TL071A

TL071_01 STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

■ WIDE COMMON-MODE (UP TO V CC +) AND DIFFERENTIAL VOLTAGE RANGE ■ LOW INPUT BIAS AND OFFSET CURRENT ■ LOW NOISE e n = 15nV/√Hz (typ) ■ OUTPUT SHORT-CIRCUIT PROTECTION ■ HIGH INPUT IMPEDANCE J–FET INPUT STAGE ■ LOW HARMONIC DISTORTION : 0.01% (typ) ■ INTERNAL FREQUENCY COMPENSATION ■ LATCH UP FREE OPERATION ■ HIGH SLEW RATE : 16V/µs (typ)

DESCRIPTION

The TL071, TL071A and TL071B are high speed J–FET input single operational amplifiers incorpo- rating well matched, high voltage J–FET and bipo- lar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset voltage temper- ature coefficient. ORDER CODE N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT) PIN CONNECTIONS (top view) Part Number Temperature Range Package ND TL071M/AM/BM -55°C, +125°C •• TL071I/AI/BI -40°C, +105°C •• TL071C/AC/BC 0°C, +70°C •• Example : TL071CN N DIP8 (Plastic Package) D SO8 (Plastic Micropackage) 1 - Offset null 1 2 - Inverting input 3 - Non-inverting input 4 - V CC 5 - Offset null 2 6 - Output 7 - VCC 8 - N.C. TL071 TL071A - TL071B LOW NOISE J-FET SINGLE OPERATIONAL AMPLIFIERS March 2001

INPUT OFFSET VOLTAGE NULL CIRCUIT ABSOLUTE MAXIMUM RATINGS Output Non-inverting input Inverting input V CC V CC 100 Ω 1.3k 30k 35k 35k 100 Ω1.3k 8.2k Offset Null1 Offset Null2 100 Ω 200 Ω N1 N2 TL071 100k Ω V CC Symbol Parameter TL071M, AM, BM TL071I, AI, BI TL071C, AC, BC Unit VCC Supply voltage - note 1) 1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the zero reference level is the midpoint between VCC + and VCC ±18 V Vi Input Voltage - note 2) 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less. ±15 V Vid Differential Input Voltage - note 3) 3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. ±30 V Ptot Power Dissipation 680 mW Output Short-circuit Duration - note 4) 4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded Infinite Toper Operating Free-air Temperature Range -55 to +125 -40 to +105 0 to +70 °C Tstg Storage Temperature Range -65 to +150 °C

ELECTRICAL CHARACTERISTICS

VCC = ±15V, Tamb = +25°C (unless otherwise specified) Symbol Parameter TL071I,M,AC,AI,AM, BC,BI,BM TL071C Unit Vio Input Offset Voltage (Rs = 50Ω ) Tamb = +25°C TL071 TL071A TL071B Tmin ≤ Tamb ≤ Tmax TL071 TL071A TL071B 31 0 mV DV io Input Offset Voltage Drift 10 10 µV/°C Iio Input Offset Current Tamb = +25°C Tmin ≤ Tamb ≤ Tmax 51 0 0 5 100 pA nA Iib Input Bias Current -note 1) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax 20 200 20 200 pA nA Avd Large Signal Voltage Gain (R L = 2kΩ , Vo = ±10V) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax 200 25 200 V/mV SVR Supply Voltage Rejection Ratio (RS = 50Ω) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax 86 70 dB ICC Supply Current, no load Tamb = +25°C Tmin ≤ Tamb ≤ Tmax 1.4 2.5 2.5 1.4 2.5 2.5 mA Vicm Input Common Mode Voltage Range ±11 +15 -12 ±11 +15 -12 V CMR Common Mode Rejection Ratio (RS = 50Ω) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax 86 70 dB Ios Output Short-circuit Current Tamb = +25°C Tmin ≤ Tamb ≤ Tmax 40 60 40 60 mA ±Vopp Output Voltage Swing Tamb = +25°C RL = 2kΩ RL = 10kΩ Tmin ≤ Tamb ≤ Tmax RL = 2kΩ RL = 10kΩ 13.5 13.5 V SR Slew Rate (T amb = +25°C) Vin = 10V, RL = 2kΩ , CL = 100pF, unity gain 8 16 8 16 V/µs tr Rise Time (Tamb = +25°C) Vin = 20mV, RL = 2kΩ , CL = 100pF, unity gain 0.1 0.1 µs Kov Overshoot (Tamb = +25°C) Vin = 20mV, RL = 2kΩ , CL = 100pF, unity gain 10 10 GBP Gain Bandwidth Product (Tamb = +25°C) Vin = 10mV, RL = 2kΩ , CL = 100pF, f= 100kHz 2.5 4 2.5 4 MHz R i Input Resistance 1012 1012 Ω

Total Harmonic Distortion (Tamb = +25°C, f= 1kHz, RL = 2kΩ ,CL = 100pF, Av = 20dB, Vo = 2Vpp) 0.01 0.01 en Equivalent Input Noise Voltage R S = 100Ω, f = 1KHz 15 15 ∅ m Phase Margin 45 45 degrees 1. The input bias currents are junction leakage currents which approximately double for every 10°C increase in the junction temperature. Symbol Parameter TL071I,M,AC,AI,AM, BC,BI,BM TL071C Unit nV Hz

MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE versus FREQUENCY MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE versus FREQUENCY MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE versus LOAD RESISTANCE MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE versus FREQUENCY MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE versus FREE AIR TEMP. MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE versus SUPPLY VOLTAGE 02 4 68 1 0 12 14 16 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE (V) R L = 10 kΩ Tamb = +25˚C SUPPLY VOLTAGE ( V)

INPUT BIAS CURRENT versus FREE AIR TEMPERATURE LARGE SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT versus FREQUENCY SUPPLY CURRENT PER AMPLIFIER versus FREE AIR TEMPERATURE LARGE SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION versus FREE AIR TEMP . TOTAL POWER DISSIPATION versus FREE AIR TEMPERATURE COMMON MODE REJECTION RATIO versus FREE AIR TEMPERATURE 100 0.1 0.01 INPUT BIAS CURRENT (nA) -50 -25 0 25 50 75 100 125 TEMPERATURE (˚C) V CC = 15V FREQUENCY (Hz) DIFFERENTIAL VOLTAGE AMPLIFICATION (V/V) 100 100 1K 10K 100K 10M 1M DIFFERENTIAL VOLTAGE AMPLIFICATION (left scale) 180 R = 2k/C87 C = 100pF V = 15V T = +125°C L L CC amb PHASE SHIFT (right scale) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 SUPPLY CURRENT (mA) -75 -50 -25 0 25 50 75 100 125 TEMPERATURE (˚C) V CC = 15V No signal No load 1000 400 200 100 DIFFERENTIAL VOLTAGE AMPLIFICATION (V/V) -75 -50 -25 0 25 50 75 100 125 TEMPERATURE (˚C) R L = 2kΩ V O = 10V V CC = 15V 250 225 200 175 150 125 100 TOTAL POWER DISSIPATION (mW)-75 -50 -25 0 25 50 75 100 125 TEMPERATURE (˚C) V CC = 15V No signal No load -50 -25 0 25 50 75 100 125 COMMON MODE MODE REJECTION RATIO (dB) TEMPERATURE (˚C) -75 R L = 10 kΩ = 15VV CC

VOLTAGE FOLLOWER LARGE SIGNAL PULSE RESPONSE EQUIVALENT INPUT NOISE VOLTAGE versus FREQUENCY OUTPUT VOLTAGE versus ELAPSED TIME TOTAL HARMONIC DISTORTION versus FREQUENCY 0 0.5 1 1.5 2 2.5 3 3. 5 INPUT AND OUTPUT VOLTAGES (V) TIME (/C109s) = 15VVCC RL = 2 k/C87 = 100pFCL Tamb = +25°C OUTPUT INPUT EQUIVALENT INPUT NOISE VOLTAGE (nV/VHz) 10 40 100 400 1k 4k 10k 40k 100k FREQUENCY (Hz) A V = 10 R S = 100 Ω Tamb = +25˚C VCC = 15V tr OUTPUT VOLTAGE (mV) TIME (µs) 10% 90% OVERSHOOT R L = 2kΩ Tamb = +25˚C V CC = 15V 0.4 0.1 0.04 0.01 0.004 0.001 TOTAL HARMONIC DISTORTION (%) 100 400 1k 4k 10k 40k 100 k FREQUENCY (Hz) A V = 1 T amb = +25˚C V CC = 15V = 6VV O (rms) A V = 1 T amb = +25˚C = 6VV O (rms) V CC = 15V

PARAMETER MEASUREMENT INFORMATION Figure 1 : Voltage Follower Figure 2 : Gain-of-10 Inverting Amplifier TYPICAL APPLICATIONS (0.5Hz) SQUARE WAVE OSCILLATOR HIGH Q NOTCH FILTER eI TL071 eo C L= 100pF R = 2kΩL -eI TL071 R L C L= 100pF 1k Ω 10k Ω eo TL071 1k Ω R F = 100k Ω 9.1k Ω 3.3k Ω +15V -15V 3.3k Ω C = 3.3 µFF f = osc F2 x R FC TL071 R1 R2 C2C1 C1 = C2 = C3 2 = 100pF f = o F2 x R FC = 1kHz R1 = R2 = 2R3 = 1.5M Ω

8 PINS - PLASTIC DIP

Dim. Millimeters Inches A 3.32 0.131 a1 0.51 0.020 B 1.15 1.65 0.045 0.065 b 0.356 0.55 0.014 0.022 b1 0.204 0.304 0.008 0.012 D 10.92 0.430 E 7.95 9.75 0.313 0.384 e 2.54 0.100 e3 7.62 0.300 e4 7.62 0.300 F 6.6 0260 i 5.08 0.200 L 3.18 3.81 0.125 0.150 Z 1.52 0.060

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom © http://www.st.com PACKAGE MECHANICAL DATA

8 PINS - PLASTIC MICROPACKAGE (SO)

Dim. Millimeters Inches A 1.75 0.069 a1 0.1 0.25 0.004 0.010 a2 1.65 0.065 a3 0.65 0.85 0.026 0.033 b 0.35 0.48 0.014 0.019 b1 0.19 0.25 0.007 0.010 C 0.25 0.5 0.010 0.020 c1 45° (typ.) D 4.8 5.0 0.189 0.197 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 3.81 0.150 F 3.8 4.0 0.150 0.157 L 0.4 1.27 0.016 0.050 M 0.6 0.024 S 8° (max.)