TFPT_17 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.vishay.com Vishay Revision: 30-Aug-16 1 Document Number: 33017 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMD PTC - Nickel Thin Film Linear Thermistors

FEATURES

  • Alumina substrate base with nickel based PTC thin film element
  • 0603, 0805, and 1206 sizes available
  • Available in tape and reel packaging
  • S t a n d a r d R 25 tolerances: ± 0.5 %, ± 1 %, ± 5 %
  • Operation range -55 °C to +150 °C
  • High stability over the entire temperature range
  • cUL recognized component: File E148885
  • AEC-Q200 qualified (grade 1)
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 Notes (1) Contact Vishay if closer TCR lot tolerance is desired. (2) Other R25-values and tolerances are available upon request. (3) Rated continuous working voltage is maximum working voltage or whichever is less. (4) Zero power or zero dissipation is considered as measuring power max. 1 % of rated power P70. Note
  • Rated continuous working voltage is maximum working voltage or whichever is less. QUICK REFERENCE DATA PARAMETER VALUE UNITDESCRIPTION TFPT0603 TFPT0805 TFPT1206 Resistance value at 25 °C (2) 100 to 1K 100 to 5K 100 to 10K  Tolerance on R25-value (2) ± 0.5; ± 1; ± 5 % TCR at 25 °C 4110 ppm/KTolerance on TCR at 25 °C (1) ± 400 Operating temperature range: at rated power -55 to +70 °Cat zero dissipation (4) -55 to +150 Dissipation factor  (for information only) 1.8 2.3 4 mW/K Maximum rated power at 70 °C (P70) 75 100 125 mW Maximum working voltage RCWV (3) 30 40 50 V Climatic category (LCT/UCT/days) 55/150/56 - Weight 2 5.5 10 mg STANDARD RESISTANCE VALUES at 25 °C in  150 270 470 820 1.5K 2.7K 4.7K 6.8K GLOBAL PART NUMBER INFORMATION Global Part Numbering: TFPT1206L1002FM (preferred part number format) GLOBAL MODEL CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING TFPT0603 TFPT0805 TFPT1206 L = Linear 1002 = 10K D = ± 0.5 % F = ± 1 % J = ± 5 % M = Lead (Pb)-free, T/R (5000 pieces) V = Lead (Pb)-free, T/R (1000 pieces) Z = Tin/lead, T/R (5000 pieces) Y = Tin/lead, T/R (1000 pieces) P70 x R P70 x R T120 L1 0 6FP MFT 02

www.vishay.com Vishay Revision: 30-Aug-16 2 Document Number: 33017 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in millimeters CONSTRUCTION Note

  • Zero power is considered as measuring power max. 1 % of rated power P 70. Notes (1) Environmental performance specifications use test procedures as outlined in MIL-R23648D, MIL-STD 202 and AEC-Q200. (2) TFPTs are ESD sensitive. PART  NUMBER ABCDE TFPT 0603 1.55 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 TFPT 0805 2.00 ± 0.15 1.25 ± 0.15 0.45 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 TFPT 1206 3.05 ± 0.15 1.50 ± 0.15 0.55 ± 0.10 0.50 ± 0.25 0.50 ± 0.25 A B D C E Thermistor Alumina substrate Inner electrode Nickel barrier Solderable coating Overcoating TESTS AND REQUIREMENTS TEST CONDITIONS (1) REQUIREMENTS MAX |R25/R25| High temperature exposure (storage) AEC-Q200, 1000 h at 150 °C 0.25 % Temperature cycling AEC-Q200, 1000 cycles -55 °C / +125 °C 0.25 % Biased humidity 1000 h, 1 mA biased at 85 °C / 85 % RH 0.25 % 1000 h, 1 mA biased at 40 °C / 95 % RH 0.25 % Operational life 1000 h, P 70 max biased at 85 °C 0.25 % Mechanical shock and vibration MIL-STD 202, method 213 - 204 0.50 % Resistance to soldering heat MI L-STD 202, method 210, solderbath dipping 10 s at 260°C 0.25 % ESD (2) AEC-Q200-002, HBM (CD) 0.5 kV (0603), 1.0 kV (0805), 1.0 kV (1206) 0.25 % Board flex AEC-Q200-005, 2 mm during 60 s 0.25 % Terminal strength AEC-Q200-006, shear test 17.7 N during 60 s 0.25 % - 75 - 50 - 25 0 25 50 75 100 125 150 175 100 110 Temperature in °C Power in % of P70 Power Derating

www.vishay.com Vishay Revision: 30-Aug-16 3 Document Number: 33017 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATIO FORMULA RT = R25 x (9.0014 x 10-1 + 3.87235 x 10-3 (°C)-1 x T + 4.86825 x 10-6 (°C)-2 x T2 + 1.37559 x 10-9 (°C)-3 x T3) RATIO TOLERANCE EXAMPLES: so, ratio = 1.058 to 1.068 so, ratio = 1.416 to 1.504 AVERAGE RATIO R/R25 TFPT ALL SIZES AND VALUES RATIO TOLERANCES LOW TEMP. HIGH TEMP. TOL. 0 °C +55 °C ± 1 %

www.vishay.com Vishay Revision: 30-Aug-16 4 Document Number: 33017 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 - 75 - 50 - 25 0 25 50 75 100 125 150 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.6 1.5 1.7 Temperature in °C Ratio Ratio RT/R25 Max. Min. Max. Min. - 75 - 50 - 25 0 25 50 75 100 150 175 Temperature in °C TCR in ppm/K TCR Typical Value 3600 3700 3800 3900 4000 4100 4200 4300 4400 4600 4500 4800 4700 125

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED