TL33071

TL33071 TI1 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

/C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0065 /C0072/C0073/C0071/C0072/C0262/C0083/C0076/C0069/C0087/C0262/C0082/C0065/C0084/C0069/C0044 /C0083/C0073/C0078/C0071/C0076/C0069/C0262/C0083/C0085/C0080/C0080/C0076/C0089 /C0079/C0080/C0069/C0082/C0065/C0084/C0073/C0079/C0078/C0065/C0076 /C0065/C0077/C0080/C0076/C0073/C0070/C0073/C0069/C0082/C0083 SLOS097C − MARCH 1991 − REVISED AUGUST 1996 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 /C0068Wide Gain-Bandwidth Product. . . 4.5 MHz /C0068High Slew Rate. . . 13 V/µs /C0068Wide-Range Single-Supply Operation

4 V to 44 V

/C0068Wide Input Common-Mode Range Includes Ground (V CC− ) /C0068Low Total Harmonic Distortion. . . 0.02% /C0068Low Input Offset Voltage...3 m V Max (A Suffix) /C0068Large Output Voltage Swing −14.7 V to 14 V (With ±15-V Supplies) /C0068Large Capacitance Drive Capability 10,000 pF /C0068Excellent Phase Margin...6 0° /C0068Excellent Gain Margin. . . 12 dB /C0068Output Short-Circuit Protection OFSET N1 IN− IN+ VCC− /GND NC VCC+ OUT OFSET N2 D OR P PACKAGE (SINGLE, TOP VIEW) NC − No internal connection 1OUT 1IN− 1IN+ VCC− /GND VCC+ 2OUT 2IN− 2IN+ D OR P PACKAGE (DUAL, TOP VIEW) 1OUT 1IN− 1IN+ VCC+ 2IN+ 2IN− 2OUT NC 4OUT 4IN− 4IN+ VCC− /GND 3IN+ 3IN− 3OUT NC (QUAD, TOP VIEW) DW PACKAGE 1OUT 1IN− 1IN+ VCC+ 2IN+ 2IN− 2OUT 4OUT 4IN− 4IN+ VCC− /GND 3IN+ 3IN− 3OUT N PACKAGE (QUAD, TOP VIEW) AVAILABLE OPTIONS PACKAGE TA COMPLEXITY PLASTIC DIP SMALL OUTLINETA COMPLEXITY STANDARD GRADE PRIME GRADE STANDARD GRADE PRIME GRADE 0°C Single TL34071P TL34071AP TL34071D TL34071AD0 C to Single Dual TL34071P TL34072P TL34071AP TL34072AP TL34071D TL34072D TL34071AD TL34072ADto 70°C Dual Quad TL34072P TL34074N TL34072AP TL34074AN TL34072D TL34074DW TL34072AD TL34074ADW −40°C Single TL33071P TL33071AP TL33071D TL33071AD−40 C to Single Dual TL33071P TL33072P TL33071AP TL33072AP TL33071D TL33072D TL33071AD TL33072ADto 105°C Dual Quad TL33072P TL33074N TL33072AP TL33074AN TL33072D TL33074DW TL33072AD TL33074ADW −55°C Single TL35071P TL35071AP TL35071D TL35071AD−55 C to Single Dual TL35071P TL35072P TL35071AP TL35072AP TL35071D TL35072D TL35071AD TL35072ADto 125°C Dual Quad TL35072P TL35074N TL35072AP TL35074AN TL35072D TL35074DW TL35072AD TL35074ADW D and DW packages are available taped and reeled. Add R suffix to device type (e.g., TL34071ADR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0105/C0115 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 Copyright  1996, Texas Instruments Incorporated

/C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0065 /C0072/C0073/C0071/C0072/C0262/C0083/C0076/C0069/C0087/C0262/C0082/C0065/C0084/C0069/C0044 /C0083/C0073/C0078/C0071/C0076/C0069/C0262/C0083/C0085/C0080/C0080/C0076/C0089 /C0079/C0080/C0069/C0082/C0065/C0084/C0073/C0079/C0078/C0065/C0076 /C0065/C0077/C0080/C0076/C0073/C0070/C0073/C0069/C0082/C0083 SLOS097C − MARCH 1991 − REVISED AUGUST 1996

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443

description

Quality, low cost, bipolar fabrication with innovative design concepts are employed for the TL33071/2/4, TL34071/2/4, and TL35071/2/4 series of monolithic operational amplifiers. This series of operational amplifiers offers 4.5 MHz of gain bandwidth product, 13 V/µs slew rate, and fast settling time without the use of JFET device technology. Although this series can be operated from split supplies, it is particularly suited for single-supply operation since the common-mode input voltage range includes ground potential (V CC− ). With a Darlington transistor input stage, this series exhibits high input resistance, low input offset voltage, and high gain. The all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing, provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency output impedance, and symmetrical source/sink ac frequency response. The TL34071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified over the commercial (0°C to 70°C) temperature range. The TL33071/2/4 devices are available in standard or prime performance (A-suffix) grades and are specified over industrial/vehicular (−40°C to 105°C) temperature range. The TL35071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified over the military (−55°C to 125°C) temperature range. These low-cost amplifiers are available in single, dual, and quad configurations and are pin compatible with the MC33071/2/4, MC34071/2/4, and MC35071/2/4 series of amplifiers. Packaging options include standard plastic DIP and SO packages. symbol OFFSET N1 IN+ IN− OFFSET N2 OUT Single OUT IN+ IN− Dual and Quad (per amplifier)

/C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0065 /C0072/C0073/C0071/C0072/C0262/C0083/C0076/C0069/C0087/C0262/C0082/C0065/C0084/C0069/C0044 /C0083/C0073/C0078/C0071/C0076/C0069/C0262/C0083/C0085/C0080/C0080/C0076/C0089 /C0079/C0080/C0069/C0082/C0065/C0084/C0073/C0079/C0078/C0065/C0076 /C0065/C0077/C0080/C0076/C0073/C0070/C0073/C0069/C0082/C0083 SLOS097C − MARCH 1991 − REVISED AUGUST 1996 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC− . 2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows if input is brought below VCC− −0.3 V. 3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C DERATING FACTOR TA = 70°C TA = 105°C TA = 125°C PACKAGE TA ≤ 25C POWER RATING DERATING FACTOR ABOVE T A = 25°C TA = 70C POWER RATING TA = 105C POWER RATING TA = 125C POWER RATING D 725 mW 5.8 mW/°C 464 mW 261 mW 145 mWD DW 725 mW 1025 mW 5.8 mW/ C 8.2 mW/°C 464 mW 656 mW 261 mW 369 mW 145 mW 205 mWDW N P 1025 mW 1150 mW 1000 mW 8.2 mW/ C 9.2 mW/°C 8.0 mW/ C 656 mW 736 mW 640 mW 369 mW 414 mW 360 mW 205 mW 230 mW 200 mW N P 1150 mW 1000 mW 9.2 mW/ C 8.0 mW/°C 736 mW 640 mW 414 mW 360 mW 230 mW 200 mW recommended operating conditions TL3307x TL3407x TL3507x UNITMIN MAX MIN MAX MIN MAX UNIT Supply voltage, VCC ± ±2 ±22 ±2 ±22 ±2 ±22 V Common-mode input voltage, VIC VCC = 5 V 0 2.7 0 2.9 0 2.7 VCommon-mode input voltage, VIC VCC ± = ±15 V −15 12.7 −15 12.9 −15 12.7 V Operating free-air temperature, TA −40 105 0 70 −55 125 °C

/C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0065 /C0072/C0073/C0071/C0072/C0262/C0083/C0076/C0069/C0087/C0262/C0082/C0065/C0084/C0069/C0044 /C0083/C0073/C0078/C0071/C0076/C0069/C0262/C0083/C0085/C0080/C0080/C0076/C0089 /C0079/C0080/C0069/C0082/C0065/C0084/C0073/C0079/C0078/C0065/C0076 /C0065/C0077/C0080/C0076/C0073/C0070/C0073/C0069/C0082/C0083 SLOS097C − MARCH 1991 − REVISED AUGUST 1996

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA † TL3x07xA TL3x07x PARAMETER TEST CONDITIONS TA † MIN TYP ‡ MAX MIN TYP ‡ MAX UNIT VCC = 5 V 25°C 0.5 3 1.5 5 VIO Input offset voltage VCC = ±15 V 25°C 0.5 3 1.0 5 mVVIO Input offset voltage VCC = ±15 V Full range 5 7 mV αVIO Temperature coefficient of input offset voltage VIC = 0, V = 0, VCC = ±15 V Full range 10 10 µV/°C IIO Input offset current VIC = 0, VO = 0, R S = 50 Ω VCC = ±15 V 25°C 7 100 7 100 nAIIO Input offset current R S = 50 Ω VCC = ±15 V Full range 250 250 nA VCC = 5 V IIB Input bias current VCC = 5 V Full range −2.3 −2.3 AIIB Input bias current VCC = ±15 V VCC = ±15 V Full range −1.8 −1.8 VICR Common-mode input R S = 50 Ω 25°C −15 to 13.2 −15 to 13.2 VVICR Common-mode input voltage range R S = 50 Ω Full range −15 to 12.8 −15 to 12.8 V VOH High-level output voltage VCC+ = 5 V, VCC− = 0, R L = 2 kΩ 25°C 3.7 4 3.7 4 VVOH High-level output voltageR L = 10 kΩ 25°C 13.6 14 13.6 14 V R L = 2 kΩ Full range 13.4 13.4 VOL Low-level output voltage VCC+ = 5 V, VCC− = 0, R L = 2 kΩ 25°C 0.1 0.3 0.1 0.3 VVOL Low-level output voltageR L = 10 kΩ 25°C −14.7 −14.3 −14.7 −14.3 V R L = 2 kΩ Full range −13.5 −13.5 AVD Large-signal differentialVO = ±10 V, RL = 2 kΩ 25°C 50 100 25 100 V/mVAVD Large-signal differential voltage amplification VO = ±10 V, RL = 2 kΩ Full range 25 20 V/mV IOS Short-circuit output current Source: VID = 1 V, VO = 0 25°C −10 −30 −10 −30 mAIOS Short-circuit output currentSink: VID = −1 V, VO = 0 25°C 20 30 20 30 mA CMRR Common-mode VIC = VICRmin, 25°C 80 97 70 97 dBCMRR Common-mode rejection ratio VIC = VICRmin, R S = 50 Ω 25°C 80 97 70 97 dB kSVR Supply-voltage rejectionVCC ± = ±13.5 V 25°C 80 97 70 97 dBkSVR Supply-voltage rejection ratio (∆VCC ±/∆VIO) VCC ± = ±13.5 V to ±16.5 V, R S = 100 Ω 25°C 80 97 70 97 dB VO = 0, No Load 25°C 3.5 4.5 3.5 4.5 ICC Supply current VO = 0, No Load Full range 4.7 4.7 mAICC Supply current (per channel) VCC+ = 5 V, VCC− = 0, 25°C 3.4 4.4 3.4 4.4 mA(per channel) VO = 0, No Load Full range 4.6 4.6 † Full range is 0°C to 70°C for the TL3407x devices, and −40°C to 105°C for the TL3307x devices, and −55°C to 125°C for the TL3507x devices. ‡ All typical values are at TA = 25°C.

/C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0049/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0050/C0065/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0044 /C0084/C0076/C0051/C0120/C0048/C0055/C0052/C0065 /C0072/C0073/C0071/C0072/C0262/C0083/C0076/C0069/C0087/C0262/C0082/C0065/C0084/C0069/C0044 /C0083/C0073/C0078/C0071/C0076/C0069/C0262/C0083/C0085/C0080/C0080/C0076/C0089 /C0079/C0080/C0069/C0082/C0065/C0084/C0073/C0079/C0078/C0065/C0076 /C0065/C0077/C0080/C0076/C0073/C0070/C0073/C0069/C0082/C0083 SLOS097C − MARCH 1991 − REVISED AUGUST 1996 5POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443 operating characteristics, VCC ± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS TL3x07xA TL3x07x UNITPARAMETER TEST CONDITIONS MIN TYP MAX MIN TYP MAX UNIT SR+ Positive slew rate VI = −10 V to 10 V, AV = 1 8 10 8 10 V/ sSR− Negative slew rate VI = −10 V to 10 V, RL = 2 kΩ AV = −1 13 13 V/µs ts Settling time AVD = −1, 10-V step To 0.1% 1.1 1.1 sts Settling time A VD = −1, 10-V stepTo 0.01% 2.2 2.2 µs Vn Equivalent input noise voltagef = 1 kHz, R S = 100 Ω 32 32 nV/√Hz In Equivalent input noise currentf = 1 kHz 0.22 0.22 pA/√Hz THD Total harmonic distortion VO = 2 V to 20 V, RL = 2 kΩ, 0.02 0.02 %THD Total harmonic distortion AVD = 10, f = 10 kHz 0.02 0.02 % GBW Gain-bandwidth product f =100 kHz 3.5 4.5 3.5 4.5 MHz BW Power bandwidth R L = 2 kΩ, VO(PP) = 20 V, 200 200 kHzBW Power bandwidth R L = 2 kΩ, AVD = 1, VO(PP) = 20 V, THD = 5.0% 200 200 kHz φm Phase margin R L = 2 kΩ, C L = 0 60° 60° φm Phase margin R L = 2 kΩ, C L = 300 pF 40° 40° Gain margin R L = 2 kΩ, C L = 0 12 12 dBGain margin R L = 2 kΩ, C L = 300 pF 4 4 dB ri Differential input resistanceVIC = 0 150 150 M Ω C i Input capacitance VIC = 0 2.5 2.5 pF Channel separation f = 10 kHZ 120 120 dB zo Open-loop output impedance f = 1 MHZ 30 30 Ω

(TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for

applications

design. Customers are responsible for their products and components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Clocks and Timers www.ti.com/clocks Digital Control www.ti.com/digitalcontrol Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony RF/IF and ZigBee Solutions www.ti.com/lprf Video Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright 2008, Texas Instruments Incorporated