TFS220E ETC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
tfs220E.doc version 1.0 01.07.99 VI TELEFILTER Filter specification TFS 220 E 1/4 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Measurement Condition Ambient Temperature: 23 °C Input Power Level: 0 dBm Source impedance: 50 Ω single ended Load impedance: 50 Ω single ended Terminating impedances: input: T.B.D output: T.B.D Construction, pin connection and 50 ΩΩΩΩ test circuit see page 2 Stability characteristics and packing see page 3 Air reflow temperature conditions see page 4 Characteristics Remark: Reference level for the relative attenuation arel is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss a e. The nominal frequency f N is fixed to 220,38 MHz. The given values for the relative attenuation a rel and for the phase ripple have to be reached at the frequencies given below also if the centre frequency f o is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo. D a t a typ. Value Limit Insertion Loss ae = amin 6.2 dB max. 10 dB (Reference level) Nominal Frequency fN - 220,38 MHz 5 dB - Bandwidth BW 1,6 MHz min. 1,26 MHz Relative Attenuation arel fN ± 0,63 MHz - max. 5 dB fN ± 1,25 MHz ... fN ± 20 MHz - min. 33 dB fN - 1,25 MHz 45 dB min. 35 dB fN + 1,25 MHz 45 dB min. 35 dB Pass Band Ripple fN ± 0,300 MHz - 0,3 dB max. 1,2 dB Phase linearity ϕ fN ± 0,300 MHz - 0,5 °rms max. 1,5 °rms fN ± 0,630 MHz - 2,9 °rms max. 3,75 °rms Operating Temperature Range - 30 °C ... + 80 °C Generated: Checked / approved:
tfs220E.doc version 1.0 01.07.99 VI TELEFILTER Filter specification TFS 220 E 2/4 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Construction and pin connection KN S 220 E 50 ΩΩΩΩ single ended test circuit Output
50 Ohm
1,2,3,5,6,7,8
1 Ground
2 Ground
3 Ground
4 Output
5 Output RF Return
6 Ground
7 Ground
8 Ground
9 Input
10 Input RF Return
tfs220E.doc version 1.0 01.07.99 VI TELEFILTER Filter specification TFS 220 E 3/4 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 30g, 18 ms, half sine wave, 3 sho cks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 150 Hz, 0.35 mm amplitude, 5g; 2 hours for 3 planes; DIN IEC 68 T2 - 6 3. Damp heat: 90 % to 95 % rel. humidity, 40 °C, 10 days; (steady state) DIN IEC 68 - 2 - 3 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 Do Po E F W EMBOSSED CARRIER TAPE COVER TAPE G P 2 Bo Ao 13,4 ± 0,1 Tape (all dimensions in mm) W : 16 ± 0,3 Po : 4 ± 0,1 Do : 1,5 + 0,5 E : 1,75 ± 0,1 F : 7,5 ± 0,1 G (min) : 0,75 P2 : 2 ± 0,05 P1 : 8 ± 0,1 D1(min) : 1,5 Ao : 5,4 ± 0,1 Bo : 7,4 ± 0,1 D1 : 1,5 + 0,5 A C N Reel (all dimensions in mm): A : 330 W1 : 16,4 +2 W2 (max) : 22,4 N (min) : >= 90 C : 13 ± 0,25 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.
tfs220E.doc version 1.0 01.07.99 VI TELEFILTER Filter specification TFS 220 E 4/4 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liab ility is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Air Reflow Temperature Conditions 1st and 2nd air reflow profile Name: pre-heating periods main-heating periods peak temperature Temperature: 150 °C - 170 °C over 200 °C 255 °C ± 5 °C Time: 60 sec. - 90 sec. 20 sec. - 25 sec. Chip-mount air reflow profile time / sec. temperature / °C 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. temperature / °C time / sec. temperature / °C 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120