TL022C

TL022C TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Very Low Power Consumption /C0068Power Dissipation With ± 2-V Supplies 170 µW Typ /C0068Low Input Bias and Offset Currents /C0068Output Short-Circuit Protection /C0068Low Input Offset Voltage /C0068Internal Frequency Compensation /C0068Latch-Up-Free Operation /C0068Popular Dual Operational Amplifier Pinout TL022M IS NOT RECOMMENDED FOR NEW DESIGNS

description

The TL022 is a dual low-power operational amplifier designed to replace higher power devices in many applications without sacrificing system performance. High input impedance, low supply currents, and low equivalent input noise voltage over a wide range of operating supply voltages result in an extremely versatile operational amplifier for use in a variety of analog applications including battery-operated circuits. Internal frequency compensation, absence of latch-up, high slew rate, and output short-circuit protection assure ease of use. The TL022C is characterized for operation from 0°C to 70°C. The TL022M is characterized for operation over the full military temperature range of –55°C to 125°C. AVAILABLE OPTIONS VIOmax PACKAGE TA VIOmax AT 25°C SMALL OUTLINE CERAMIC DIP PLASTIC DIP CERAMIC FLAT PACKAT 25 C (D) (JG) (P) CERAMIC FLAT PACK (U) 0°C to 70°C 5 mV TL022CD — TL022CP — –55°C to 125°C 5 mV — TL022MJG — TL022MU The D package is available taped and reeled. Add the suffix R to the device type (i.e. TL022CDR). Copyright  1990, Texas Instruments IncorporatedPRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. symbol (each amplifier) 1OUT 1IN– 1IN+ GND VCC 2OUT 2IN– 2IN+ TL022M ...J G PACKAGE TL022C ...D O R P PACKAGE (TOP VIEW) NC 1OUT 1IN– 1IN+ VCC – NC VCC+ 2OUT 2IN– 2IN+ TL022M ...U PACKAGE (TOP VIEW) IN+ OUT IN–

TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

VCC– IN– IN+ OUT absolute maximum ratings over operating free-air temperature range (unless otherwise noted) TL022C TL022M UNIT Supply voltage, VCC+ (see Note 1) 18 22 V Supply voltage, VCC– (see Note 1) –18 –22 V Differential input voltage (see Note 2) ± 30 ± 30 V Input voltage (any input, see Notes 1 and 3) ± 15 ± 15 V Duration of output short circuit (see Note 4) unlimited unlimited Continuous total dissipation See Dissipation Rating Table Operating free-air temperature range 0 to 70 –55 to 125 °C Storage temperature range –65 to 150 –65 to 150 °C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG or U package 300 °C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package 260 °C NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC– . 2. Differential voltages are at IN+ with respect to IN–. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or either power supply. For the TL022M only, the unlimited duration of the short circuit applies at (or below) 125°C case temperature or 75°C free-air temperature. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR DERATE ABOVE T A TA = 70°C POWER RATING TA = 125°C POWER RATING D 680 mW 5.8 mW/°C 33°C 464 mW — JG 680 mW 8.4 mW/ °C6 9 °C 672 mW 210 mW P 680 mW 8.0 mW/ °C6 5 °C 640 mW — U 675 mW 5.4 mW/°C 25°C 432 mW 135 mW

TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions MIN MAX UNIT Supply voltage, VCC+ 5 15 V Supply voltage, VCC– –5 –15 V electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) PARAMETER TEST CONDITIONS † TL022C TL022M UNITPARAMETER TEST CONDITIONS † MIN TYP MAX MIN TYP MAX UNIT VIO Input offset voltage VO = 0, 25°C 1 5 1 5 mVVIO Input offset voltage O , R S = 50 Ω Full range 7.5 6 mV IIO Input offset current VO =0 25°C 15 80 5 40 nAIIO Input offset current VO = 0 Full range 200 100 nA IIB Input bias current VO =0 25°C 100 250 50 100 nAIIB Input bias current VO = 0 Full range 400 250 nA VICR Common-mode input 25°C ± 12 ± 13 ± 12 ± 13 VVICR voltage range Full range ± 12 ± 12 V VO(PP) Maximum peak-to-peak R L = 10 kΩ 25°C 20 26 20 26 VVO(PP) output voltage swing R L ≥ 10 kΩ Full range 20 20 V AVD Large-signal differehtialR L ≥ 10 kΩ, 25°C 60 80 72 86 dBAVD gg voltage amplification L , VO = ± 10 V Full range 60 66 dB B1 Unity-gain bandwidth 25°C 0.5 0.5 MHz CMRR Common-mode rejection VIC = VICRmin, 25°C 60 72 60 72 dBCMRR j ratio IC ICR , R S = 50 Ω Full range 60 60 dB kSVS Supply voltage sensitivityVCC = ± 9 V to ± 15 V, 25°C 30 200 30 150 µV/VkSVS yg y (ΔVIO/ΔVCC ) CC , R S = 50 Ω Full range 200 150 µV/V Eilt i t i A2 0 d BVn Equivalent input noise voltage AVD = 20 dB, B=1H z f = 1 kHz 25°C 50 50 nV/Hzvoltage B = 1 Hz, IOS Short-circuit output current 25°C ± 6 ± 6 mA ICC Supply current (both VO =0 No load 25°C 130 250 130 250 µAICC amplifiers) VO = 0, No load Full range 250 250 µA PD Total dissipation VO =0 No load 25°C 3.9 7.5 3.9 6 mWPD (both amplifiers) VO = 0, No load Full range 7.5 6 mW † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for TL022C is 0°C to 70°C and for TL022M is –55°C to 125°C. operating characteristics, VCC ± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS MIN TYP MAX UNIT tr Rise time VI=2 0m V R L =1 0kΩ C L= 100pF See Figure 1 0.3 µs Overshoot factor VI = 20 mV , R L = 10 kΩ , C L= 100 pF, See Figure 1 SR Slew rate at unity gain VI = 10 V, R L = 10 kΩ, C L= 100 pF, See Figure 1 0.5 V/µs

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Figure 1. Rise Time, Overshoot Factor, and Slew Rate

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright  1998, Texas Instruments Incorporated