TEP10P5V8D RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
The TEP10P5V8D is an low capacitance TVS designed to protect high speed data interface. It has been specifically designed to protect sensitive electronic components which are connected to data and transmission lines from over -stress caused by ESD. The TEP10P5V8D incorporates one pair of low capacitance steering diodes plus a TVS diode. Device : TEP10P5V8D Material : Halogen free Packing : Tape & Reel Quantity per reel :3 ,000 PCS Flammability Rating : UL 94V-0 Reel size : 7 inch 80W peak pulse power (tp=8/20μs) Low leakage Current and Low Clamping Voltage Working voltage: 5V RoHS compliant Transient protection for high speed data Lines to IEC61000-4-2(ESD)±15kV(air),±10kV (Contact) USB 2.0 and USB 3.0 HDMI 1.3 and HDMI 1.4 SATA and eSATA DVI IEEE 1394 PCI Express Notebooks TEP10P5V8D
DESCRIPTION
ORDERING INFORMATION APPLICATIONS CIRCUIT DIAGRAM SCHEMATIC& PIN CONFIGURATION
FEATURES
e TVS/ESD Protection Diod 2020-02/97 REV:O
Peak pulse power (tp = 8/20μs) Ppk W Peak pulse current (tp = 8/20μs) IPP A ESD according to IEC61000-4-2 air discharge VESD ±15 kV ESD according to IEC61000-4-2 contact discharge ±10 Junction temperature TJ 125 Operating temperature TOP -40~85 Lead temperature TL 260 Storage temperature TSTG -55~150 Electrical Characteristics per line@25℃( unless otherwise specified) Parameter Symbol Conditions Min. Typ. Max. Units Reverse Stand-off Voltage VRWM V Reverse Breakdown Voltage VBR It=1mA 6.0 9.0 V Reverse Leakage Current IR VRWM=5V 100 nA Clamping Voltage VC IPP=1A tp=8/20us I/O pin to Ground V Clamping Voltage VC IPP=4A tp=8/20us Any I/O pin to Ground V Junction Capacitance CJ VR=0V, f = 1MHz Any I/O pin to pin 0.3 0.5 pF Junction Capacitance CJ VR=0V, f = 1MHz Any I/O pin to Ground 0.6 0.8 pF Electronics Parameter Symbol Parameter VRWM Peak Reverse Working Voltage IR Reverse Leakage Current @ VRWM VBR Breakdown Voltage @ IT IT Test Current IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP PPP Peak Pulse Power CJ Junction Capacitance IF Forward Current VF Forward Voltage @ IF ELECTRONICS PARAMETER Electrical Characteristics per line@25 C( unless otherwise specified) o Ordering Information per line@25 C( unless otherwise specified) o
% of Rated Power TL - Lead Temperture(C) Pulse Waveform Power Derating Curve Non repetitive peak pulse power vs. Pulse time 0 5 10 15 20 25 30 100 tp=20us(IPP/2) IPP - Peak Pulse Current - % of IPP t - Time(us) Test Waveform Parameters tf=8us tp=20us 1 10 100 1000 100 1000 10000 Peak pulse power(W) Pulse time (us) RATING AND CHARACTERISTICS CURVES (TEP10P5V8D)
PRODUCT DIMENSION(MSOP10)
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE