TL62-50 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Prevent corrosion • Shock and vibration resistant
  • Fluorescence • Fast setting

3M ™ Scotch-Weld™ Threadlocker Anaerobic Adhesives TL22 • TL42 • TL43 • TL62 • TL71 • TL72 • TL77 • TL90 1 Brookfield RVT #3 spindle @ 20 rpm and 25°C. 2 Brookfield RVT #2 spindle @ 20 rpm and 25°C. 3 Brookfield RVT #4 spindle @ 20 rpm and 25°C. 4 Brookfield LVF #1 spindle @ 30 rpm and 25°C. - 2 - Typical Uncured Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Scotch-Weld™ Threadlocker Anaerobic Adhesives TL22 TL42 TL43 TL62 TL71 TL72 TL77 TL90 Color Purple Blue Blue Red Red Red Red Green Strength Low Medium Medium - Medium - High High High Medium, High High Wicking Grade Chemistry Type Dimethacrylate Dimethacrylate Dimethacrylate Dimethacrylate Dimethacrylate Dimethacrylate Dimethacrylate Dimethacrylate Appearance Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Viscosity (cps) 800 - 800 - 2,500 - 800 - 400 - 600 2 4,000 - 6,000 - 10 - 30 4 1,6001 1,6002 4,0001 1,6002 15,0003 8,0003 Fixture Time (min) ≤ 20 ≤ 20 ≤ 20 ≤ 20 ≤ 20 ≤ 20 ≤ 20 ≤ 20 Fixture Time with < 5 < 5 < 5 < 5 < 5 < 5 < 5 < 5 Activator (min) Full Cure Time (hr) 24 24 24 24 24 24 24 24 5 Reference ISO 10964. 6 To convert to N.m divide in.lbs value by 8.851. Typical Cured Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Scotch-Weld™ Threadlocker Anaerobic Adhesives TL22 TL42 TL43 TL62 TL71 TL72 TL77 TL90 Color Purple Blue Blue Red Red Red Red Green Strength Low Medium Medium - Medium - High High High Medium, High High Wicking Grade Fastener Size Range < 5/16" 1/4"- 3/4" 1/2"- 1" 1/2"- 1" 1/2"- 1" 1/2"- 1" Up to 1 1/2" Up to 1/2" Breakaway Torque 40 - 100 70 - 160 110 - 220 180 - 290 180 - 410 180 - 330 220 - 350 60 - 190 Range (in.lbs)5,6 Prevail Torque Range 10 - 40 20 - 90 40 - 130 180 - 300 180 - 410 130 - 350 220 - 350 220 - 390 (in.lbs)5,6 Temperature Range (°F)-65 to 300 -65 to 300 -65 to 300 -65 to 300 -65 to 300 -65 to 450 -65 to 300 -65 to 300

3M ™ Scotch-Weld™ Threadlocker Anaerobic Adhesives TL22 • TL42 • TL43 • TL62 • TL71 • TL72 • TL77 • TL90 - 3 - Directions for Use 3M™ Scotch-Weld™ Threadlocker Anaerobic Adhesives are not recommended for use on most plastics due to potential cracking of plastic parts. Also, they are not recommended for use in piping systems that contain pure oxygen or an oxygen-rich environment, chlorine, or strong oxidizing substances. For Assembly 1. Ensure parts are clean, dry and free from oil, grease and dirt. For best results, clean and dry parts with solvent or 3M™ Scotch-Weld™ Activator. (Activator can also be used on inactive surfaces or to accelerate the cure on active surfaces.) 2. If not sure of surface type, always use activator. Refer to Material Surface Activity and Cure Speed section for more information. 3. Shake the adhesive bottle well before use. 4. Avoid touching the metal surfaces with the bottle tip since the metal ions may react with the adhesive upon contact and eventually may clog the bottle tip. 5. Apply adhesive onto the threaded part where the contact area will be in the final assembly. For larger parts, use more adhesive and rotate the threaded part to spread adhesive evenly around contact area. 6. For through holes, apply several drops of adhesive onto the bolt at the nut engagement area. For blind holes, apply several drops of the adhesive down the internal threads to the bottom of the hole. 7. Assemble the nut/fastener and tighten as required. 8. Allow assemblies to set for sufficient time so that handling strength or full cure will occur before further processing or testing. For Disassembly 1. Loosen or remove with regular hand tools. 2. If hand tools do not work due to the assembled parts being well tightened, apply localized heat (approximately 490°F) to the nut or bolt and disassemble while parts are still hot. Use extreme caution when working with heat sources (e.g. heat gun, flames, etc. Handling Information Active (Fast) Inactive (Slow)Material Surface Activity and Cure Speed

  • Brass
  • Bronze
  • Commercial aluminum
  • Copper
  • Iron
  • K o v a r
  • Manganese
  • Monel
  • Nickel
  • Anodized aluminum
  • Cadmium
  • Chemical black oxide
  • Galvanized steel
  • Gold
  • Inconel
  • Magnesium
  • Magnetite steel
  • Plated parts
  • Pure aluminum
  • Silver
  • Stainless steel
  • Z i n c

3M ™ Scotch-Weld™ Threadlocker Anaerobic Adhesives TL22 • TL42 • TL43 • TL62 • TL71 • TL72 • TL77 • TL90 - 4 - Storage Store product in cool, dry area out of direct sunlight. Military Specification S-46163A 3M™ Scotch-Weld™ Threadlocker Anaerobic Adhesives TL22, TL42, TL62, TL71, TL72, TL77, and TL90 have been tested and passed the requirements of MIL-S-46163A. Shelf Life 3M™ Scotch-Weld™ Threadlocker Anaerobic Adhesives have a shelf life of twelve months when stored at 60° to 80°F (16° to 27°C) in the original unopened container. Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501. Precautionary Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Technical Information Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Warranty, Limited Remedy, and Disclaimer Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Limitation of Liability This product was manufactured under a quality system registered to ISO 9001:2000 standards. ISO 9001:2000 Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Product Use 3M and Scotch-Weld are trademarks of 3M Company. Kovar is a registered trademark of Carpenter Tech Corp. Monel is a registered trademark of Special Metals Corporation. Inconel is a registered trademark of INCO. Printed in U.S.A. ©3M 2010 78-9236-7148-7 (3/10) Recycled Paper 40% pre-consumer 10% post-consumer Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/industrial