DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
TL601, TL604, TL607, TL610 P-MOS ANALOG SWITCHES SLAS042 − D2161, JUNE 1976 — REVISED OCTOBER 1986 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Copyright 1986, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
- Switch ±10-V Analog Signals
- TTL Logic Capability
- 5-to 30-V Supply Ranges
- Low (100 Ω) On-State Resistance
- High (1011 Ω) Off-State Resistance
- 8-Pin Functions
description
The TL601, TL604, TL607, and TL610 are a family of monolithic P-MOS analog switches that provide fast switching speeds with high r off/ron ratio and no offset voltage. The p-channel enhancement-type MOS switches accept analog signals up to ±10 V and are controlled by TTL-compatible logic inputs. The monolithic structure is made possible by BI-MOS technology, which combines p-channel MOS with standard bipolar transistors. These switches are particularly useful in military, industrial, and commercial applications such as data acquisition, multiplexers, A/D and D/A converters, MODEMS, sample-and-hold systems, signal multiplexing, integrators, programmable operational amplifiers, programmable voltage regulators, crosspoint switching networks, logic interface, and many other analog systems. The TL601 is an SPDT switch with two logic control inputs. The TL604 is a dual complementary SPST switch with a single control input. The TL607 is an SPDT switch with one logic control input and one enable input. The TL610 is an SPST switch with three logic control inputs. The TL610 features a higher r off/ron ratio than the other members of the family. The TL601C, TL604C, TL607C, and TL610C are characterized for operation from 0°C to 70°C, the TL601I, TL604I, TL607I, and TL610I are characterized for operation from −25°C to 85°C, and theTL601M, TL604M, TL607M, and TL610M are characterized for operation over the full military temperature range of −55°C to 125°C. TYPICAL OF ALL SWITCHES TYPICAL OF ALL INPUTS VCC− VCC+ S S VCC− GND A B S V CC+ V CC− JG OR P PACKAGE (TOP VIEW) TL601 GND A V CC+ V CC− TL604 GND A ENABLE S VCC+ V CC− TL607 GND A B S V CC+ C S V CC− TL610 schematics of inputs and outputs
TL601, TL604, TL607, TL610 P-MOS ANALOG SWITCHES D2161, JUNE 1976 — REVISED OCTOBER 1986 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 logic symbols† and switch diagrams S26 S17 4S2 S1 3 TL604 X12A S2 4 3S1 7 S1 TL601 1/1S 4 B 3 A 2 S27 S16 FUNCTION TABLE FUNCTION TABLE INPUTS ANALOG SWITCHES INPUT ANALOG SWITCHES A B S1 S2 A S1 S2 L X Off (open) On (closed) H On (closed) Off (open) X L Off (open) On (closed) L Off (open) On (closed) H H On (closed) Off (open) 6 S S 4 6 S1 4S1 TL6106 S1 7 S2 S 4 S16 A 2 ENABLE 3 G3 3X1 TL607 FUNCTION TABLE FUNCTION TABLE INPUTS ANALOG SWITCHES INPUTS ANALOG SWITCHES A ENABLE S1 S2 A B C S X L Off (open) Off (open) L X X Off (open) L H Off (open) On (closed) X L X Off (open) H H On (closed) Off (open) X X L Off (open) X H H On (closed) † These symbols are in accordance with ANSI/IEEE Std 91-1984. TL607 logic diagram (positive logic) ENABLE 3 7 S2 S16
TL601, TL604, TL607, TL610 P-MOS ANALOG SWITCHES D2161, JUNE 1976 — REVISED OCTOBER 1986 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) NOTE 1: All voltage values are with respect to network ground terminal. recommended operating conditions TL601C, TL604C TL607C, TL610C TL601I, TL604I TL607I, TL610I TL601M, TL604M TL607M, TL610M UNIT MIN TYP MAX MIN TYP MAX MIN TYP MAX Supply voltage, VCC+ (see Figure 1) 5 10 25 5 10 25 5 10 25 V Supply voltage, VCC− (see Figure 1) −5 −20 −25 −5 −20 −25 −5 −20 −25 V VCC+ to VCC− supply voltage differential (see Figure 1) 15 30 15 30 15 30 V High-level control input voltage, VIH 2 5.5 2 5.5 2 5.5 V Low-level control input voltage, VIL All inputs 0.8 0.8 0.8 Voltage at any analog switch (S) terminal VCC− +8 VCC+ VCC− +8 VCC+ VCC− +8 VCC+ V Switch on-state current 10 10 10 mA Operating free-air temperature, TA 0 70 25 85 −55 125 °C
Ioff Switch off-state current ron Switch on-state resistance Ω ICC+ Supply current from VCC+ Logic input(s) at 5.5 V, All switch terminals open TL607 Logic input(s) at
5.5 V, All
ICC− Supply current from VCC− mA R L = 1 kΩ, CL = 35 pF, See Figure 2 ns TL601, TL604, TL607, TL610 P-MOS ANALOG SWITCHES D2161, JUNE 1976 — REVISED OCTOBER 1986 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended operating free-air temperature range, VCC+ = 10 V, VCC− = −20 V, analog switch test current = 1 mA (unless otherwise noted) PARAMETER TEST CONDITIONS † TL6 _ _ C TL6 _ _ M TL6 _ _ I UNIT MIN TYP ‡ MAX MIN TYP ‡ MAX IIH High-level input current VI = 5.5 V 0.5 10 0.5 10 µA IIL Low-level input current VI = 0.4 V −50 −250 −50 −250 µA VI(sw) = −10 V, TA = 25°C −500 −400 pA See Note 2 TA = MAX† −10 −20 −50 −100 nA VI(sw) = 10 V, IO(sw) = −1 mA TL601 TL604 TL607 75 200 55 100 TL610 40 100 40 80 VI(sw) = −10 V, IO(sw) = −1 mA TL601 TL604 TL607 220 600 220 400 TL610 120 300 120 300 roff Switch off-state resistance 20 20 G Ω C on Switch on-state input capacitanceVI(sw) = 0 V, f = 1 MHz 16 16 pF C off Switch off-state input capacitanceVI(sw) = 0 V, f = 1 MHz 8 8 pF TL601 TL604 5 10 5 10 ENABLE high 5 10 5 10 ENABLE low 3 5 3 5 TL610 5 10 5 10 TL601 TL604 ENABLE high −2.5 −5 −2.5 −5 ENABLE low † MAX is 70°C for C-suffix types, 85°C for I-suffix types, and 125°C for M-suffix types. ‡ All typical values are at TA= 25°C except for loff at TA= MAX. NOTE 2: The other terminal of the switch under test is at VCC+ = 10 V. switching characteristics, VCC+ = 10 V, VCC− = −20 V, TA = 25°C PARAMETER TEST CONDITIONS MIN TYP MAX UNIT toff Switch turn-off time 400 500 ton Switch turn-on time 100 150
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TL601CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL601IP OBSOLETE PDIP P 8 TBD Call TI Call TI TL604CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL607CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL610CP OBSOLETE PDIP P 8 TBD Call TI Call TI (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 30-Mar-2005 Addendum-Page 1
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and www.ti.com/communications Telecom DSP dsp.ti.com Computers and www.ti.com/computers Peripherals Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & www.ti.com/space-avionics-defense Defense RF/IF and ZigBee® Solutionswww.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated