TL30BGYRXXAC1

TL30 BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

30 mm Multi-Color General-Purpose or Audible Indicators StandardAudible

• Rugged, affordable, and easy-to-install multi-segment indicators
• Compact 30 mm diameter
• Illuminated segments provide easy-to-see operator guidance and indication of equipment status
• Uniform indicator segments appear gray when off to eliminate false indication from ambient light
• Models with 2, 3, 4, and 5 color segments plus audible
• 12 V dc to 30 V dc operation
• No assembly required, mounting nut and gasket supplied Models Housing TL30 Connection C1 = 1.2 m (3.9 ft) Integral PVC Cable QD = Integral 5-, or 8-pin M12/Euro-style quick disconnect QD Models with quick disconnect require a mating cordset *Position 1 and 2 can not be X = No Segment Style B = Basic B G Y R Color Position 1* 2* 3 4 5 G = Green Y = Yellow R = Red B = Blue W = White X = No Segment XX Audible Alarm N = None A = Audible N Housing Color X = Black X Wiring Diagrams Note: All models are bimodal and can be wired as PNP or NPN devices. TL30 Basic Tower Light Original Document 206089 Rev. C

2 January 2019

1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray C1 = Color 1 C2 = Color 2 C3 = Color 3 C4 = Color 4 A = Audible Pin 5 (Gray wire) activates the corresponding color or the audible function, if available. 2 and 3 segment models only require associated wires to be connected. 8-Pin / 7-Wire Models 12-30V dc or C5 4 A 8 Key 1 = White 2 = Brown 3 = Green (Not Used) 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red C1 = Color 1 C2 = Color 2 C3 = Color 3 C4 = Color 4 C5 = Color 5 A = Audible Green wire not used. Specifications Supply Voltage and Current

12 V dc to 30 V dc

Maximum current per LED segment: 40 mA Omni-Directional Sealed Audible Alarm: 20 mA maximum current Supply Protection Circuitry Protected against transient voltages Input Leakage Current Immunity 400 µA1 Audible Alarm Omni-Directional Sealed Audible Alarm: 2.8 kHz ± 500 Hz oscillation frequency, maximum intensity 90 dB at 1 m (3.3 ft) (typical) Operating Conditions 90% maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) Environmental Rating All Models: IEC IP65 UL Type 4X when mounted in a suitable enclosure Non-Audible: UL Type 13 when mounted in a suitable enclosure Indicators LEDS are independently selected; 2 to 5 colors depending on model Indicator Response Time Indicator On/Off: 1 millisecond maximum Indicator Characteristics Color Dominant Wavelength (nm) or Color Temperature (CCT) Color Coordinates2 Lumen Output (Typical at 25 °C)x y Green 524 nm 0.160 0.708 7.5 Red 620 nm 0.690 0.308 2.5 Yellow 592 nm 0.582 0.413 6.5 Blue 468 nm 0.136 0.062 2.0 White 5500K 0.332 0.360 7.5 1 Any current above this value may activate the TL30. 2 Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. TL30 Basic Tower Light 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 206089 Rev. C

Base, Segments and Audible: UV stabilized polycarbonate Grommet: TPV Mounting Nut: PBT Sealing Gasket: PVC/NBR/CR Mounting M22 × 1.5 threaded base, maximum torque 2.25 N·m (20 in·lbf) Mounting nut and sealing gasket included Connections Integral 5-pin, or 8-pin M12/Euro-style quick disconnect, or 1.2 m (3.9 ft) integral PVC cable, depending on model Models with a quick disconnect require a mating cordset Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) IK07 (EN 60068-2-75 with SMBAMS22RA bracket) Certifications Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Dimensions 18.0[0.71] 13.0[0.51] H3 x 20.0[0.79] M22 x 1.5 M12 x 1 # of colors Tower Height (H) Non-Audible Omni-Directional Sealed Audible 2 99.7 mm (3.9 in) 145.6 mm (5.7 in) 3 126.7 mm (5.0 in) 172.6 mm (6.8 in) 4 153.7 mm (6.0 in) 199.6 mm (7.9 in) 5 180.7 mm (7.1 in) 226.6 mm (8.9 in) All measurements are listed in millimeters [inches], unless noted otherwise. Accessories Cordsets 5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.50 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) TL30 Basic Tower Light P/N 206089 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 3

5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-506RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 4.57 m (15 ft) MQDC1-530RA 9.14 m (30 ft) 8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield Model Length Style Dimensions Pinout (Female) MQDC2S-806 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red MQDC2S-815 4.57 m (15 ft) MQDC2S-830 9.14 m (30 ft) MQDC2S-850 15.2 m (50 ft) MQDC2S-806RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC2S-815RA 4.57 m (15 ft) MQDC2S-830RA 9.14 m (30 ft) MQDC2S-850RA 15.2 m (50 ft) Brackets SMB22A

• Right-angle bracket with curved slot for versatile orientation
• 12-ga. stainless steel
• Mounting hole for 22 mm sensor 46 AB C Hole center spacing: A to B = 26.0 Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2 SMB22FVK
• V-clamp, flat bracket and fasteners for mounting to pipe or extensions
• Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions
• 22 mm hole for mounting sensor 46 118 34Aø22.5 Hole size: A = ø 22.5 SMB22RAVK
• V-clamp, right-angle bracket and fasteners for mounting to pipe or extensions
• Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions
• 22 mm hole for mounting sensor A Hole size: A = ø 22.5 SMBAMS22P
• Flat SMBAMS series bracket with 22 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. (2.6 mm) cold-rolled steel 93 A C B Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 TL30 Basic Tower Light 4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 206089 Rev. C

• Right-angle SMBAMS series bracket with 22 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. (2.6 mm) cold-rolled steel A C B Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 LMBE12RA35
• Direct mounting of stand-off pipe, with common bracket type
• Zinc-plated steel
• 1/2-14 NPSM nut
• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm Hole center spacing: 20.0 38.25 2X Ø9 1/2 - 14 NPSM NUT 5535 LMBE12RA45
• Direct mounting of stand-off pipe, with common bracket type
• Zinc-plated steel
• 1/2-14 NPSM nut
• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm Hole center spacing: 35.0 38.25 6545 2X Ø11 1/2 - 14 NPSM NUT LMB Sealed Right-Angle Bracket Model Description Construction LMBE12RA Pipe-Mount Models: Bracket kit with base, ½-14 pipe adapter, set screw, fasteners, O-rings, and gaskets. For use with stand-off pipe (listed and sold separately). Black polycarbonate Elevated Mount System Model Features Components SA-M22E12 - Black Polycarbonate
• Streamlined black polycarbonate stand-off pipe adapter/cover
• Connects between 22 mm light base and ½ in. NPSM/DN15 pipe Polished 304 Stainless Steel Black Anodized Aluminum Clear Anodized Aluminum
• Elevated-use stand-off pipe (½ in. NPSM/DN15)
• Polished 304 stainless steel, black anodized aluminum, or clear anodized aluminum surface
• ½ in. NPT thread at both ends
• Compatible with most industrial environments SOP-E12-150SS 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long SOP-E12-300SS 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E12-900SS 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-E12M30 - Black Acetal
• Streamlined black acetal mounting base adapter/ cover
• Connects between ½ in. NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole
• Mounting hardware included TL30 Basic Tower Light P/N 206089 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 5

Model Features Construction SA-F12

• Elevated-use stand-off pipes (½ in, NPSM/DN15)
• M5 mounting hardware and nitrile gasket included Die-cast zinc base with black paint 10 ø28ø70 1/2-14 NPSM 4x ø5.554 SA-F12-3
• Elevated-use stand-off pipes (½ in, NPSM/DN15)
• M4 mounting hardware and nitrile blend gasket included Black Polycarbonate 298.77 ø60 ø402 x 120°1/2-14 NPSM Foldable Mounting Bracket Foldable Mounting Brackets Model Features Construction SA-FFB12 • For use with 1/2 inch stand-off pipes
• Stainless steel hardware Black polycarbonate 111 110° 1/2-14 NPSM 4 x Ø5Ø70 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. TL30 Basic Tower Light © Banner Engineering Corp. All rights reserved