TL01412 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
www.element14.com www.farnell.com www.newark.com Page <1> V1.003/12/12 Rapid Assembly PCB Holder Description: A very high quality, fully adjustable clamping mechanism, ideal for supporting circuit boards during repair. The holder features a four position, spring loaded locking mechanism, allowing the board once clamped, to be simply moved in every direction through 360°. The vice is also fully height adjustable, allowing a board to be situated vertically between 50 to 340mm from the bench level. The board clamping arms are also adjustable and can be mounted on any of the four sides of the cross-supporting bar. The clamping arms are also fully adjustable in width from 11 to 245mm. The vice is manufactured from high grade, chrome vanadium steel with a cast base for weight and stability which can be bench mounted for added stability. Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Part Number Table Description Part Number Rapid Assembly, PCB Holder TL01412 Features:
- Easy turn adjusting wheels for speedy adjustment
- Manufactured in the USA to precise, exacting standards
- Vice weighs 2.9kg
- PanaVise rapid assembly circuit board holder features eight position rotating adjustment, six positive lock positions in the vertical plane and height adjustment for quick board rotation speeds and component insertion and soldering
- Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick
- Add the 318 accessory cross bars and the bar width can be extended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide
- Arms move independently and may be positioned adjacent to each other
- Additional sets of arms are available for dual or multiple board use
- Weighted base is extremely stable
- Height from base to top of vertical shaft is 10" (254mm) Specifications: For Use With : PCB Weight : 2.9k