DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate (duty cycle):0.05% Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types Typical IR less than 1µA above 10V High Temperature solderting: 260°C/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability 94V-O Pb-free plated TECC(1000W) Series Mechanical Data Devices For Bipolar Application For Bidirectional use C or CA Suffix for types TECC6.0 thru types TECC440 (e.g. TECC6.0C , TECC440CA) Electrical characteristics apply in both directions Maximum Ratings And Characteristics Ratings at 25 ambient temperature unless otherwise specified.℃ Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 per Fig. 2 .℃ 2.Mounted on 8.0mm x 8.0mm Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,2 ,FIG.1) Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3) Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note2,3) Operating junction and Storage Temperature Range RATING SYMBOL VALUE UNITS P PPM IPPM IFSM T, TJS T G Minimum 1000 SEE TABLE 1 -55 to +150 200 Watts Amps Amps Case: JEDEC DO-214AA. Molded plastic over glass passivated junction Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional 12mm tape (EIA STD RS-481)Standard Packaging: 0.003ounce,0.093gramWeight:

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 2 of 4 Dimensions (DO-214AA)

Electrical Characteristics

TECC6.0A TECC8.0A TECC12A TECC15A TECC16A TECC20A TECC22A TECC26A TECC28A TECC30A TECC33A TECC36A TECC40A TECC58A TECC60A TECC150A TECC170A TECC Part Number Device Marking Code Reverse Stand-Off Voltage V (V) RWM V (V)Min.BR V (V)Max.BR Test Current IT(mA) Maximum Clamping Voltage @Ipp Vc(V) Peak Pulse Current Ipp(A) Reverse Leakage @VRWM I(A )R μUNI-Polar UNI BI-Polar BI 12D 15D 16D 20D 22D 26D 28D 30D 33D 36D 40D 58D 60D 150D 170D 12H 15H 16H 20H 22H 26H 28H 30H 33H 36H 40H 58H 60H 150H 170H 6.0 8.0 12.0 15.0 16.0 20.0 22.0 26.0 28.0 30.0 33.0 36.0 40.0 58.0 60.0 150.0 170.0 6.67 8.89 13.30 16.70 17.80 22.20 24.40 28.90 31.10 33.30 36.70 40.00 44.40 64.40 66.70 167.00 189.00 7.37 9.83 14.70 18.50 19.70 24.50 26.90 31.90 34.40 36.80 40.60 44.20 49.10 71.20 73.70 185.00 209.00 10.3 13.6 19.9 24.4 26.0 32.4 35.5 42.1 45.4 48.4 53.3 58.1 64.5 93.6 96.8 243.0 275.0 174.8 132.4 90.5 73.8 69.2 55.6 50.7 42.8 39.6 37.2 33.8 31.0 27.9 19.2 18.6 7.4 6.5 200 Breakdown Voltage T TECC6.0CA TECC8.0CA TECC12CA TECC15CA TECC16CA TECC20CA TECC22CA TECC26CA TECC28CA TECC30CA TECC33CA TECC36CA TECC40CA TECC58CA TECC60CA TECC150CA TECC170CA For bidirectional type having V of 10 volts and less, the I limit is double. WRM R For parts with A , the V is ±5%BR TABLE1 TECC(1000W) Series 0.086 2.20() 0.073 1.85() 0.180(4.57) 0.160(4.06) 0.155(3.94) 0.130(3.30) Cathode Band DO-214AA(SMB J-Bend) Dimensions in inches and(millimeters) 0.098(2.50) 0.083(2.10) 0.220 5.59() 0.205 5.21() 0.012 0.305() 0.006 0.152() 0.060 1.52() 0.030 0.76() 0.012(0.3)MAX. REV 2017 01 06.. .

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 3 of 4 Characteristic Curves (TA=25 unless otherwise noted)℃ Fig.1 Peak Pulse Power Rating Fig.2 Pulse Derating Cruve Fig.3 Pulse Waveform Fig.4 Typical Junction Capacitance 00 1.0 2.0 4.03.0 10/1000 sec Waveformμ. as defined by R.E.A Half Value IPPM tr=10uS Peak Value I PPM T= 2 5J ℃ Pulse width(td) is defined ad the Point where the Peak Current Decays to 50% of I PPM 100 150 I -Peak Pulse Current(%) IPPM RSM t-Time(mS) td 02 5 5 0 7 5 100 125 150 175 200 100 T -Ambient Temperature( )A ℃Peak Pulse Power(P ) or Current(I ) PP PPM Derating in Percentage,%P -Peak Pulse Power (kW) PPM 0.1μs 10μs 10ms 0.1 100 td - Pulse Width (sec.) 1.0μs 100μs 1.0m s Non-repetitive pulse waveform shown in Fig.3 TA = 25°C C -Junction Capacitance(pF) J 1 10 10010 100 1000 20000 V -Reverse Stand-off Voltage(V)WM 400 V ,Measured atR Stand-Off Voltage,V WM TJ=25 ℃ f=1.0MH Z Vsig=50mVp-p Uni-Directional Bi-Directional Measured at Zero Bias 10000 Copper Pad Areas Fig.5 Typ.Transient Thermal Impedance Fig.6 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only 0.001 0.1 0.1 1 100010 1.0 100 Transient Thermal Impedance(C/W) tp-Pulse Duration(sec) 0.01 100 Peak Forward Surge Current(A) 10 100 100 200 Number of Cycles at 60H Z 8.3mS single half sine-wave (JEDEC Method) T= T m a x . JJ TECC(1000W) Series REV 2017 01 06.. .

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 4 of 4 Marking Code Tape And Reel Specification Recommended Soldering Conditions Recommended Conditions Reflow Soldering ts tP tL Time time to peak temperature (t 25 to peak)℃ Temperature T (min)s T (max)s TL TP Preheat Ramp-down Ramp-up Critical Zone Tt o TLP Re”ow Condition Pb-Free assembly (see Fig.1) Pre Heat -Temperature Min(T ) s(min) -Temperature Max(T ) s(max) -Time(Min to Max)(t ) s Average ramp up rate (Liquidus Temp(T ) to peak)L T to T -Ramp-up Rates(max) L Re”ow -Temperature(T )(Liquidus)L -Temperature(t )L Peak Temp(T )P Time within 5 of actual Peak Temp(t )℃ P Ramp-down Rate Time 25 to Peak Temp(T )℃ P Do not exceed +150 ℃ +200 ℃ 60-180secs 3 /sec.Max.℃ 3 /sec.Max.℃ +217 ℃ 60-150secs +260(+0/-5) ℃ 30 secs.Max. 6 /sec.Max.℃ 8 min.Max. +260 ℃ Cathode Band 6 D ** Marking Code Logo Date Code 6 H Marking Code Logo Date Code TECC(1000W) Series 0.157 (4.0) 0.47 (12.0) 0.314 (8.0) 0.49 (12.0) Symbol Ea Per Reel REEL DIA (mm) Industry Standard TECC* 3000 330 EIA RS-481 13.0(330) REV 2017 01 06.. .