TEN06-05S33 P-DUKE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 Issued Date：2008/01/25 OUTPUT SPECIFICATIONS Maximum output power 6 Watts Voltage accuracy Full load and nominal Vin ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation No load to Full load ± 0.5% Ripple and noise 50MHz bandwidth See table Maximum temperature drift ±0.02% / ºC Transient response recovery time 25% load step change 500 μS, typ. Short circuit protection Continuous, automatics recovery Over current protection 150%, typ. OUTPUT VOLTAGE ADJUSTMENT TERMINAL(Vset ) (Note 6) Model number Open -Vout shorted +Vout shorted XXS33 XXS05 XXS12 XXD12 3.3V 12V ±12V 3.67V 15V ±15V 2.84V 4.3V Model number Open -Vout connected with resistance (7) +Vout connected with resistance (7) XXS33 XXS05 XXS12 XXD12 3.3V 12V ±12V 3.3 to 3.67V 5 to 6V 12 to 15V ±12 to ±15V (8-1) (8-3) (8-5) (8-6) 3.3 to 2.84V 5 to 4.3V (8-2) (8-4) GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Input to Output Input (Output) to Case 500 Vac Isolation resistance Input to Output Input (Output) to Case 500VDC 50M ohms Isolation capacitance 300 pF, max. Safety standard pending IEC60950-1, J60950-1, UL60950-1, EN60950-1 Switching frequency Full load to No load 100K to 1500K Hz Case material Metal case Base material None Weight 20.0g (0.71oz) Dimension 1.61 x 1.02 x 0.33 Inch (41 x 25.8 x 8.5 mm) MTBF (Note 1) BELLCORE TR-NWT-000332 MIL-HDBK-217F 3.706 x 10 hrs 1.679 x 10 hrs INPUT SPECIFICATIONS Input voltage range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter L-C filter Input surge voltage 100mS max 5V nominal input 12V nominal input 24V nominal input 48V nominal input 15VDC 36VDC 50VDC 100VDC Remote ON/OFF See figure 1 ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature -25ºC ~ +85ºC (with derating) Maximum case temperature 100ºC Storage temperature range -55ºC ~ +105ºC Cooling Nature convection Thermal shock MIL-STD-810F Vibration At no operation, 10~55~10Hz (sweep for 15min.) amplitude 1.5mm constant (maximum 9G X, Y , Z 2hrs each) Operating humidity range 20% to 95% RH Storage humidity range 20% to 95% RH EMC CHARACTERISTICS EMI (Note 9) EN55022 Class A TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25ºC otherwise noted

FEATURES

  • 6 WATTS MAXIMUM OUTPUT POWER
  • OUTPUT CURRENT UP TO 1200mA
  • PACKAGE, 1.61 x 1.02 x 0.33 INCH
  • HIGH EFFICIENCY UP TO 85%
  • 2:1 WIDE INPUT VOLTAGE RANGE
  • FIVE-SIDED SHIELD
  • SWITCHING FREQUENCY 100K TO 1500KHz.
  • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED
  • LOW RIPPLE & NOISE
  • OVER CURRENT PROTECTION
  • SHORT CIRCUIT PROTECTION
  • LONG LIFE WITHOUT ELECTROLYTIC CAPACITOR
  • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
  • DESIGN MEETS J60950-1, UL60950-1, EN60950-1 AND IEC60950-1
  • ISO9001 CERTIFIED MANUFACTURING FACILITIES
  • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC

DESCRIPTION

The TEN06 series offer 6 watts of output power from a 1.61 x 1.02 x 0.33 inch package without derating to 50ºC and without external input/output capacitor. The TEN06 series with 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 500V AC of isolation, short-circuit protection.

APPLICATIONS

Page 2 of 3 Issued Date：2008/01/25 Output Current Input Current Model Number Input Range Output Voltage Output Voltage Range Min. load Full load Output (2) Ripple&Noise No Load(3) Full Load(2) Eff (4) (%) Capacitor(5) Load max TEN06-05S33 4.5 – 9 VDC 3.3 VDC 2.84 – 3.67 VDC 0mA 1200mA 100mVp-p 80mA 1131mA 74 6600μF TEN06-05S05 4.5 – 9 VDC 5 VDC 4.3 – 6 VDC 0mA 1000mA 100mVp-p 65mA 1370mA 77 3000μF TEN06-05S12 4.5 – 9 VDC 12 VDC 12 – 15 VDC 0mA 500mA 100mVp-p 140mA 1519mA 83 1400μF TEN06-05D12 4.5 – 9 VDC ±12 VDC ±12 – ±15 VDC 0mA ±250mA 100mVp-p 140mA 1519mA 83 ±510μF TEN06-12S33 9 – 18 VDC 3.3 VDC 2.84 – 3.67 VDC 0mA 1500mA 100mVp-p 45mA 573mA 76 6600μF TEN06-12S05 9 – 18 VDC 5 VDC 4.3 – 6 VDC 0mA 1200mA 100mVp-p 55mA 658mA 80 3000μF TEN06-12S12 9 – 18 VDC 12 VDC 12 – 15 VDC 0mA 500mA 100mVp-p 60mA 617mA 85 1400μF TEN06-12D12 9 – 18 VDC ±12 VDC ±12 – ±15 VDC 0mA ±250mA 100mVp-p 55mA 617mA 85 ±510μF TEN06-24S33 18 – 36 VDC 3.3 VDC 2.84 – 3.67 VDC 0mA 1500mA 100mVp-p 15mA 286mA 77 6600μF TEN06-24S05 18 – 36 VDC 5 VDC 4.3 – 6 VDC 0mA 1200mA 100mVp-p 20mA 321mA 82 3000μF TEN06-24S12 18 – 36 VDC 12 VDC 12 – 15 VDC 0mA 500mA 100mVp-p 30mA 309mA 85 1400μF TEN06-24D12 18 – 36 VDC ±12 VDC ±12 – ±15 VDC 0mA ±250mA 100mVp-p 30mA 309mA 85 ±510μF TEN06-48S33 36 – 75 VDC 3.3 VDC 2.84 – 3.67 VDC 0mA 1500mA 100mVp-p 15mA 143mA 77 6600μF TEN06-48S05 36 – 75 VDC 5 VDC 4.3 – 6 VDC 0mA 1200mA 100mVp-p 15mA 165mA 80 3000μF TEN06-48S12 36 – 75 VDC 12 VDC 12 – 15 VDC 0mA 500mA 100mVp-p 20mA 155mA 85 1400μF TEN06-48D12 36 – 75 VDC ±12 VDC ±12 – ±15 VDC 0mA ±250mA 100mVp-p 15mA 155mA 85 ±510μF TEN06-48S05 Efficiency VS Input Voltage 36 40 44 48 52 56 60 64 68 72 INPUT VOLTAGE (V) EFFICIENCY(%) TEN06-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) EFFICIENCY(%) TEN06-48S05 Derating Curve 100 120 -25 0 25 50 75 100 AMBIENT TEMPERATURE(℃) OUTPUT POWER (%) Figure 1 Note: 1. BELLCORE TR-NWT-000332. Case 1:50% Stress, temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. The following output voltage can be obtained by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open. 7. In addition, the voltage can be adjusted not by shorting these terminals, but by connecting them to resistances as shown below. 8. Arithmetic expression connected resistance: R ( KΩ ) 9. The TEN06 series can meet EN55022 Class A with parallel an external capacitor to the input pins. Recommend : 05Vin : 10μF/25V 1210 MLCC 1 2 V i n : 4 . 7 μF/25V 1210 MLCC 24Vin : 3.3μF/50V 1210 MLCC 48Vin : 1.5μF/100V 1812 MLCC

Page 3 of 3 Issued Date：2008/01/25 Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: TEN06-05XXX 22 μF/10V 1210 MLCC TEN06-12XXX 22 μF/25V 1812 MLCC TEN06-24XXX 6.8 μF/50V 1812 MLCC TEN06-48XXX 2.2 μF/100V 1812 MLCC Recommended EN55022 Class B Filter Circuit Layout 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION PIN SINGLE DUAL 1 + INPUT + INPUT

2 CTRL CTRL

4 NC - OUTPUT

6 Vset Vset

8 CASE CASE

9 CASE CASE

10 CASE STAND OFF CASE STAND OFF

11 CASE STAND OFF CASE STAND OFF

Output voltage setting can be externally trimmed by using the method shown below. ( ) for dual output trim 5(4) 6(6) TRIM UP RU TRIM DOWN RD 7(7) 6(7)