TF1106 TOSHIBA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
TOSHIBA SOLID STATE 1/O INTERFACE MODULE AC INPUT MODULE Unit in mm TOSHIBA TF1106 is AC Line Voltage Input I/O Interface 40MAX. a0 Module and it includes the optical isolator. y Marc | Using this Module, you can design high reliability and 3 ! compact system. “lly 3 456 } vi « Recommended Input Voltage : VIN=80~130V AC = Lonel seo ‘| 2 05 « Input Impedance : Zin =45k0, . ta flue ores e 1500V AC Optical Isolation 1. INPUT (AC) 4. GND 3. INPUT (AC) 5. Vec * Wide Supply Voltage : Voc=5~18V 6. OUTPUT ¢ Including Delay Time Circuit JEDEC am + Output is Compatible with TTL and CMOS Logic EIAT = + Small Size and Light Weight TOSHIBA 10-40A4A Weight : 7g MAXIMUM RATINGS (Ta = 25°C) INPUT (AC LINE VOLTAGE) CHARACTERISTIC SYMBOL RATING UNIT SECT Input Current (AC) Operating Frequency Range 45~65 [| Hz | OUTPUT (LOGIC CONTROL) Logie Supply Voltage veo) _Y Output Voltage Vout _|-0.5~Voct+0.5 Output Current Tour [| 6 sd ma ‘| Isolation Voltage (Input-Output) (AC) BVg/AC Storage Temperature Range —20~80 Lead Soldering Temperature (10s) [ To 260 MARK Module Color Code : Yellow TOSHIBA Type TF1106 Lot No. JAPAN =; PE _ i {Month (Starting from Alphabet A) t Y VEY ‘Year (Last Number of the Christian Era) Color : Yellow 961001842 malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA. products are used within specified Operating ranges as set forth in the most recent products specifications, Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. 1996-12-02 1/2
(4) GND ® outPut|-®) Voc INPUT $ =K DELAY INPUT (AC) TIME [>—H6) OUTPUT ciecuit} | porto | | ciRcuIT ® COUPLER BUFFER ELECTRICAL CHARACTERISTICS (Ta = 25°C, Vcc =5V, f= 50Hz) INPUT (AC LINE VOLTAGE) CHARACTERISTIC SYMBOL TEST CONDITION | aa. | rye. [wax. [unr] Hourl<1zA, Vour>45v_ | — [51 [70 | Input Voltage v Vint |Hourl<1vA, Vour<0.5V | so | so] — | Input Current mA tan [Wourl<1A, Voursosv | — | 1.05 | — | Vin =100V, £=50Hz P= [as] — J xo | OUTPUT (LOGIC CONTROL) IouT==10A, Viy=t00v_— | 4.5 | 49 | — | Output Voltage Vv IouT=2.5mA, VIN=0V | = | 03 | os | Output Current (sink) Jout | VoL=1.5V, Vin=0V [ 6 | i6| — | ma | Toon _|Hourl<izA, Vin=100V | = | 10] 5 | Supply Current mA Tcct.__|Hourl<ivA, Vin=0V |= | i] | Propagation Vin=0—100V [= | 72] 15 | Delay Time Vin=100-0V | — | 60] 15 | Isolation Resistance | Rg _[V=1kv, RH=40~60% [| — [10] — | o | VIN 0 Vou Vv OUT 0 Vou tpLH tpHL Fig.1 SWITCHING TIME TEST CONDITION
961001 EBA2”
© ‘The information contained herein is presented only as a guide, for the applications, of our products. No_ responsibilty is assumed by, TOSHIBA CORPORATION for any infingerments of rncliectual Broperty or ether rights Ef tne third parties wnien may Tesul from Is use. No Neanse is granted by impicaton oF others under ny intelectual propery or other rights of TOSHIBA CORPORATION or eters @ The information contained herein is subject to change without notice 1996-12-02 2/2