TL081ACP

TL080 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

TL080, TL081, TL082, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B, TL082Y, TL084Y JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 Copyright  1992, Texas Instruments Incorporated

24 DEVICES COVER COMMERCIAL, INDUSTRIAL, AND MILITARY TEMPERATURE RANGES

• Low-Power Consumption
• Wide Common-Mode and Differential Voltage Ranges
• Low Input Bias and Offset Currents
• Output Short-Circuit Protection
• Low Total Harmonic Distortion . . . 0.003% Typ
• High Input Impedance . . . JFET-Input Stage
• Internal Frequency Compensation (Except TL080, TL080A)
• Latch-Up-Free Operation
• High Slew Rate . . . 13 V/µs Typ
• Common-Mode Input Voltage Range Includes VCC+ NC–No internal connection

1 OUT

1 IN–

1 IN+

2 IN+

2 IN–

2 OUT

4 OUT

4 IN–

4 IN+

V CC–

3 IN+

3 IN–

3 OUT

TL084, TL084A, TL084B D, J, N, OR PW PACKAGE (TOP VIEW) 3212 0 1 9 91 0 1 1 1 2 1 3 VCC– NC V CC+ NC TL084M ...F K PACKAGE (TOP VIEW) IN– NC IN+ NC TL081M . . . FK PACKAGE (TOP VIEW) NC OFFSET N1 NC OFFSET N2 NC NC NC NC NC 3 2 1 20 19 91 0 1 1 1 2 1 3 NC TL082M ...F K PACKAGE (TOP VIEW)NC IN– IN+ VCC– COMP V CC+ OUT OFFSET N2 TL080 D, P, OR PW PACKAGE (TOP VIEW) OFFSET N1 IN– IN+ VCC– NC V CC+ OUT OFFSET N2 TL081, TL081A, TL081B D, JG, P, OR PW PACKAGE (TOP VIEW) VCC– VCC+ TL082, TL082A, TL082B D, JG, P, OR PW PACKAGE (TOP VIEW) VCC– VCC+ VCC– PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-STD-883, Class B, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

TL080, TL081, TL082, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B, TL082Y, TL084Y JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 symbols N1/COMP COMP IN+ IN– OFFSET N2 OUT TL080 OFFSET N1 IN+ IN– OUT IN+ IN– OUT TL082 (each amplifier) TL084 (each amplifier) TL081 OFFSET N2

description

The TL08_ JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient. Offset adjustment and external compensation options are available within the TL08_ family. Device types with a C suffix are characterized for operation from 0°C to 70°C, those with an I suffix are characterized for operation from –40°C to 85°C, and those with an M suffix are characterized for operation over the full military temperature range of –55°C to 125°C. AVAILABLE OPTIONS T VIO PACKAGE CHIP TA IO MAX at 25°C SMALL OUTLINE (D008) SMALL OUTLINE (D014) CHIP CARRIER (FK) CERAMIC DIP (J) CERAMIC DIP (JG) PLASTIC DIP (N) PLASTIC DIP (P) TSSOP (PW) CHIP FORM (Y) 0°C 15 mV 15 mV 6 mV 3 mV TL080CD TL081CD TL081ACD TL081BCD TL080CP TL081CP TL081ACP TL081BCP TL080CPW TL081CPW 0°C to 70°C 15 mV 6 mV 3 mV TL082CD TL082ACD TL082BCD TL082CP TL082ACP TL082BCP TL082CPW TL082Y 15 mV 6 mV 3 mV TL084CD TL084ACD TL084BCD — — — TL084CN TL084ACN TL084BCN TL084CPW TL084Y –40°C to 85°C 6 mV 6 mV 6 mV TL081ID TL082ID TL084ID TL084ID — — — TL084IN TL081IP TL082IP — — –55°C to 125°C 6 mV 6 mV 9 mV — — TL081MFK TL082MFK TL084MFK TL084MJ TL081MJG TL082MJG — — — — The D package is available taped and reeled. Add R suffix to device type, (e.g., TL080CDR).

TL080, TL081, TL082, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 schematic (each amplifier) VCC+ IN+ OFFSET N2 COMP VCC– OFFSET N1 1080 Ω 1080 Ω N1/COMP IN– TL081 Only 64 Ω 128 Ω 64 Ω OUT Only TL080 C1 = 18 pF on TL081, TL082, and TL084 only (including their suffix versions). Component values shown are nominal. OFFSET N2

JFET-INPUT DUAL OPERATIONAL AMPLIFIER SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 chip information These chips, when properly assembled, display characteristics similar to the TL082. Thermal compression or ultrasonic bonding may be used on the doped aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 × 4 MINIMUM TJmax = 150°C TOLERANCES ARE ± 10% ALL DIMENSIONS ARE IN MILS PIN (4) INTERNALLY CONNECTED TO BACKSIDE OF CHIP (8) (6) (3) (2) (5) (1) +(7) 2 IN+ (4) VCC–

JFET-INPUT QUAD OPERATIONAL AMPLIFIER SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 chip information These chips, when properly assembled, display characteristics similar to the TL084. Thermal compression or ultrasonic bonding may be used on the doped aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 × 4 MINIMUM TJmax = 150°C TOLERANCES ARE ± 10% ALL DIMENSIONS ARE IN MILS PIN (11) INTERNALLY CONNECTED TO BACKSIDE OF CHIP (4) (6) (3) (2) (5) (1) +(7) 2 IN+ (11) VCC– (13) (10) (9) (12) (8) +(14)

TL080, TL081, TL082, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) TL08_C TL08_AC TL08_BC TL08_I TL08_M UNIT Supply voltage, VCC+ (see Note 1) 18 18 18 V Supply voltage VCC – (see Note 1) –18 –18 –18 V Differential input voltage (see Note 2) ± 30 ± 30 ± 30 V Input voltage (see Notes 1 and 3) ± 15 ± 15 ± 15 V Duration of output short circuit (see Note 4) unlimited unlimited unlimited Continuous total dissipation See Dissipation Rating Table Operating free-air temperature range 0 to 70 – 40 to 85 – 55 to 125 °C Storage temperature range – 65 to 150 – 65 to 150 – 65 to 150 °C Case temperature for 60 seconds FK package 260 °C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or JG package 300 °C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D, N, P, or PW package 260 260 °C NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC– . 2. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR DERATE ABOVE T A TA = 70°C POWER RATING TA = 85°C POWER RATING TA = 125°C POWER RATING D (8 Pin) 680 mW 5.8 mW/°C 32°C 464 mW 377 mW N/A D (14 Pin) 680 mW 7.6 mW/°C 60°C 608 mW 494 mW N/A FK 680 mW 11.0 mW/ °C8 8 °C 680 mW 680 mW 275 mW J 680 mW 11.0 mW/ °C8 8 °C 680 mW 680 mW 275 mW JG 680 mW 8.4 mW/ °C6 9 °C 672 mW 546 mW 210 mW N 680 mW 9.2 mW/ °C7 6 °C 680 mW 598 mW N/A P 680 mW 8.0 mW/°C 65°C 640 mW 520 mW N/A PW (8 Pin) 525 mW 4.2 mW/°C 25°C 336 mW N/A N/A PW (14 Pin) 700 mW 5.6 mW/°C 25°C 448 mW N/A N/A

TL080, TL081, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 1443 HOUSTON, TEXAS 77001POST OFFICE BOX 655303 DALLAS, TEXAS 75265•• 7 electrical characteristics, VCC ± = ±15 V (unless otherwise noted) PARAMETER TEST CONDITIONS † TL080C TL081C TL082C TL084C TL081AC TL082AC TL084AC TLO81BC TL082BC TL084BC TL081I TL082I TL084I UNIT MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX VIO Input offset voltage VO = 0, TA = 25°C 3 15 3 6 2 3 3 6 mVVIO Input offset voltage R S = 50 Ω TA = full range 20 7.5 5 9 mV α VIO Temperature coefficient of input offset voltage VO = 0, TA = full range R S = 50 Ω , 18 18 18 18 µV/°C IIO Input offset current‡ VO =0 TA = 25°C 5 200 5 100 5 100 5 100 pAIIO Input offset current‡ VO = 0 TA = full range 2 2 2 10 nA IIB Input bias current‡ VO =0 TA = 25°C 30 400 30 200 30 200 30 200 pAIIB Input bias current‡ VO = 0 TA = full range 10 7 7 20 nA VICR Common-mode input voltage range TA = 25°C ± 11 –12 to ± 11 –12 to ± 11 –12 to ± 11 –12 to V V Maximum peak TA = 25°C R L = 10 kΩ ± 12 ± 13.5 ± 12 ± 13.5 ± 12 ± 13.5 ± 12 ± 13.5 VVOM M aximum pea k output voltage swing TA = full rangeR L ≥ 10 kΩ ± 12 ± 12 ± 12 ± 12 VOM output voltage swing TA = full range R L ≥ 2 kΩ ± 10 ± 12 ± 10 ± 12 ± 10 ± 12 ± 10 ± 12 AVD Large-signal differential VO = ± 10 V, TA = 25°C R L ≥ 2 kΩ, 25 200 50 200 50 200 50 200 V/mVAVD gg voltage amplification VO = ± 10 V, TA = full range R L ≥ 2 kΩ , 15 25 25 25 V/mV B1 Unity-gain bandwidth TA = 25°C 3 3 3 3 MHz ri Input resistance TA = 25°C 1012 1012 1012 1012 Ω CMRR Common-mode VIC = VICR min, VO = 0, 70 86 80 86 80 86 80 86 dBCMRR rejection ratio R S = 50 Ω , TA = 25°C 70 86 80 86 80 86 80 86 dB kSVR Supply voltage rejectionVCC = ± 15 V to ± 9 V, VO = 0, 70 86 80 86 80 86 80 86 dBkSVR pp y g j ratio (Δ VCC ± /Δ VIO) R S = 50 Ω , TA = 25°C 70 86 80 86 80 86 80 86 dB ICC Supply current (per amplifier) No load, TA = 25°C V01/V02 Crosstalk attenuation AVD = 100, TA = 25°C 120 120 120 120 dB † All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is 0°C to 70°C for TL08_C, TL08_AC, TL08_BC and –40°C to 85°C for TL08_I. ‡ Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive as shown in Figure 18. Pulse techniques must be used that will maintain the junction temperature as close to the ambient temperature as possible.

† All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Figure 18. Pulse techniques must be used that will maintain the junction temperatures as close to the ambient temperature as is possible. ∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.

† All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Figure 18. Pulse techniques must be used that will maintain the junction temperature as close to the ambient temperature as possible.

TL080, TL081, TL082, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77001 TYPICAL CHARACTERISTICS † |VCC ± | – Supply Voltage – V ± 15 2 4 6 8 10 12 14 ± 2.5 ± 5 ± 7.5 ± 10 ± 12.5 R L = 10 kΩ TA = 25°C 0.1 R L – Load Resistance – kΩ ± 15 ± 2.5 ± 5 ± 7.5 ± 10 ± 12.5 VCC ± = ± 15 V TA = 25°C See Figure 2 0.2 0.4 0.7 1 2 4 7 MAXIMUM PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE MAXIMUM PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE – Maximum Peak Output Voltage – VVOM – Maximum Peak Output Voltage – VVOM Figure 10 Figure 11 180° 135° 90° 45° 700 –75 TA – Free-Air Temperature – °C 125 1000 –50 –25 0 25 50 75 100 100 200 400 VCC ± = ± 15 V VO = ± 10 V R L = 2 kΩ Phase Shift (right scale) TA = 25°C R L = 10 kΩ VCC ± = ± 5 V to ± 15 V Differential Voltage Amplification (left scale) 105 104 103 102 101

1 M100 k10 k1 k10010

f – Frequency – Hz LARGE-SIGNAL ‡ DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY – Differential Voltage Amplification – V/mVA VD Phase Shift – Differential Voltage Amplification – V/mVA VD Figure 12 Figure 13 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. A 12-pF compensation capacitor is used with TL080. ‡ The temperature range of the C version is 0°C to 75°C, the I version is –40°C to 85°C, and the M version is –55°C to 125°C.

TL080, TL081, TL082, TL084, TL081A, TL082A, TL084A TL081B, TL082B, TL084B JFET-INPUT OPERATIONAL AMPLIFIERS SLOS081A–D2297, FEBRUARY 1977–REVISED NOVEMBER 1992 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77001 TYPICAL CHARACTERISTICS † –75 – Total Power Dissipated – mW TA – Free-Air Temperature – °C 125 250 –50 –25 0 25 50 75 100 100 125 150 175 200

225 VCC ± = ± 15 V

TL084, TL085 TL082, TL083 TL080, TL081 See Figure 3 TA = 25°C C2 = 3 pF VCC ± = ± 15 V 105 104 103 102

1 M100 k10 k1 k

f – Frequency – Hz 100 TL080 DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY WITH FEED-FORWARD COMPENSATION TOTAL POWER DISSIPATED ‡ vs FREE-AIR TEMPERATURE – Differential Voltage Amplification – V/mVA VD PD Figure 14 Figure 15 – Supply Current – mA |VCC ± | – Supply Voltage – V 2.0 2 4 6 8 10 12 14 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6

1.8 TA = 25°C

–75 TA – Free-Air Temperature –°C 125 2.0 –50 –25 0 25 50 75 100 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6

1.8 VCC ± = ± 15 V

SUPPLY CURRENT PER AMPLIFIER ‡ vs FREE-AIR TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE ICC ± – Supply Current – mAICC ± Figure 16 Figure 17 † Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. A 12-pF compensation capacitor is used with TL080. ‡ The temperature range of the C version is 0°C to 75°C, the I version is –40°C to 85°C, and the M version is –55°C to 125°C.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 POST OFFICE BOX 1443 • HOUSTON, TEXAS 77001

Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI products in such applications requires the written approval of an appropriate TI officer. Questions concerning potential risk applications should be directed to TI through a local SC sales office. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. Copyright  1995, Texas Instruments Incorporated