TEM5630AN_15 MORNSUN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Signal conditioning modules TEMxxxxAN Series 2014.09.16-A/0 Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Signal conditioning modules
FEATURES
z two-terminal isolation (signal input and output are mutually isolated) z High precision grade (0.1% F .S.) z High linearity (0.1% F .S.) z Isolation voltage (2KV AC/60s) z Extremely low temperature drift (50PPM/℃) z Industrial grade (range of operating temperature: -40℃ to +85℃) z High reliability (MTBF >500,000 hours) z Low ripple & noise: ≤30mVp-p(20MHz) z ESD protection (IEC/EN61000-4-2 Contact ±4KV perf. Criteria B) z Small footprint：DIP Package(26*9.5*12.5mm) z Signal load capacity: ≥2KΩ(@Max. signal output @10V) TEMxxxxAN series is analog signal isolation modules with front-end mV-level positive/negative signal input and rear-end positive signal output. They are equipped with built-in efficient micro-power sour ce can supply other power to the internal circuit of input signal. The product adopts the electromagnetic isolating technology as a substit ute for the traditional linear opto-isolator. In contrast, this type of product has a better performance in temperature drift, linearity, low power consumption and Low ripple. They are two -terminal isolation (input of power supply , signal output and signal output are mutually isolated) Selection Guide Part No. Power Supply input (VDC) Input Signal Output Signal Isolation Power Output (VDC) TEM5630AN 24VDC ±75mV 0~5VDC None TEM6650AN 12VDC ±100mV 0~5VDC None TEM6640AN 15VDC ±100mV 0~5VDC None Input Specifications Item Operating Conditions Value Input Power Supply Input voltage Input nominal ±5% Input power Signal full load ≤1W Power protection Anti-reverse connection protection Input Input signal See selection guide Input impedance in case of max. input of voltage signal ≥10MΩ Over-load Max. over-load voltage ±10VDC Output Specifications Item Operating Conditions Value Output Output signal See selection guide Load capacity Voltage output ≥2KΩ Ripple & noise Bandwidth 20MHz ≤35mVpp Transmission Specifications Item Operating Conditions Value Zero Offset 0.1%F .S. Precision 0.1%F .S. Temperature Drift Operating temperature range of -40 to +85℃≤ 50PPM/℃ bandwidth ≥2KHz Response Time ≤1ms
Signal conditioning modules TEMxxxxAN Series 2014.09.16-A/0 Page 2 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation General Specifications Item Operating Conditions Value Electric Isolation Power input and the signal output are on the common ground. Isolated between signal input terminal and signal output terminal. Degree of Isolation testing for 1 minute, leakage current <1mA, humidity <70% 2KVAC Isolation Resistance 100M Ω, 500VDC (signal input terminal and signal output terminal) Operating Temperature -40℃~+85℃ Transportation and Storage Temperature -50℃~+105℃ Max. Operating Temperature for casing Ta=25℃≤ 55℃ Application Environment The presence of dust, fierce vibration, impulsion and corrosive gas may cause damage to the product Physical Specifications Casing Material WH8100-F [1] Weight 8g(Typ.) Cooling Method Natural cooling EMC Specifications EMS Electrostatic Discharge IEC/EN61000-4-2 Contact ±4KV perf. Criteria B EFT IEC/EN61000-4-4 Signal input port ±1KV(see Fig. 2 for recommended circuit) perf. Criteria B Surge Immunity IEC/EN61000-4-5 Signal input port ±1KV (line-to-ground)(see Fig. 2 for recommended circuit) perf. Criteria B Application Precautions 1. Please read the instructions carefully before use; contact our technical support if you have any problem. 2. Do not use the product in hazardous areas. 3. Use DC power supply for the product and 220V AC power supply is prohibited. 4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment. After-sales service 1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility of failure of internal module, please contact the local representative or our technical support. 2. The warranty period for the product is 3 years as calculated from the date of delivery. If any quality problem occurs under normal use within the warranty period, the product can be repaired or changed for free. Applied circuit See Application Notes for Isolated Transmitter for details. Design Reference 1. Wiring diagram for product application Sout- Sout+ Sin- Sin+ Pin+ - + - + + GND 18 16 11 10 21 8 9 Power supply inpu t Signal outputSignal input COM Pout+ Pout- Fig. 1 Note：16,17,18 pin is the internal test pin, can not have any electrical connection to an external circuit.
Signal conditioning modules TEMxxxxAN Series 2014.09.16-A/0 Page 3 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation 2. Recommended EMC circuit Sin+ Sin- TVS1 Si n+ Sin- Fig. 2 Components Recommended parameters R1 12Ω/2W TVS1 SMBJ5CA 3. For more information please find the application notes on www.mornsun-power.com Dimensions and Recommended Layout Notes: 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58240002; 2. Unless otherwise specified, data in this datas heet should be tested under the conditions of Ta=25 ℃, humidity<75% when inputting nominal voltage and outputting rated load; 3. All index testing methods in this datasheet are based on our Company’s corporate standards; 4. The performance indexes of the product models listed in this datasheet are as above, but some indexes of non-standard model products will exceed the above-mentioned requirements, and please directly contact our technician for specific information; 5. We can provide product customization service; 6. Specifications of this product are subject to changes without prior notice. Mornsun Guangzhou Science & Technology Co., Ltd. Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn