TES113YD POWER-ONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
(888) IPD-CONVerters G (888) 473-2668 G www.ipdconverters.com C-52 TES single output DC/DC converters provide up to
225 Watts of output power at up to 45 Amperes of
output current in an industry standard “3/4 brick” package. The TES converters feature open-frame packaging, along with planar magnetics and a high efficiency topology, to provide maximum useable power density. The TES converters use 100% surface- mount construction and are fully compatible with production board washing processes. Planar Magnetics Low Voltage Outputs 1500V Isolation Synchronous Rectification DESCRIPTION FEATURES TES SERIES - 225 WATT 45A “3/4 Brick” Very High Efficiency Open-Frame Packaging 100°C Baseplate Operation TES150ZE-A 10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % EFF. (36v) EFF. (48v) EFF. (75v) Efficiency vs. Load (48V Input) Turn-On Time 10 ms Remote Shutdown Positive Logic Remote Shutdown Reference V in Negative Switching Frequency 5Vout / 3.3V & 2.5Vout 300 kHz / 200 kHz Isolation Input - Output 1500 VDC Input - Case 1050 VDC Output - Case 500 VDC Temperature Coefficient ±0. 02%/°C Case Temperature Operating Range -40 To +100°C Storage Range -40 To +125°C Thermal Shutdown Range 105 to 115°C Vibration, 3 Axes, 5 Min Each5 g, 10 - 55 Hz MTBF † (Bellcore TR-NWT-000332) 1.0 X 10 6 hr s Safety UL, CUL, TUV Weight (Approx.) 3.3 oz General Notes † MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. TECHNICAL SPECIFICATIONS Voltage Range
24 VDC Nominal 18 - 36 VDC
48 VDC Nominal 36 - 72 VDC
Setpoint Accuracy ±1% Line Regulation Vin Min. - Vin Max., Iout Rated 0.2% V out Load Regulation Iout Min. - Iout Max., Vin Nom. 0.5% V out Remote Sense Headroom 0.5 VDC Minimum Output Current 10 % I out Rated Dynamic Regulation, Loadstep 25% I out Pk Deviation 4% V out Settling Time 500 µs Voltage Trim Range ±10% Current Limit Type Latch Current Limit Threshold Range, % of Iout Rated 110 - 140% Short Circuit Threshold Range, % of Iout Rated 200% OVP Trip Range 115 - 140% V out N o m . UVP Trip Range 70 - 90% V out N o m . OVP/UVP Type L atch
2 E nable
3 Case
5 CN2 (opt.) 6 CN1 (opt.) 7 +V out 8 +V out 9 -V out 10 -V out 1 1 -S ense
12 Trim
Inches: (Millimeters) Pin: ± 0.002 ± 0.05 ( Dimensions as listed unless otherwise specified.) Tolerances MECHANICAL DRA WING Pin Function Thermal Impedance Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. Natural Convection 5.7 °C/W 100 LFM 3.9 °C/W 200 LFM 2.6 °C/W 300 LFM 1.9 °C/W 400 LFM 1.7 °C/W Vin (Volts) Vin Range (Volts) Iin Max.* (Amps) Vout (Volts) Iout Rated (Amps) Ripple & Noise Pk-Pk (mV) Efficiency Typ. ** Model 1 8 - 3 6 1 8 - 3 6 1 8 - 3 6 3 6 - 7 2 3 6 - 7 2 3 6 - 7 2 8.0 10.2 14.6 4.0 5.1 7.2 2.5 3.3 2.5 3.3 100 100 100 100 100 100 79% 82% 82% 80% 83% 82% TES113YD-A TES150YE-A TES225YG-A TES113ZD-A TES150ZE-A TES225ZG-A Denotes advanced product release. Consult factory for product availability. * Maximum input current at minimum input voltage, maximum rated output power . ** At nominal Vin, rated output. MODELS - (See the last page of this file for options.) /K2D/K30/K2E/K36/K30/K22/K28/K2D/K31/K35/K2E/K32/K6D/K6D/K29 /K32/K2E/K36/K35/K30/K22/K28/K36/K37/K2E/K33/K6D/K6D/K29 /K2D/K30/K2E/K34/K30/K30/K22/K28/K2D/K31/K30/K2E/K32/K6D/K6D/K29 /K32/K2E/K34/K30/K30/K22/K28/K36/K31/K2E/K30/K6D/K6D/K29 /K32/K2E/K31/K30/K30/K22/K28/K35/K33/K2E/K33/K6D/K6D/K29 /K30/K2E/K39/K30/K30/K22/K28/K32/K32/K2E/K39/K29 /K30/K2E/K36/K30/K30/K22/K28/K31/K35/K2E/K32/K29 /K30/K2E/K33/K35/K30/K22/K28/K38/K2E/K39/K6D/K6D/K29 /K30/K2E/K31/K30/K30/K22/K28/K32/K2E/K35/K6D/K6D/K29 /K2D/K30/K2E/K31/K35/K30/K22/K28/K2D/K33/K2E/K38/K6D/K6D/K29 /K32/K2E/K32/K35/K30/K22/K28/K35/K37/K2E/K32/K6D/K6D/K29 /K31/K2E/K35/K30/K30/K22/K28/K33/K38/K2E/K31/K6D/K6D/K29 /K30/K2E/K37/K35/K30/K22/K28/K31/K39/K2E/K31/K6D/K6D/K29 /K30 /K4D/K33/K58/K2E/K35 /K54/K48/K52/K4F/K55/K47/K48 /K34/K50/K4C /K28/K31/K32/K2E/K37/K6D/K6D/K29 /K28/K30/K2E/K36/K6D/K6D/K29 /K28/K32/K2E/K30/K6D/K6D/K29/K28/K31/K2E/K30/K6D/K6D/K29 /K28/K36/K31/K2E/K30/K6D/K6D/K29 /K28/K38/K37/K2E/K36/K6D/K6D/K29 /K32/K2E/K34/K30/K22 /K33/K2E/K34/K35/K22 /K30/K2E/K31/K38/K22/K28/K34/K2E/K36/K6D/K6D/K29 /K2E/K30/K32/K35/K22/K30/K2E/K35/K30/K22 /K4D/K4F/K55/K4E/K54/K49/K4E/K47 /K49/K4E/K53/K45/K52/K54/K53 /K44/K49/K41 /K30/K2E/K30/K38/K30/K22/K44/K49/K41 /K30/K2E/K30/K34/K30/K22 /K42/K4F/K54/K54/K4F/K4D /K56/K49/K45/K57 /K36 /K35 /K34 /K31/K33 /K31/K32 /K31/K31 /K31/K30 /K39 /K38 /K37 /K33 /K32 /K31 /K28/K2D/K35/K2E/K31/K6D/K6D/K29 /K2D/K30/K2E/K32/K30/K22 /K30 /K28/K32/K35/K2E/K34/K6D/K6D/K29 /K31/K2E/K30/K30/K30/K22 /K28/K33/K30/K2E/K35/K6D/K6D/K29 /K31/K2E/K32/K30/K30/K22 /K28/K35/K30/K2E/K38/K6D/K6D/K29 /K32/K2E/K30/K30/K30/K22
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION SUFFIX APPLICABLE SERIES REMARKS Negative Logic N HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD TTL “Low” Turns Module ON TTL “High” Turns Module OFF Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES Term inal Strip TS XW S, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180” (4.6mm) 0.110” (2.8mm) Pin Length 8 All Units (Except SMS) 0.150” (3.8mm) Pin Length 9 All Units (Except SMS) 0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.