TL071

TL071C MOTOROLA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

TL071 (Top View) TL072 (Top View) TL074 (Top View) D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) P SUFFIX PLASTIC PACKAGE CASE 626 N SUFFIX PLASTIC PACKAGE CASE 646 (TL074 Only) PIN CONNECTIONS PIN CONNECTIONS Offset Null Noninvt Input VEE Inv + Input VEE Inputs A Output A Inputs 1 Output 1 VCC Inputs 2 Output 2 NC VCC Output Offset Null Inputs B Output B VCC Output 4 Inputs 4 VEE Inputs 3 Output 3 – – + + 11 4 /C0084/C0076/C0048/C0055/C0049/C0067/C0044/C0065/C0067 /C0084/C0076/C0048/C0055/C0050/C0067/C0044/C0065/C0067 /C0084/C0076/C0048/C0055/C0052/C0067/C0044/C0065/C0067 SEMICONDUCTOR TECHNICAL DATA LOW NOISE, JFET INPUT OPERATIONAL AMPLIFIERS Order this document by TL071C/D 1MOTOROLA ANALOG IC DEVICE DATA /C0076/C0111/C0119 /C0078/C0111/C0105/C0115/C0101/C0044 /C0074/C0070/C0069/C0084 /C0073/C0110/C0112/C0117/C0116 /C0079/C0112/C0101/C0114/C0097/C0116/C0105/C0111/C0110/C0097/C0108 /C0065/C0109/C0112/C0108/C0105/C0102/C0105/C0101/C0114/C0115 These low noise JFET input operational amplifiers combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input device for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit low noise and low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications. These devices are available in single, dual and quad operational amplifiers which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

• Low Input Noise Voltage: 18 nV/ Hz/C0504 Typ
• Low Harmonic Distortion: 0.01% Typ
• Low Input Bias and Offset Currents
• High Input Impedance: 1012 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
• Low Supply Current: 1.4 mA per Amp

ORDERING INFORMATION

TA =0 ° to +70°C SO–8 Single TL071ACP TA = 0° to +70°C Plastic DIP Dual TL072CD TA =0 ° to +70°C SO–8 Dual TL072ACP TA = 0° to +70°C Plastic DIP Quad TL074CN, ACN TA = 0° to +70°C Plastic DIP  Motorola, Inc. 1997 Rev 1

2 MOTOROLA ANALOG IC DEVICE DATA

1. The output may be shorted to ground or either supply. Temperature and/or supply voltages

must be limited to ensure that power dissipation ratings are not exceeded.

1. ESD data available upon request.
2. Input Bias currents of JFET input op amps approximately double for every 10°C rise in junction temperature as shown in Figure 3. To maintain

junction temperature as close to ambient temperature as possible, pulse techniques must be used during testing. Figure 1. Unity Gain Voltage Follower Figure 2. Inverting Gain of 10 Amplifier

TL071C,AC TL072C,AC TL074C,AC 3MOTOROLA ANALOG IC DEVICE DATA ELECTRICAL CHARACTERISTICS (VCC = 15 V, VEE = –15 V, TA = 25°C, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Input Offset Voltage (RS ≤ 10 k, VCM = 0) VIO mV TL071C, TL072C – 3.0 10 TL074C – 3.0 10 TL07_AC – 3.0 6.0 Average Temperature Coefficient of Input Offset Voltage ΔVIO/ΔT – 10 – µV/°C R S = 50 Ω , TA = Tlow to Thigh (Note 1) Input Offset Current (VCM = 0) (Note 2) IIO pA TL07_C – 5.0 50 TL07_AC – 5.0 50 Input Bias Current (VCM = 0) (Note 2) IIB pA TL07_C – 30 200 TL07_AC – 30 200 Input Resistance ri – 1012 – Ω Common Mode Input Voltage Range VICR V TL07_C ±10 15, –12 – TL07_AC ±11 15, –12 – Large–Signal Voltage Gain (VO = ±10 V, RL ≥ 2.0 k) AVOL V/mV TL07_C 25 150 – TL07_AC 50 150 – Output Voltage Swing (Peak–to–Peak) VO 24 28 – V (RL = 10 k) Common Mode Rejection Ratio (RS ≤ 10 k) CMRR dB TL07_C 70 100 – TL07_AC 80 100 – Supply Voltage Rejection Ratio (RS ≤ 10 k) PSRR dB TL07_C 70 100 – TL07_AC 80 100 – Supply Current (Each Amplifier) ID – 1.4 2.5 mA Unity Gain Bandwidth BW – 4.0 – MHz Slew Rate (See Figure 1) SR – 13 – v/µs Vin = 10 V, RL = 2.0 k, CL = 100 pF Rise Time (See Figure 1) tr – 0.1 – µs Overshoot (Vin = 20 mV, RL = 2.0 k, CL = 100 pF) OS – 10 – % Equivalent Input Noise Voltage en – 18 – nV/ Hz√ R S = 100 Ω , f = 1000 Hz Equivalent Input Noise Current in – 0.01 – pA/ Hz√ R S = 100 Ω , f = 1000 Hz Total Harmonic Distortion THD – 0.01 – % VO (RMS) = 10 V, RS ≤ 1.0 k, RL ≥ 2.0 k, f = 1000 Hz Channel Separation CS – 120 – dB AV = 100 NOTES: 1. Tlow =0 °C for TL071C,AC T high =7 0°C for TL071C,AC 0°C for TL072C,AC Thigh =7 0°C for TL072C,AC 0°C for TL074C,AC Thigh =7 0°C for TL074C,AC 2. Input Bias currents of JFET input op amps approximately double for every 10°C rise in junction temperature as shown in Figure 3. To maintain junction temperature as close to ambient temperature as possible, pulse techniques must be used during testing.

4 MOTOROLA ANALOG IC DEVICE DATA

Figure 3. Input Bias Current Figure 4. Output Voltage Swing Figure 5. Output Voltage Swing Figure 6. Output Voltage Swing Figure 7. Output Voltage Swing Figure 8. Supply Current per Amplifier

Figure 9. Large Signal Voltage Gain and Figure 10. Large Signal Voltage Gain Figure 11. Normalized Slew Rate Figure 12. Equivalent Input Noise Voltage Figure 13. Total Harmonic Distortion

100 M –75 –100 150

6 MOTOROLA ANALOG IC DEVICE DATA

Figure 14. Audio Tone Control Amplifier Figure 15. High Q Notch Filter

TL071C,AC TL072C,AC TL074C,AC 7MOTOROLA ANALOG IC DEVICE DATA OUTLINE DIMENSIONS P SUFFIX PLASTIC PACKAGE CASE 626–05 ISSUE K F NOTE 2 –A– –B– –T– SEATING PLANE H J G D K N C L M MAM0.13 (0.005) B MT NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. DIM MIN MAX MIN MAX INCHESMILLIMETERS A 9.40 10.16 0.370 0.400 B 6.10 6.60 0.240 0.260 C 3.94 4.45 0.155 0.175 D 0.38 0.51 0.015 0.020 F 1.02 1.78 0.040 0.070 G 2.54 BSC 0.100 BSC H 0.76 1.27 0.030 0.050 J 0.20 0.30 0.008 0.012 K 2.92 3.43 0.115 0.135 L 7.62 BSC 0.300 BSC N 0.76 1.01 0.030 0.040 /C0095/C0095 D SUFFIX PLASTIC PACKAGE CASE 751–05 (SO–8) ISSUE S SEATING PLANE A0.25 M CB SS

0.25 M B M

h /C0113 C X 45/C0095 L DIM MIN MAX MILLIMETERS A 1.35 1.75 A1 0.10 0.25 B 0.35 0.49 C 0.18 0.25 D 4.80 5.00 E

1.27 BSCe

3.80 4.00 H 5.80 6.20 h 0 7 L 0.40 1.25 /C0113 0.25 0.50 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETERS. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. D E H A B e BA1 C A 0.10

TL071C,AC TL072C,AC TL074C,AC

8 MOTOROLA ANALOG IC DEVICE DATA

CASE 646–06 ISSUE M 14 8 B A DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.715 0.770 18.16 18.80 B 0.240 0.260 6.10 6.60 C 0.145 0.185 3.69 4.69 D 0.015 0.021 0.38 0.53 F 0.040 0.070 1.02 1.78 G 0.100 BSC 2.54 BSC H 0.052 0.095 1.32 2.41 J 0.008 0.015 0.20 0.38 K 0.115 0.135 2.92 3.43 L N 0.015 0.039 0.38 1.01 /C0095/C0095 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. F HG D K C SEATING PLANE N –T– 14 PL M0.13 (0.005) L M J 0.290 0.310 7.37 7.87 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE : http://motorola.com/sps/ TL071C/D◊