TF120650FM AAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
American Accurate Components, Inc. CHIP TERMINATOR NETWORK – PECL, Fixed, & Power The content of this specification may change without notification 11/18/05
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 Custom solutions are available. HOW TO ORDER T X 1206 50 F M Packaging M = tape/reel 5,000 pcs O = tape/reel 1,000 pcs Tolerance (%) F = + 1% Blank for TF or TP Series Impedance 50Ω or 75Ω Size (SMT) or Max W (Lead Wire) 1206 05 30 1612 12 80 1612A Type F = Fixed Chip Terminator P = High Power Terminator X = PECL Chip Terminator Series C h i p T e r m i n a t o r N e t w o r k PECL Chip Terminator
ELECTRICAL CHARACTERISTICS
Typical Resistance Value R1 ：50 Ω, R2：46.4 Ω, R3：50 Ω Resistance Tolerance ±1.0 % TCR ±50ppm/℃ Power Rating per Element 42mW Power Rating per Package 125mW Max Rated Operating Temp 70 ℃ Operating Temperature -55 ℃ ~ +125℃ Storage Temperature -55 ℃ ~ +125℃ MECHANICAL DIAGRAM PECL Chip Terminator This surface mount chip resistor network is for termination of Positive Emitter Coupled Logic (PECL) circuits EMI/RFI attenuation Reduced board space Better tracking of electrical parameters Fixed Chip Terminator Exhibits high frequency characteristics The surface mount package is ideal for low noise, and parasitic capacitance
applications
The thin film metallization also offer very stable characteristics over temperature and time High-Precision, high-frequency chip resistors Power Chip Terminator The high power thin film terminators exhibit excellent high frequency characteristics Installing on heat sink will allow for operation with her power ratings From 1W to 80W power rating
American Accurate Components, Inc. CHIP TERMINATOR NETWORK – PECL, Fixed, & Power The content of this specification may change without notification 11/18/05 TEL: 949-453-9888 FAX: 949-453-8889 Fixed Chip Terminator Characteristic Impedance 50 Ω 75 Ω 50 Ω 75 Ω 50 Ω 75 Ω DC~3GHz 1.3 DC~10GHz Frequency Range DC~3GHz DC~2GHz DC~3GHz DC~2GHz DC~10GHz TCR ±50ppm/℃ ±50ppm/℃ ±50ppm/℃ Max Rated Operating Temp 70 ℃ 70 ℃ 70 ℃ Operating Temperature -55 ℃ ~ +125℃ -55 ℃ ~ +125℃ -55 ℃ ~ +125℃ MECHANICAL DIAGRAM (mm) ENVIRONMENTAL PERFORMANCE Item Test Condition Requirements Short-time Overload Rated Voltage × 2.5, 5sec. +/- （ 0.2% ＋ 0.05 ohm ） Resistance to Soldering Heat 260 +/- 5 ℃, 10 +/- 1sec. +/- （ 0.2% ＋ 0.05 ohm ） Temperature Cycle -55 ℃ ⇔ ＋125℃, 5 cycles +/- （ 0.2% ＋ 0.05 ohm ） Moisture Load Life 40 +/- 2 ℃ 90 ～ 95%, 1000H +/- （ 0.2% ＋ 0.05 ohm ） Insulation Resistance DC 500V, 1 min. ＞ 1,000 M ohm DERATING CURVE – TX & TF Series For resistors operated at ambient temperature over 70℃, power rating shall be derated in accordance with figure 1. The rated voltage is calculated by the following formula: E= √P * R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value(Ω)
American Accurate Components, Inc. CHIP TERMINATOR NETWORK – PECL, Fixed, & Power The content of this specification may change without notification 11/18/05 TEL: 949-453-9888 FAX: 949-453-8889 High Power Terminator Series TP05 TP12 TP30 TP80 Circuit Schematic Characteristic Impedance 50 Ω 50 Ω 50 Ω 50 Ω Frequency Range DC ~ 10GHz DC ~ 2.1GHz DC ~ 10GHz DC ~ 1.5GHz Typical Power Rating 1W 1W 1.5W 1.5W Max Power Rating 5W 12.5W 30W 80W Max Heat Sink Temp at Max Rated Power 70 ℃ 80 ℃ 70 ℃ 65 ℃ Operating Temperature -55 ℃ ~ +125℃ -55 ℃ ~ +80℃ -55 ℃ ~ +125℃ -55 ℃ ~ +125℃ MECHANICAL DIAGRAM (mm) ENVIRONMENTAL PERFORMANCE Item Power Terminator Series Test Condition Requirements TP12.5, TP80 ± (0.5% + 0.05Ω) Short Time Overload TP05, TP30 Rated Voltage x 2.5, 5 seconds ± (0.2% + 0.05Ω) TP12.5, TP80 250°C ± 5°C, 10 ± 1 second ± (0.5% + 0.05Ω) Resistance to Soldering Heat TP12.5, TP80 235°C ± 5°C, 3 ± 0.5 second >95% Solderability TP05, TP30 TP12.5, TP80 -10°C 30 min, R.T. 3 min 70°C 30 min R.T. 3 min, 5 cycles ± (0.5% + 0.05Ω) Temperature Cycle TP05, TP30 -55°C ~ +125°C, 5 cycles ± (0.2% + 0.05Ω) TP12.5, TP80 40°C ± 5°C, 90~95%, Rated Voltage 90 min on, 30 min off for 1000 hours ± (1.0% + 0.05Ω) Moisture Load Life TP12.5, TP80 40°C ± 2°C, Rated Voltage. 90 min on, 30 min off for 1000 hours ± (1.0% + 0.05Ω) Load Life TP05, TP30 70°C ± 3°C, for 1000 hours ± (0.2% + 0.05Ω) Insulation Resistance TP12.5, TP80, TP05, TP30 DC 500V, 1 minute > 1,000 M Ω