TG035QVLQAANN-GN00

Online Datasheet

Read TG035QVLQAANN-GN00 online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 23

Technical content

Spec No. TQ3C-8EAF0-E1YAJ05-01 ç SPEC Date February 18, 2013 TYPE : TG035QVLQAANN-GN00 < 3.5 inch QVGA transmissive monochrome TFT with LED backlight> K Y O C E R A C O R P O R A T I O N ç LCD DIVISION This specification is subject to change without notice. C o n s u l t K y o c e r a b e f o r e o r d e r i n g . Designed by: Engineering dept. Confirmed by: QA dept. Original Issue Date Prepared Checked Approved Checked Approved January 31, 2013

Application 2. Construction and outline 3. Mechanical specifications 4. Absolute maximum ratings 5. Electrical characteristics 6. Optical characteristics 7. Interface signals 8. Input timing characteristics 9. Backlight characteristics 10. Lot number identification 11. Warranty 12. Precautions for use 13. Reliability test data 14. Outline drawing 'FC

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page Warning 1. This Kyocera LCD module has been specifically designed for use only in electronic devices and industrial machines in the area of audio control, office automation, industrial control, home appliances, etc. The module should not be used in applications where the highest level of safety and reliability are required and module failure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. Such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. Kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. Customer agrees to indemnify, defend and hold Kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of Customer's use, or sale for use, or Kyocera modules in applications. Caution 1. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer in a two-year period.

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page Revision record Designed by : Engineering dept. Confirmed by : QA dept. Date Prepared Checked Approved Checked Approved February 18, 2013 Rev.No. Date Page Descriptions 01 Feb 18, 2013 4 6. Optical characteristics Viewing angle rangeçʙ ChangeВUPPER”80” deg.ˠ”70” deg. p

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 1. Application This document defines the specification of TG035QVLQAANN-GN00. (RoHS Compliant) 2. Construction and outline LCD Backlight system Polarizer Additional circuit : Transmissive monochrome dot matrix type TFT : LED : Glare treatment : Timing controller, Power supply (3.3V input) (without constant current circuit for LED Backlight) 3. Mechanical specifications Item Specification Unit Outline dimensions 1) 76.9(W)×63.9(H)×4.9(D) mm Active area 70.56(W)×52.92(H) (8.8cm/3.5 inch(Diagonal)) mm Dot format 320×3(W)×240(H) dot Dot pitch 0.0735(W)×0.2205(H) mm Base color 2) Normally White - Mass 40 g 1) Projection not included. Please refer to outline for details. 2) Due to the characteristics of the LCD material, the color varies with environmental temperature.

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 4. Absolute maximum ratings 4-1. Electrical absolute maximum ratings Item Symbol Min. Max. Unit Supply voltage V DD -0.3 4.0 V Input signal voltage 1) V IN -0.3 4.0 V LED forward current 2) 3) IF - 30 mA 1) Input signal : CK, DA0ʙDA7, DB0ʙDB7, DC0ʙDC7, HSYNC, VSYNC, ENAB, REST, CSB, SCK, SDI 2) For each “AN-CA” 3) Do not apply reversed voltage. 4-2. Environmental absolute maximum ratings Item Symbol Min. Max. Unit Operating temperature 1) T OP -20 70 °C Storage temperature 2) T STO -30 80 °C Operating humidity 3) H OP 10 4) %RH Storage humidity 3) H STO 10 4) %RH Vibration - 5) 5) - Shock - 6) 6) - 1) Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25°C, another temperature range should be confirmed. 2) Temp. = -30°Cʻ48h , Temp. = 80°Cʻ168h ççç Store LCD at normal temperature/humidity. Keep them free from vibration and shock. An LCD that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard. ç (Please refer to “Precautions for Use” for details.) 3) Non-condensing 4) Temp.ʽ40°C, 85%RH Max. çç Temp. ʼ40°C, Absolute humidity shall be less than 85%RH at 40°C. ç 5)çç Frequency 10ʙ55 Hz Vibration width 0.15mm Acceleration value (0.3ʙ9 m/s2) Interval 10-55-10 Hz ç̍ minutes ççççççç 2 hours in each direction X, Y, Z (6 hours total) ççççççç EIAJ ED-2531 6) Acceleration: 490 m/s2, Pulse width: 11 ms 3 times in each direction: ±X, ±Y, ±Z ççç EIAJ ED-2531

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 5. Electrical characteristics ççççççççççççç çççç Temp. = -20ʙ70°C Item Symbol Condition Min. Typ. Max. Unit Supply voltage 1) V DD - 3.0 3.3 3.6 V Current consumption I DD 2) - 8.0 11.3 mA Permissive input ripple voltage V RP VDD=3.3V - - 100 mVp-p VIL "Low" level 0 - 0.2V DD V Input signal voltage 3) VIH "High" level 0.8V DD - V DD V 1) VDD-turn-on conditions 2) I DD measuring conditions Typ. : V DD=3.3V, Temp. = 25°C Max. : V DD=3.6V, Temp. = 70°C Display pattern 3) Input signal : CK, DA0ʙDA7, DB0ʙDB7, DC0ʙDC7, H SYNC, VSYNC, ENAB, REST, CSB, SCK, SDI REST Signal 3) LED ON VDD Min. 10μs Min. 10μs Min. 200ms Min. 200ms Min. 0 Min. 0 SubPixelChecker 239 240 (dot) 958 959 960 （dot)

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 6. Optical characteristics çç ççççççççç çççççççç M e a s u r i n g s p o t =П6.0mm, Temp. = 25°C Item Symbol Condition Min. Typ. Max. Unit Rise τ r В=П=0° - 8 - ms Response time Down τ d В=П=0° - 22 - ms ВUPPER - 70 - ВLOWER - 60 - deg. ПLEFT - 80 - Viewing angle range View direction : 12 o’clock ( G r a y i n v e r s i o n ) φRIGHT CRʾ10 - 80 - deg. Contrast ratio CR В=П=0° 700 1000 - - Brightness L IF=15mA/Line 840 1200 - cd/m 2 x 0.260 0.310 0.360 Chromaticity coordinates White y В=П=0° 0.260 0.310 0.360 6-1. Definition of contrast ratio CR(Contrast ratio) ʹ Brightness with all pixels "White" Brightness with all pixels "Black" 6-2. Definition of response time ĉĹİĮįĻĵĬĺĺ ø÷÷ì Ā÷ì Нī Ā÷ì ø÷ì НĹ ĞįİĻĬ ĉĳĨĪĲ ĞįİĻĬ

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 6-3. Definition of viewing angle 6-4. Brightness measuring points 1) Rating is defined as the white brightness at center of display screen(3). 2) 5 minutes after LED is turned on. (Ambient Temp.=25 ˆ) ôĿ òĿ ôŀ òŀ ПĄ÷˃ ВēĖĞČę ВĜėėČę ôĿ òĿ ôŀ ВĄ÷˃ ПęĐĎďěПēČčě ВçīİĹĬĪĻİĶĵ ПçīİĹĬĪĻİĶĵ òŀ (dot) (dot)80×3 160×3 240×3 120 180

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 7. Interface signals No. Symbol Description Note

1 GND GND

2 GND GND

3 V DD 3.3V power supply 4 V DD 3.3V power supply

5 DA0 data signal(LSB)

6 DA1 data signal

7 DA2 data signal

8 DA3 data signal

9 DA4 data signal

10 DA5 data signal

11 DA6 data signal

12 DA7 data signal(MSB)

13 DB0 data signal(LSB)

14 DB1 data signal

15 DB2 data signal

16 DB3 data signal

17 DB4 data signal

18 DB5 data signal

19 DB6 data signal

20 DB7 data signal(MSB)

21 DC0 data signal(LSB)

22 DC1 data signal

23 DC2 data signal

24 DC3 data signal

25 DC4 data signal

26 DC5 data signal

27 DC6 data signal

28 DC7 data signal(MSB)

29 GND GND

30 CK Sampling clock

31 CSB Select signal(SPI)

32 H SYNC Horizontal synchronous signal(negative)

33 V SYNC Vertical synchronous signal(negative)

34 ENAB Data Enable (Low signal only)

35 GND GND

36 REST Reset signal

37 SCK Clock (SPI)

38 SDI Data signal(SPI)

39 GND GND

Since it is interior terminal, do not connect signal and make it as OPEN terminal.

43 NC NC

44 GND GND

45 CA1 Cathode1

46 NC NC

47 AN1 Anode1

48 AN2 Anode2

49 NC NC

50 CA2 Cathode2

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 8. Input timing characteristics 8-1. LCD Item Symbol Min. Typ. Max. Unit Note Frequency 1/Tc - 6.5 - MHz Period Tc - 154 - ns High time Tch 50 - - ns Clock (CK) Low time Tcl 50 - - ns Set up time Tds 12 - - ns Data (DA0~DA7,DB0~ DB7,DC0~DC7) Hold time Tdh 12 - - ns Set up time Ths 20 - - ns Hold time Thh 20 - - ns Frequency 1/Th - 14.9 - kHz Period Th - 408 - Tc Front porch Thf - 20 - Tc Horizontal sync. Signal (HSYNC) Back porch Thb - 68 - Tc Horizontal display period Thd 320 Tc Set up time Tvs 20 - - ns Hold time Tvh 20 - - ns Period Tv - 262 - Th Front porch Tvf - 4 - Th Vertical sync. Signal (VSYNC) Back porch Tvb - 18 - Th Vertical display period Tvd 240 Th Synchronous signal phase lag Thv ̌ - 240 Tc Refresh rate 1/Tv - 60 - Hz Reset signal (REST) Pulse width Tres 10 - - Жs 1) In case of lower frequency, the deterioration of the display quality, flicker etc., may occur.

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç ċďø ċďù ċďú ċďùû÷ ċďùúĀ ěĽĩ ěĽī ěĽĭ ěĽ ċúøĀċù ċúďĶĹİŁĶĵĻĨĳçĉĳĨĵĲİĵĮ ĝĬĹĻİĪĨĳçĉĳĨĵĲİĵĮ ďĹİŁĶĵĻĨĳçĉĳĨĵĲİĵĮ ĝĬĹĻİĪĨĳçĉĳĨĵĲİĵĮ ěįĩ ěįī ěįĭ ěį ċø ċúù÷ ěįĺóěĽĺóěīĺ ěįįóěĽįóěīį ěĪį ěĪĳ ěĪ ěįĽ ĝĬĹĻİĪĨĳçĺŀĵĪįĹĶĵĶļĺ ĺİĮĵĨĳïĝĺŀĵĪð ċĨĻĨçĺİĮĵĨĳ ïę÷ʙęþóĎ÷ʙĎþó çĉ÷ʙĉþð ċĨĻĨçĺİĮĵĨĳ ïę÷ʙęþóĎ÷ʙĎþó çĉ÷ʙĉþð ĚĨĴķĳİĵĮçĪĳĶĪĲ ïĊĒð ďĶĹİŁĶĵĻĨĳïďĺŀĵĪð ĝĬĹĻİĪĨĳïĝĺŀĵĪð ċĨĻĨçĺİĮĵĨĳ ïę÷ʙęþóĎ÷ʙĎþóĉ÷ʙĉþð ďĶĹİŁĶĵĻĨĳçĺŀĵĪįĹĶĵĶļĺ ĺİĮĵĨĳïďĺŀĵĪð ĝĬĹĻİĪĨĳçĺŀĵĪįĹĶĵĶļĺ ĺİĮĵĨĳïĝĺŀĵĪð ďĶĹİŁĶĵĻĨĳçĺŀĵĪįĹĶĵĶļĺ ĺİĮĵĨĳïďĺŀĵĪð ďĶĹİŁĶĵĻĨĳ ĺŀĵĪįĹĶĵĶļĺ ĺİĮĵĨĳïďĺŀĵĪð ĚĨĴķĳİĵĮçĪĳĶĪĲ ïĊĒð ęĬĺĬĻçĺİĮĵĨĳ ïęČĚěð ěĹĬĺ (DA0ʙDA7, DB0ʙDB7, DC0ʙDC7) (DA0ʙDA7, DB0 ʙDB7, DC0ʙDC7) (DA0ʙDA7, DB0 ʙDB7, DC0ʙDC7)

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 8-2. SPI Item Symbol Min. Typ. Max. Unit Note Period Tsc 50 - - ns High time Tsch 25 - - ns Clock (SCK) Low time Tscl 25 - - ns Set up time Tcss 50 - - ns Hold time Tcsh 50 - - ns Select signal (CSB) High time Tcs 50 - - ns Set up time Tds 15 - - ns Data signal (SDI) Hold time Tdh 15 - - ns First Transmission (Register) Ex.R01h Second Transmission (Data) Ex.7300 Transmission Format ÷øøċĨĻĨçĺİĮĵĨĳ ïĚċĐð ĊĳĶĪĲ ïĚĊĒð ĚĬĳĬĪĻçĺİĮĵĨĳ ïĊĚĉð øø÷ęĞęĚ÷÷øø úûüýþÿĀ ø ÷ ø ø ø ù ø ú ø û ø ü ø ý ø þ ø ÿ øù øĀ ù÷ ùø ùù ùú ùû ÷÷÷ċĨĻĨçĺİĮĵĨĳ ïĚċĐð ĊĳĶĪĲ ïĚĊĒð ĚĬĳĬĪĻçĺİĮĵĨĳ ïĊĚĉð ěĪĺĺ ÷ęĞęĚ÷÷øø úûüýþÿĀø ÷ ø ø ø ù ø ú ø û ø ü ø ý ø þ ø ÿ øù øĀ ù÷ ùø ùù ùú ùû ċĉø÷ċĉøú ċĉøù ċĨĻĨçĺİĮĵĨĳ ïĚċĐð ĊĳĶĪĲ ïĚĊĒð ĚĬĳĬĪĻçĺİĮĵĨĳ ïĊĚĉð ċĉøû ċĉĀċĉøüęĞęĚ÷÷øø úûüýþÿĀ ø ÷ ø ø ø ù ø ú ø û ø ü ø ý ø þ ø ÿ ċĉøø ċĉÿ ċĉþ ċĉý ċĉü ċĉûø÷ ċĉú ċĉù ċĉø ċĉ÷ øù øĀ ù÷ ùø ùù ùú ùû ċĬĽİĪĬçĐċ ĐĵīĬĿçĹĬĮİĺĻĬĹçĺĬĻĻİĵĮçöçĐĵĺĻĹļĪĻİĶĵ ĔĚĉ ēĚĉ ěĹĨĵĺĭĬĹçĺĻĨĹĻĺ ěĹĨĵĺĭĬĹçĬĵīĺ ěĪĺį ěĺĪ ěĺĪį ěĺĪĳ ěīį ěīĺ ěĪĺ

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 8-3. Register Reg# Hex Code Note R01h 7300 1) R02h 0200 R03h 6464 R04h 04C7 R05h F444 R06h E860 R08h 06FF R0Ah 4008 R0Bh D400 R0Dh 422C R0Eh 2D00 R0Fh 0000 R16h 9F80 R17h 2212 R1Eh 006D R30h 0001 R31h 0105 R32h 0000 R33h 0102 R34h 0707 R35h 0206 R36h 0607 R37h 0201 R3Ah 1400 R3Bh 1400 1) Scanning R01h:7300h R01h:3300h R01h:7100h R01h:3100h 8-4. Input Data Signals and Display position on the screen ç DA DB DC D1,DH240 D2,DH240 D3,DH240 D1,DH1 D2,DH1 D3,DH1 D320,DH1 D1,DH2 D2,DH2 D3,DH2

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 9. Backlight characteristics Item Symbol Min. Typ. Max. Unit Note Forward current 1) IF - 15 - mA Ta=-20ʙ70°C - 13.0 13.8 V IF=15mA, Ta=-20ˆ - 12.5 13.3 V IF=15mA, Ta=25ˆ Forward voltage 1) VF - 12.2 13.0 V IF=15mA, Ta=70ˆ Operating life time 2), 3) T - 60,000 - h IF=15mA, Ta=25ˆ 1) For each “AN-CA” 2) When brightness decrease 50% of minimum brightness. The average life of a LED will decrease when the LCD is operating at higher temperatures. 3) Life time is estimated data.(Condition : IF=15mA, Ta=25 ˆ in chamber). 4) An input current below 5mA may reduce the brightness uniformity of the LED backlight. This is because the amount of light from each LED chip is different. Therefore, please evaluate carefully before finalizing the input current.

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 10. Lot number identification ç The lot number shall be indicated on the back of the backlight case of each LCD. TG035QVLQAANN-GN00 - □□ - □□ - □ M A D E I N □□□□□ çççç çççç çççççç ç 1 2 3 4 5 çç Year 2013 2014 2015 2016 2017 2018 Code 3 4 5 6 7 8 Code 1 2 3 4 5 6 Code 7 8 9 X Y Z 11. Warranty ç 11-1. Incoming inspection çç Please inspect the LCD within one month after your receipt. ç ç 11-2. Production warranty çç Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility. No1. - No5. above indicate 1. Year code 2. Month code 3 . D a t e 4 . V e r s i o n N u m b e r 5. Country of origin (Japan or China)

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 12. Precautions for use 12-1. Installation of the LCD 1) A transparent protection plate shall be added to protect the LCD and its polarizer. 2) The LCD shall be installed so that there is no pressure on the LSI chips. 3) The LCD shall be installed flat, without twisting or bending. 4) A transparent protection sheet is attached to the polarizer. Please remove the protection film slowly before use, paying attention to static electricity. 12-2. Static electricity 1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is required. 2) Workers should use body grounding. Operator should wear ground straps. 12-3. LCD operation 1) The LCD shall be operated within the limits specified. Operation at values outside of these limits may shorten life, and/or harm display images. 2) Please select the best display pattern based on your evaluation because flicker, lines or nonuniformity or unevenness can be vi sible depending on display patterns. 12-4. Storage 1) The LCD shall be stored within the temperature and humidity limits specified. Store in a dark area, and protect the LCD from direct sunlight or fluorescent light. 2) Always store the LCD so that it is free from external pressure onto it. 12-5. Usage 1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles, and/or peeling off of the polarizer may result. 2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and from being pushed or rubbed. 3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a little Ethanol. 4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from any source immediately. 5) Always keep the LCD free from condensation during testing. Condensation may permanently spot or stain the polarizer. 6) Do not disassemble LCD because it will result in damage. 7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose the LCD to chemicals such as an active gas. 8) Please do not use solid-base image pattern for long hours because a temporary afterimage may appear. We recommend using screen saver etc. in cases where a solid-base image pattern must be used. 9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes and mouth. In the case the fluid touches your body ; rinse it off right away with water and soap.

Spec No. TQ3C-8EAF0-E1YAJ05-01 Part No. TG035QVLQAANN-GN00 Page M407011çççççççççççççççççççççççççççççççç 13. Reliability test data çç Test item Test condition Test time Judgement High temp. atmosphere 80°C 240h Display function Display quality Current consumption : No defect : No defect : No defect Low temp. atmosphere -30°C 240h Display function Display quality Current consumption : No defect : No defect : No defect High temp. humidity atmosphere 40°C 90% RH 240h Display function Display quality Current consumption : No defect : No defect : No defect Temp. cycle -30°C R.T. 80°C 0.5h 0.5h 0.5h 10cycles Display function Display quality Current consumption : No defect : No defect : No defect High temp. operation 70°C 500h Display function Display quality Current consumption : No defect : No defect : No defect 1) Each test item uses a test LCD only once. The tested LCD is not used in any other tests. 2) The LCD is tested in circumstances in which there is no condensation. 3) The reliability test is not an out-going inspection. 4) The result of the reliability test is for your reference purpose only. çç The reliability test is conducted only to examine the LCD's capability.

ççççççççççççççççççççççççççççççççççççççç ç Spec No. TQ3C-8EAF0-E2YAJ05-00 Date January 31, 2013 KYOCERA INSPECTION STANDARD TYPE : TG035QVLQAANN-GN00 K Y O C E R A C O R P O R A T I O N ç L C D D I V I S I O N Designed by : Engineering dept. Co nfirmed by : QA dept. Original Issue Date Prepared Checked Approved Checked Approved January 31, 2013

Spec No. TQ3C-8EAF0-E2YAJ05-00 Part No. TG035QVLQAANN-GN00 Page Revision record Designed by : Engineering dept. Confirmed by : QA dept. Date Prepared Checked Approv ed Checked Approved Rev.No. Date Page Descriptions

ç ç Spec No. TQ3C-8EAF0-E2YAJ05-00 Part No. TG035QVLQAANN-GN00 Page ç ççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççç ç Visuals specification 1) Note Note 1. Customer identified anomalies not defined within this inspection standard shall be reviewed by Kyocera, and an additional standard shall be determined by mutual consent. 2. This inspection standard about the image quality shall be applied to any defect within the active area and shall not be applicable to outside of the area. General 3. Inspection conditions Luminance Inspection distance Temperature Directionçççççç : 500 Lux min. : 300 mm. : 25 ʶ 5 ˆ : Directly above Bright dot defect The dot is constant ly “on” when power applied to the LCD, even when all “Black” data sent to the screen. Inspection tool: 5% Transparency neutral density filter. Count dot: If the dot is visible through the filter. Don’t count dot: If the dot is not visible through the filter. Black dot defect The dot is constantly “off” when power applied to the LCD, even when all “White” data sent to the screen. Dot defect Adjacent dot Adjacent dot defect is defined as two or more bright dot defects or black dot defects. çççç Bubble, Scratch, Foreign particle (Polarizer, Cell, Backlight) Visible operating (all pixels “Black” or “White”) and non operating. External inspection Appearance inspection Does not satisfy the value at the spec. Definition of inspection item Definition of size Definition of circle size ̳ʹ(̰ʴ̱)/2 Definition of linear size

ç ç Spec No. TQ3C-8EAF0-E2YAJ05-00 Part No. TG035QVLQAANN-GN00 Page ç ççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççççç ç 2) Standard Classification Inspection item Judgement standard Bright dot defect Acceptable number Bright dot spacing : 4 : 5 mm or more Black dot defect Acceptable number Black dot spacing : 5 : 5 mm or more Bright dot defect Acceptable number : 2 2 dot join Black dot defect Acceptable number : 3 3 or more dots join Acceptable number : 0 Dot defect Total dot defects Acceptable number : 5 Max Defect (in LCD glass) Others White dot, Dark dot (Circle) Size (mm) Acceptable number 0.2 ʻ d ʽ 0.2 (Neglected) 0.2 ʻ d ʽ 0.4 5 0.4 ʻ d ʽ 0.5 3 0.5 ʻ d ʽ 0.4 0 Polarizer (Scratch) Width (mm) Length (mm) Acceptable number 0.1 ʻ W ʽ 0.1 ʵ ïĕĬĮĳĬĪĻĬīð 2.0 ʻ L ʽ 5.0 ïĕĬĮĳĬĪĻĬīð 0.1 ʻ W ʽ 0.3 5.0 ʻ L ʽ 5.0 0 0.3 ʻ W ʽ 0.3 ʵ 0 Polarizer (Bubble) Size (mm) Acceptable number 0.2 ʻ d ʽ 0.2 (Neglected) 0.2 ʻ d ʽ 0.3 5 0.3 ʻ d ʽ 0.5 3 0.5 ʻ d ʽ 0.4 0 Foreign particle ʢCircular shapeʣ Size (mm) Acceptable number 0.2 ʻ d ʽ 0.2 (Neglected) 0.2 ʻ d ʽ 0.4 5 0.4 ʻ d ʽ 0.5 3 0.5 ʻ d ʽ0 .4 0 External inspection (Defect on Polarizer or between Polarizer and LCD glass) Foreign particle ʢLinear shapeʣ Scratch Width (mm) Length (mm) Acceptable number 0.00 ʻ W ʽ 0.03 ʵ ïĕĬĮĳĬĪĻĬīð 2.0 ʻ L ʽ 2.0 ïĕĬĮĳĬĪĻĬīð 2.0 ʻ L ʽ 4.0 3 0.03 ʻ W ʽ 0.1 0 4.0 ʻ L ʽ 5.0 0 0.1 ʻ W ʽ0.3 ʵ (According to circular shape)

Product Information