ES output currents can be as high as 76.5 mA per channel, for a total current of 1224 mA in case all outputs are on @100% duty. The current setting on the TLD7002-16ES outputs must be adjusted in order to avoid damages to the Arduino UNO circuitry. In the provided sketch, the LED current has been set to 20 mA for a total LED current of 320 mA. The board can be powered in several ways:

• Arduino USB B connector - Keep total LED current below 400 mA to avoid damages to Arduino T1 transistor, see Figure 4
• Powering the Arduino VIN port with 7 V to keep power on the Arduino LDO (IC2) low - Keep total LED current below 400 mA
• Providing external 5 V to the Arduino 5V_REV test point with an external power supply - Keep total LED current below 800 mA to avoid damages to D5 and D3 - Do not exceed 5.5 V or the the Arduino UNO board will be damaged
• Powering the Arduino with one power supply (Either at VIN or USB) while VLED is powered by an external power supply (4 V to 6 V is recommended). Remove JVLED Jumper for this option - Total LED current can go up to 1224 mA TLD7002-16SHIELD User guide

User guide 5 Rev.1.00 2022-07-26

2 Quick start procedure

A step-by-step procedure is laid out for setting up and running the shield. 1. Download the TLD7002SHIELD_DEMO sketch from the TLD7002SHIELD webpage 2. Plug the TLD7002SHIELD on the Arduino UNO board 3. Connect the TLD7002SHIELD to the PC with a USB cable 4. Download and open the Arduino IDE [1] 5. Select the correct COM PORT on the Tools > Port menu 6. Upload the TLD7002SHIELD_DEMO sketch in the Arduino UNO 7. Press BUTTON on TLD7002-16SHIELD to change the animation 8. Optional: open Tools > Serial Monitor and set the speed to 230400 bps to see diagnostic printf Figure 5 TLD7002-16SHIELD plugged in the Arduino UNO with USB cable The TLD7002-16SHIELD is equipped with efficient white LEDs, therefore in order to keep the glare low, a duty cycle is set to 10% on the TLD7002-16DEMO sketch V.1.0. The brightness can be easily increased by modifying the provided sketch.

2.1 OTP configuration array and OTP wizard tool

The TLD7002-16SHIELD is assembled with a TLD7002-16ES device with unwritten OTP . The TLD7002SHIELD_DEMO sketch V.1 initialize the TLD7002-16ES device by emulating the LED driver OTP with a hard-coded configuration array: const uint16 OTP_hex_cfg[] = {0x0000, 0x0000, 0x0000, 0x0000, 0x4D4D...}; This is needed because the TLD7002-16ES cannot be in ACTIVE mode if the OTP has not been written or emulated. A different configuration array can be easily generated by the OTP wizard tool. The OTP wizard is a GUI/tool used to easily configure the OTP memory of the TLD7002-16ES device. The OTP configuration array is prepared in advance. This can be easily achieved by clicking save configuration in the OTP wizard tool. The configuration array is located at the end of the .ocfg saved file: in the HEX_DATA_16BIT field. The file is of txt format and can be opened with a text editor. TLD7002-16SHIELD User guide User guide 6 Rev.1.00 2022-07-26

The OTP wizard GUI is installed via the Infineon Developer Center Launcher (IDC) [2] following one of the 2 installation paths: Infineon Developer Center [3]: online repository listing all available tools, software and services Launcher [4]: offline utility to manage and update all tools after downloading from the IDC online repository Once IDC is installed, run it and click on Manage Tools. Figure 6 Manage Tools Then search for OTP Wizard (point 1) and click on Install (point 2). Figure 7 Searching Tools Once OTP wizard installation has completed, select My Tools tab (point 3) in Infineon Toolbox, then click on Start (point 4) in OTP Wizard to start the tool. Figure 8 Starting the OTP Wizard GUI TLD7002-16SHIELD User guide User guide 7 Rev.1.00 2022-07-26

3 Electrical characteristics

Table 1 Electrical characteristics Parameter Symbol Values Unit Note or test condition Min. Typ. Max. Input voltage VIN_5V 4.5 5 5.5 V VIN_5V is directly connected to Arduino 5 V, voltage higher than 5.5 V will damage your Arduino UNO Input current IIN_5V 50 470 1300 mA TLD7002SHIELD_DEMO sketch sets OUT current to 25 mA per channel. If duty cycle is modified to 100% and all outputs are ON, then the 5 V current will be approximately 470 mA LED power supply VLED 4.5 – 35 V VLED can be as low as 0 V if JVLED jumper is open and JVLED resistor not populated TLD7002-16ES power supply VS 6 – 20 V – Output voltage VOUT_n 0 – 20 V Diagnostic setting has to be adapted in the OTP configuration file for the shield to be used with different loads Output current IOUT_n 5.6 – 76.5 mA TLD7002SHIELD_DEMO V1 is set to 25 mA PWM frequency fPWM 99.9 – 1997 Hz – The input current on the TLD7002-16SHIELD is equal to the sum of all of the following:

• The LED currents multiplied by their duty cycle
• The TLD7002-16ES supply current (VS pin) multiplied by 2, due to the charge pump
• The Arduino UNO supply current In the provided sketch the output current is set to 20 mA per channel, if duty cycle is set to 100% and all outputs are ON, the current consumption would be approximately: I5V_REF = IOUT_n ⋅ 16 + IVS_typ + IArduinoUNO _typ = 25mA ⋅ 16 + 15mA ⋅ 2 + 40mA = 470mA (1) TLD7002-16SHIELD User guide

User guide 8 Rev.1.00 2022-07-26

4 Bill of material

Designator Description Footprint Quantity 5V, GND3, GND4, GPIO0, GPIO1, HSLI-H, HSLI-L, VDD, VLED, VS, VS_REV NO_POP_KEYSTONE 5117-1 TESTPAD KEYSTONE 5117-1 AD NO_POP_Head 6 STRIP 6V P2.54 MD 1 BUTTON PTS636 SK25F SMTR LFS PULS 6,1X3,5 SMD C&K PTS636 F C1, C2, C6 4.7uF 25V 0805 C0805 3 C3, C4, C7 470nF 25V 0603 C0603 3 C5 100nF 16V 0603 C0603 1 COUT0, COUT1, COUT2, COUT3, COUT4, COUT5, COUT6, COUT7, COUT8, COUT9, COUT10, COUT11, COUT12, COUT13, COUT14, COUT15 10nF C0603 16 D1, D2, D3, D4, D5, D6 BAS3010A-03W SOD323F 6 DA0, DA1, DA2, DA3, DA4, DA5, DA6, DA7, DA8, DA9, DA10, DA11, DA12, DA13, DA14, DA15 JB2835AWT-W-H30 LED SMD 2835 CREE JE2835AWTE IOH NO_POP_Head 10 STRIP 10V P2.54 MD 1 IOL, POWER NO_POP_Head 8 STRIP P2.54 2 J0, J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, JVLED 0R 0603 17 JBUT NO_POP TSW-102-08-G-S STRIP P2.54 1 NTC1 Mitsubishi TD11-3H103F NTC(0603 10K 3370K) R0603 1 R1 10k 1% 0603 R0603 1 R2, R3, R4, R5 4k7 1% 0603 R0603 4 U1 TLD7002-16ES PG-TSDSO-24 1 TLD7002-16SHIELD User guide User guide 9 Rev.1.00 2022-07-26

5 PCB layout

5V_REV COUT15 COUT14 COUT13 COUT12 COUT11 COUT10 COUT9 COUT8 COUT7 COUT6 COUT5 COUT4 COUT3 COUT2 COUT1 COUT0 VS_REV VLED NTC1 HSLI-L HSLI-H GPIO1 GPIO0 DA15DA14DA13DA12 DA11DA9DA8 DA7DA6DA5DA4 DA3DA2DA1DA0 POWER IOLIOH AD PA5V01 CO5V PA5V0REV01 CO5V0REV PAAD03 PAAD04 PAAD05 PAAD06 PAAD02 PAAD01 COAD PABUTTON01 PABUTTON02 COBUTTON PAC101 PAC102 COC1 PAC201 PAC202 COC2 PAC302 PAC301 COC3 PAC401 PAC402 COC4 PAC502 PAC501 COC5 PAC602 PAC601 COC6 PAC701 PAC702 COC7 PACOUT001 PACOUT002 COCOUT0 PACOUT102 PACOUT101 COCOUT1 PACOUT201 PACOUT202 COCOUT2 PACOUT302 PACOUT301 COCOUT3 PACOUT401 PACOUT402 COCOUT4 PACOUT502 PACOUT501 COCOUT5 PACOUT601 PACOUT602 COCOUT6 PACOUT702 PACOUT701 COCOUT7 PACOUT801 PACOUT802 COCOUT8 PACOUT902 PACOUT901 COCOUT9 PACOUT1001 PACOUT1002 COCOUT10 PACOUT1102 PACOUT1101 COCOUT11 PACOUT1201 PACOUT1202 COCOUT12 PACOUT1302 PACOUT1301 COCOUT13 PACOUT1401 PACOUT1402 COCOUT14 PACOUT1502 PACOUT1501 COCOUT15 PAD10A PAD10K COD1 PAD20K PAD20A COD2 PAD30A PAD30K COD3 PAD40K PAD40A COD4 PAD50A PAD50K COD5 PAD60K PAD60A COD6 PADA00A PADA00K CODA0 PADA10A PADA10K CODA1 PADA20A PADA20K CODA2 PADA30A PADA30K CODA3 PADA40A PADA40K CODA4 PADA50A PADA50K CODA5 PADA60A PADA60K CODA6 PADA70A PADA70K CODA7 PADA80A PADA80K CODA8 PADA90A PADA90K CODA9 PADA100A PADA100K CODA10 PADA110A PADA110K CODA11 PADA120A PADA120K CODA12 PADA130A PADA130K CODA13 PADA140A PADA140K CODA14 PADA150A PADA150K CODA15 PAGND101 COGND1 PAGND201 COGND2 PAGND301 COGND3 PAGND401 COGND4 PAGND501 COGND5 PAGPIO001 COGPIO0 PAGPIO101 COGPIO1 PAHSLI0H01 COHSLI0H PAHSLI0L01 COHSLI0L PAIOH03 PAIOH04 PAIOH05 PAIOH06 PAIOH02 PAIOH01 PAIOH07 PAIOH08 PAIOH09 PAIOH010 COIOH PAIOL08 PAIOL07 PAIOL01 PAIOL02 PAIOL06 PAIOL05 PAIOL04 PAIOL03 COIOL PAJ002 PAJ001 COJ0 PAJ101 PAJ102 COJ1 PAJ202 PAJ201 COJ2 PAJ301 PAJ302 COJ3 PAJ402 PAJ401 COJ4 PAJ501 PAJ502 COJ5 PAJ602 PAJ601 COJ6 PAJ701 PAJ702 COJ7 PAJ802 PAJ801 COJ8 PAJ901 PAJ902 COJ9 PAJ1002 PAJ1001 COJ10 PAJ1101 PAJ1102 COJ11 PAJ1202 PAJ1201 COJ12 PAJ1301 PAJ1302 COJ13 PAJ1402 PAJ1401 COJ14 PAJ1501 PAJ1502 COJ15 PAJBUT01 PAJBUT02 COJBUT PAJVLED02 PAJVLED01 COJVLED COMK10 PANTC101 PANTC102 CONTC1 PAPOWER08 PAPOWER07 PAPOWER01 PAPOWER02 PAPOWER06 PAPOWER05 PAPOWER04 PAPOWER03 COPOWER PAR102 PAR101 COR1 PAR201 PAR202 COR2 PAR302 PAR301 COR3 PAR402 PAR401 COR4 PAR502 PAR501 COR5 PAU10EP PAU1020 PAU1019 PAU1018 PAU1017 PAU1016 PAU1015 PAU1014 PAU1013 PAU1012 PAU1010 PAU109 PAU108 PAU107 PAU106 PAU105 PAU104 PAU103 PAU102 PAU101 PAU1011 PAU1024 PAU1023 PAU1022 PAU1021 COU1 PAVDD01 COVDD PAVLED01 COVLED PAVS01 COVS PAVS0REV01 COVS0REV PA5V01 PAD20A PAD30A PAD50K PAPOWER04 PABUTTON02 PAIOL03 PAJBUT01 PAC401 PAIOH09 PAC701 PAIOH08 PABUTTON01 PAC101 PAC201 PAC301 PAC501 PAC601 PAGND101 PAGND201 PAGND301 PAGND401 PAGND501 PAJBUT02 PANTC101 PAPOWER02 PAPOWER03 PAR401 PAU1022 PAU10EP PAGPIO001 PAIOL01 PAU102 PAC502 PANTC102 PAR101 PAR501 PAU103 PAHSLI0H01 PAR201 PAR402 PAU1024 PAD10A PAHSLI0L01 PAIOL08 PAU1023 PAC202 PAR102 PAR202 PAU101 PAVDD01 PA5V0REV01 PAD50A PAC402 PAC702 PAD20K PAD40A PAD30K PAJVLED02 PAD60A PAVS0REV01 PADA00K PAJ002 PADA10K PAJ102 PADA20K PAJ202 PADA30K PAJ302 PADA40K PAJ402 PADA50K PAJ502 PADA60K PAJ602 PADA70K PAJ702 PADA80K PAJ802 PADA90K PAJ902 PADA100K PAJ1002 PADA110K PAJ1102 PADA120K PAJ1202 PADA130K PAJ1302 PADA140K PAJ1402 PADA150K PAJ1502 PAGPIO101 PAR502 PAR302 PAU104 PACOUT002 PAJ001 PAU105 PACOUT102 PAJ101 PAU106 PACOUT202 PAJ201 PAU107 PACOUT302 PAJ301 PAU108 PACOUT402 PAJ401 PAU109 PACOUT502 PAJ501 PAU1010 PACOUT602 PAJ601 PAU1011 PACOUT702 PAJ701 PAU1012 PACOUT802 PAJ801 PAU1013 PACOUT902 PAJ901 PAU1014 PACOUT1002 PAJ1001 PAU1015 PACOUT1102 PAJ1101 PAU1016 PACOUT1202 PAJ1201 PAU1017 PACOUT1302 PAJ1301 PAU1018 PACOUT1402 PAJ1401 PAU1019 PACOUT1502 PAJ1501 PAU1020 PAD10K PAIOL05 PAPOWER01 PAC102 PACOUT001 PACOUT101 PACOUT201 PACOUT301 PACOUT401 PACOUT501 PACOUT601 PACOUT701 PACOUT801 PACOUT901 PACOUT1001 PACOUT1101 PACOUT1201 PACOUT1301 PACOUT1401 PACOUT1501 PADA00A PADA10A PADA20A PADA30A PADA40A PADA50A PADA60A PADA70A PADA80A PADA90A PADA100A PADA110A PADA120A PADA130A PADA140A PADA150A PAJVLED01 PAR301 PAVLED01 PAC302 PAC602 PAD40K PAD60K PAU1021 PAVS01 Figure 9 PCB layout top PA5V01 CO5V PA5V0REV01 CO5V0REV PAAD03 PAAD04 PAAD05 PAAD06 PAAD02 PAAD01 COAD PABUTTON01 PABUTTON02 COBUTTON PAC101 PAC102 COC1 PAC201 PAC202 COC2 PAC302 PAC301 COC3 PAC401 PAC402 COC4 PAC502 PAC501 COC5 PAC602 PAC601 COC6 PAC701 PAC702 COC7 PACOUT001 PACOUT002 COCOUT0 PACOUT102 PACOUT101 COCOUT1 PACOUT201 PACOUT202 COCOUT2 PACOUT302 PACOUT301 COCOUT3 PACOUT401 PACOUT402 COCOUT4 PACOUT502 PACOUT501 COCOUT5 PACOUT601 PACOUT602 COCOUT6 PACOUT702 PACOUT701 COCOUT7 PACOUT801 PACOUT802 COCOUT8 PACOUT902 PACOUT901 COCOUT9 PACOUT1001 PACOUT1002 COCOUT10 PACOUT1102 PACOUT1101 COCOUT11 PACOUT1201 PACOUT1202 COCOUT12 PACOUT1302 PACOUT1301 COCOUT13 PACOUT1401 PACOUT1402 COCOUT14 PACOUT1502 PACOUT1501 COCOUT15 PAD10A PAD10K COD1 PAD20K PAD20A COD2 PAD30A PAD30K COD3 PAD40K PAD40A COD4 PAD50A PAD50K COD5 PAD60K PAD60A COD6 PADA00A PADA00K CODA0 PADA10A PADA10K CODA1 PADA20A PADA20K CODA2 PADA30A PADA30K CODA3 PADA40A PADA40K CODA4 PADA50A PADA50K CODA5 PADA60A PADA60K CODA6 PADA70A PADA70K CODA7 PADA80A PADA80K CODA8 PADA90A PADA90K CODA9 PADA100A PADA100K CODA10 PADA110A PADA110K CODA11 PADA120A PADA120K CODA12 PADA130A PADA130K CODA13 PADA140A PADA140K CODA14 PADA150A PADA150K CODA15 PAGND101 COGND1 PAGND201 COGND2 PAGND301 COGND3 PAGND401 COGND4 PAGND501 COGND5 PAGPIO001 COGPIO0 PAGPIO101 COGPIO1 PAHSLI0H01 COHSLI0H PAHSLI0L01 COHSLI0L PAIOH03 PAIOH04 PAIOH05 PAIOH06 PAIOH02 PAIOH01 PAIOH07 PAIOH08 PAIOH09 PAIOH010 COIOH PAIOL08 PAIOL07 PAIOL01 PAIOL02 PAIOL06 PAIOL05 PAIOL04 PAIOL03 COIOL PAJ002 PAJ001 COJ0 PAJ101 PAJ102 COJ1 PAJ202 PAJ201 COJ2 PAJ301 PAJ302 COJ3 PAJ402 PAJ401 COJ4 PAJ501 PAJ502 COJ5 PAJ602 PAJ601 COJ6 PAJ701 PAJ702 COJ7 PAJ802 PAJ801 COJ8 PAJ901 PAJ902 COJ9 PAJ1002 PAJ1001 COJ10 PAJ1101 PAJ1102 COJ11 PAJ1202 PAJ1201 COJ12 PAJ1301 PAJ1302 COJ13 PAJ1402 PAJ1401 COJ14 PAJ1501 PAJ1502 COJ15 PAJBUT01 PAJBUT02 COJBUT PAJVLED02 PAJVLED01 COJVLED COMK10 PANTC101 PANTC102 CONTC1 PAPOWER08 PAPOWER07 PAPOWER01 PAPOWER02 PAPOWER06 PAPOWER05 PAPOWER04 PAPOWER03 COPOWER PAR102 PAR101 COR1 PAR201 PAR202 COR2 PAR302 PAR301 COR3 PAR402 PAR401 COR4 PAR502 PAR501 COR5 PAU10EP PAU1020 PAU1019 PAU1018 PAU1017 PAU1016 PAU1015 PAU1014 PAU1013 PAU1012 PAU1010 PAU109 PAU108 PAU107 PAU106 PAU105 PAU104 PAU103 PAU102 PAU101 PAU1011 PAU1024 PAU1023 PAU1022 PAU1021 COU1 PAVDD01 COVDD PAVLED01 COVLED PAVS01 COVS PAVS0REV01 COVS0REV PA5V01 PAD20A PAD30A PAD50K PAPOWER04 PABUTTON02 PAIOL03 PAJBUT01 PAC401 PAIOH09 PAC701 PAIOH08 PABUTTON01 PAC101 PAC201 PAC301 PAC501 PAC601 PAGND101 PAGND201 PAGND301 PAGND401 PAGND501 PAJBUT02 PANTC101 PAPOWER02 PAPOWER03 PAR401 PAU1022 PAU10EP PAGPIO001 PAIOL01 PAU102 PAC502 PANTC102 PAR101 PAR501 PAU103 PAHSLI0H01 PAR201 PAR402 PAU1024 PAD10A PAHSLI0L01 PAIOL08 PAU1023 PAC202 PAR102 PAR202 PAU101 PAVDD01 PA5V0REV01 PAD50A PAC402 PAC702 PAD20K PAD40A PAD30K PAJVLED02 PAD60A PAVS0REV01 PADA00K PAJ002 PADA10K PAJ102 PADA20K PAJ202 PADA30K PAJ302 PADA40K PAJ402 PADA50K PAJ502 PADA60K PAJ602 PADA70K PAJ702 PADA80K PAJ802 PADA90K PAJ902 PADA100K PAJ1002 PADA110K PAJ1102 PADA120K PAJ1202 PADA130K PAJ1302 PADA140K PAJ1402 PADA150K PAJ1502 PAGPIO101 PAR502 PAR302 PAU104 PACOUT002 PAJ001 PAU105 PACOUT102 PAJ101 PAU106 PACOUT202 PAJ201 PAU107 PACOUT302 PAJ301 PAU108 PACOUT402 PAJ401 PAU109 PACOUT502 PAJ501 PAU1010 PACOUT602 PAJ601 PAU1011 PACOUT702 PAJ701 PAU1012 PACOUT802 PAJ801 PAU1013 PACOUT902 PAJ901 PAU1014 PACOUT1002 PAJ1001 PAU1015 PACOUT1102 PAJ1101 PAU1016 PACOUT1202 PAJ1201 PAU1017 PACOUT1302 PAJ1301 PAU1018 PACOUT1402 PAJ1401 PAU1019 PACOUT1502 PAJ1501 PAU1020 PAD10K PAIOL05 PAPOWER01 PAC102 PACOUT001 PACOUT101 PACOUT201 PACOUT301 PACOUT401 PACOUT501 PACOUT601 PACOUT701 PACOUT801 PACOUT901 PACOUT1001 PACOUT1101 PACOUT1201 PACOUT1301 PACOUT1401 PACOUT1501 PADA00A PADA10A PADA20A PADA30A PADA40A PADA50A PADA60A PADA70A PADA80A PADA90A PADA100A PADA110A PADA120A PADA130A PADA140A PADA150A PAJVLED01 PAR301 PAVLED01 PAC302 PAC602 PAD40K PAD60K PAU1021 PAVS01 Figure 10 PCB layout bottom TLD7002-16SHIELD User guide User guide 10 Rev.1.00 2022-07-26

6 Schematics

/13 /14 /15 /29 /23 /32 /14 /29 /45 /46 /34 /29 /23 /56 /57 /58 /59 /60 /2 /61 /62 /63 /4 /64 /60 /3 /0 /12 /65 /66 /3 /5 /7 /5 /6 /5 /5 /5 /67 /68 /59 /69/69 /70/70 /71/71 /72/72 /73 /74/74 /75/75 /76 /77 /61 /11 /10 /85 /86 /5 /63 /86 /67 /59 /69 /70 /71 /72 /73 /0 /3 /0 /67 /0 /5 /0 /6 /0 /7 /0 /8 /0 /9 /59/59 /59 /87 /69/69 /88/88 /70 /75 /71 /74 /72 /73 /76 /77 /80 /59/59 /69/69 /70/70 /71 /72/72 /73/73 /74/74 /75/75 /56 /57 /58 /62/62 /76 /66 /90/90 /7 /62 /7 /90/90 /9 /62 /65 /66 /3 /65 /66 /3 /90/90 /9 /62 /66/66 /2 /4 /103 /104 /105 /106 /81 /83 /79 /82 /83 /107 /2 /105 /108 /108 /81 /109 /110 /110 /105 /81 /103 /110 /81 /111 /108 /82 /112 /113 /81 /82 /110 /106 /104 /111 /81 /82 /83 /114 /108 /115 /116 /117 /118/117 /118 /58 /119/58 /119 /120 /58 /58/58 /58 /65 /79 /76 /77 /5 /80 /60 /61 /76 /121 /61 /80 /60 /61 /76 /121 /80 /120 /123/69 /59 /124 /123/124 /123 /118 /125 /118/125 /118/69 /70/70 /120 /118 /126 /58/71 /56 /127/56 /127 /125 /57 /87/69 /128 /129 /130 /87 /72 /128 /129 /130 /59 /73 /128 /129 /130 /59 /71 /59 /88 /128 /129 /130 /69 /74 /128 /129 /130 /59 /70 /59 /75 /128 /129 /130 /70 /75 /128 /129 /130 /59 /69 /59 /74 /128 /129 /130 /71 /88 /128 /129 /130 /59 /59 /59 /73 /128 /129 /130 /72 /59 /87 /128 /129 /130 /59 /87 /59 /72 /128 /129 /130 /73 /59 /59 /124 /123/124 /123 /118 /125 /124/125 /124/69 /71/71 /56 /127/56 /127 /125 /57 /59/70 /128 /129 /130 /88 /59 /71 /128 /129 /130 /74 /59 /69 /128 /129 /130 /75 /59 /70 /128 /129 /130 /59 /72 /131 /126/131 /126 /132 /132 /119 /57 /69 /87 /126 /127 /126 /127 /122 /5 /56 /57 /58 /117/69 /56 /57 /58 /120 /123 /120 /123 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58/120 /118 /126 /58/120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /120 /118 /126 /58 /134 /117 /119/117 /119 /132 /137/132 /137 /134 /117 /119/117 /119 /130 /137 /58 /59/58 /59 /138 /139 /123 /70 /87 /59 /87 /139 /140 /87 /70 /141 /80 /60 /61 /76 /121 /61 /120 /118 /126 /58 /56 /57 /58 /138 /129 /130/129 /130 /80 /60 /61 /76 /121 /61 /80 /60 /61 /76 /121 /80/124 /123/124 /123 /118 /125 /140/125 /140 /124 /124 /123/124 /123 /118 /125 /140/125 /140 /118 /132/59 /59 /87 /142 /59 /143 /87 /73 /87 /70 /57/130/117/59 /56 /57 /58 /117/72 /56 /57 /58 /65 /79 /76 /77 /5 /65 /79 /76 /77 /5 /65 /79 /76 /77 /67/56 /127/56 /127 /125 /128 /87 /56 /57 /58 /132 /70/132 /70 /71 /142 /74/142 /74 /59 /143 /87 /73 /87 /70 /77 /122 /85 /67 /77 /122 /85 /5 /77 /122 /85 /6 /77 /122 /85 /7 /77 /122 /85 /8 /77 /122 /85 /9 /77 /122 /85 /10 /77 /122 /85 /11 /77 /122 /85 /12 /77 /122 /85 /68 /77 /122 /85 /5 /5 /77 /122 /85 /5 /6 /77 /122 /85 /5 /7 /77 /122 /85 /5 /8 /77 /122 /85 /5 /9 /3 /0 /67 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /5 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /6 /3 /0 /7 /3 /0 /8 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /9 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /10 /3 /0 /11 /3 /0 /12 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /68 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /5 /67 /3 /0 /5 /5 /3 /0 /5 /6 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /5 /7 /89/85 /121 /89 /121 /80 /7 /67 /3 /0 /5 /8 /3 /0 /5 /9 /116 /117 /118/117 /118 /58 /119/58 /119 /120 /58 /58/58 /58 /120 /118 /126 /58 /56 /57 /58 /132/69 /71 /142 /74 /59 /143 /87 /73 /87 /70 /132/71 /56 /57 /58 /116 /117 /118/117 /118 /58 /119/58 /119 /120 /58 /58/58 /58 /58 /70/58 /70 /138 /139 /123 /70 /87 /59 /87 /139 /140 /87 /70 /141 /58 /69/58 /69 /138 /139 /123 /70 /87 /59 /87 /139 /140 /87 /70 /141/72 /120 /119 /139 /132 /58 /129 /125 /57 /128/132 /58 /129 /58 /71/58 /71 /138 /139 /123 /70 /87 /59 /87 /139 /140 /87 /70 /141 /56 /57 /58 /117/59 /117/73 /120 /118 /126 /58 /120 /118 /126 /58 /72 /120 /119 /132 /126/132 /126 /120 /120 /125 /57 /119 /139 /132 /58 /129 /56 /57 /58 /120 /123 /119 /132 /126/132 /126 /120 /117/70 /117 /71/117 /71 /71 /74 /87 /144 /135 /69 /72 /120 /87 /73 /87 /70 /117 /74/117 /74 /71 /74 /87 /144 /135/135 /69/69 /72 /120 /87 /73 /87 /70 /147 /102 /98 /99 /148/91/148/91 /92 /149/100 /98 /150 /94 /151 /150/101 /100 /102 /101 /150 /97/95/97/95 /96 /101 /102/101 /102 /96 /101 /99 /145 /67 /67 /63 /145 /5 /67 /63 /145 /6 /67 /63 /145 /8 /67 /63/63 /145 /7 /67 /63 /145/145/145 /11 /67 /63 /145/145/145 /68 /67 /63 /145 /62 /61 /4 /3 /67 /63 /56 /57 /58 /70 /56 /57 /58 /72 /120 /119 /139 /132 /58 /129 /125 /57 /128/132 /58 /129 /72 /120 /119 /139 /132 /58 /129 /125 /57 /128/132 /58 /129 /58 /72/58 /72 /138 /139 /123 /70 /87 /59 /87 /139 /140 /87 /70 /141 /58 /73/58 /73 /138 /139 /123 /70 /87 /59 /87 /139 /140 /87 /70 /141 /120 /123 /120 /123 /56 /127/56 /127 /125 /128 /59/132 /72/132 /72 /71 /142 /74/142 /74 /59 /143 /87 /73 /87 /70 /72 /120 /150 /94 /102 /148/152 /94 /101 /101 /97 /96 /56 /57 /58 /138 /129 /130/129 /130 /59 /69 /145 /1 /122 /85 /66 /77 /78 /79 /77 /79 /85 /60 /89 /121 /5 /67 /6 /121 /67 /12 /121 /65 /121 /60 /153 /154 /138 /129 /130/129 /130 /130 /128 /57 /117 /155/117 /155 /156 /156 /157 /144 /158 /159 /136 /127 /130 /123 /73 /70 /73 /123 /160 /69 /72 /135 /123 /116 /130 /132 /136 /118 /135 /123 Figure 11 TLD7002-16ES schematic TLD7002-16SHIELD User guide User guide 11 Rev.1.00 2022-07-26

[1] Arduino IDE downloads; https://www.arduino.cc/en/software [2] Infineon Developer Center Launcher ; https://www.infineon.com/cms/en/design-support/tools/utilities/ infineon-developer-center-idc-launcher/ [3] Infineon Developer Center; https://softwaretools.infineon.com/welcome? _ga=2.13126193.788892259.1654090253-547430173.1617093564 TLD7002-16SHIELD User guide References User guide 12 Rev.1.00 2022-07-26

Revision history

Rev.1.00 2022-07-26 • Initial release TLD7002-16SHIELD User guide User guide 13 Rev.1.00 2022-07-26

All referenced product or service names and trademarks are the property of their respective owners. Edition 2022-07-26 Published by Infineon Technologies AG

81726 Munich, Germany

© 2022 Infineon Technologies AG All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference IFX-eyp1657185166499 Important notice The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. Warnings Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.