DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional types Typical IR less than 1µA above 10V High Temperature solderting: 260°C/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability 94V-O Pb-free plated TECB(600W) Series Mechanical Data Devices For Bipolar Application For Bidirectional use C or CA Suffix for types TECB6.0 thru types TECB440 (e.g. TECB6.0C , TECB440CA) Electrical characteristics apply in both directions Maximum Ratings And Characteristics Ratings at 25 ambient temperature unless otherwise specified.℃ Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 per Fig. 2 .℃ 2.Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,2 ,FIG.1) Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3) Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note2,3) Operating junction and Storage Temperature Range RATING SYMBOL VALUE UNITS P PPM IPPM IFSM T, TJS T G Minimum 600 SEE TABLE 1 -55 to +150 100 Watts Amps Amps Case: JEDEC DO-214AC. Molded plastic over glass passivated junction Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional 12mm tape (EIA STD RS-481)Standard Packaging: 0.002ounce,0.061gramWeight:

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 2 of 4 Dimensions (DO-214AC)

Electrical Characteristics

TECB(600W) Series Cathode Band 0.065 1.65() 0.049 1.25() 0.185(4.70) 0.157(3.99) 0.112(2.85) 0.094(2.40) 0.090(2.29) 0.078(1.98) 0.208 5.28() 0.185 4.70() 0.012 0.305() 0.006 0.152() 0.060 1.52() 0.030 0.76() DO-214AC(SMA J-Bend) Dimensions in inches and(millimeters) 0.008(0.203)MAX. TECB6.0A TECB8.0A TECB12A TECB15A TECB16A TECB20A TECB22A TECB26A TECB28A TECB30A TECB33A TECB36A TECB40A TECB58A TECB60A TECB150A TECB170A TECB440A TECB Part Number Device Marking Code Reverse Stand-Off Voltage V (V) RWM V (V)Min.BR V (V)Max.BR Test Current IT(mA) Maximum Clamping Voltage @Ipp Vc(V) Peak Pulse Current Ipp(A) Reverse Leakage @VRWM I( A )R μUNI-Polar UNIBI-Polar BI 12G 15G 16G 20G 22G 26G 28G 30G 33G 36G 40G 58G 60G 150G 170G 440G 12F 15F 16F 20F 22F 26F 28F 30F 33F 36F 40F 58F 60F 150F 170F 440F 6.0 8.0 12.0 15.0 16.0 20.0 22.0 26.0 28.0 30.0 33.0 36.0 40.0 58.0 60.0 150.0 170.0 440.0 6.67 8.89 13.30 16.70 17.80 22.20 24.40 28.90 31.10 33.30 36.70 40.00 44.40 64.40 66.70 167.00 189.00 492.00 7.37 9.83 14.70 18.50 19.70 24.50 26.90 31.90 34.40 36.80 40.60 44.20 49.10 71.20 73.70 185.00 209.00 543.00 10.3 13.6 19.9 24.4 26.0 32.4 35.5 42.1 45.4 48.4 53.3 58.1 64.5 93.6 96.8 243.0 275.0 713.0 70.0 52.9 36.2 29.5 27.7 22.2 20.3 17.0 15.9 14.9 13.5 12.4 11.2 7.7 7.4 3.0 2.6 1.0 100 Breakdown Voltage T TECB6.0CA TECB8.0CA TECB12CA TECB15CA TECB16CA TECB20CA TECB22CA TECB26CA TECB28CA TECB30CA TECB33CA TECB36CA TECB40CA TECB58CA TECB60CA TECB150CA TECB170CA TECB440CA For bidirectional type having V of 10 volts and less, the I limit is double. WRM R For parts with A , the V is ±5%BR TABLE1 REV 2017.. 03 01.

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 3 of 4 Characteristic Curves (TA=25 unless otherwise noted)℃ Fig.1 Peak Pulse Power Rating Fig.2 Pulse Derating Cruve Fig.3 Pulse Waveform Fig.4 Typical Junction Capacitance 00 1.0 2.0 4.03.0 10/1000 sec Waveformμ. as defined by R.E.A Half Value IPPM tr=10uS Peak Value I PPM T= 2 5J ℃ Pulse width(td) is defined ad the Point where the Peak Current Decays to 50% of I PPM 100 150 I -Peak Pulse Current(%)PPM t-Time(mS) td 02 5 5 0 7 5 100 125 150 175 200 100 T -Ambient Temperature( )A ℃Peak Pulse Power(P ) or Current(I ) PP PPM Derating in Percentage,% Copper Pad Areas C -Junction Capacitance(pF) J 1 10 10010 100 1000 6000 V -Reverse Stand-off Voltage(V)WM V ,Measured atR Stand-Off Voltage,V WM 200 TJ=25 ℃ f=1.0MH Z Vsig=50mVp-p Measured at Zero Bias Uni-Directional Bi-Directional P -Peak Pulse Power (kW) PPM 0.1μs 10μs 10ms 0.1 100 td - Pulse Width (sec.) 1.0μs 100μs 1.0ms Fig.5 Typ.Transient Thermal Impedance Fig.6 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only 0.001 0.1 0.1 1 100010 1.0 100 Transient Thermal Impedance(C/W) tp-Pulse Duration(sec) 0.01 100 Peak Forward Surge Current(A) 10 100 100 200 Number of Cycles at 60H Z 8.3mS single half sine-wave (JEDEC Method) Unidirectional Only Non-repetitive pulse waveform shown in Fig.3 TA = 25°C TECB(600W) Series REV 2017. .03 01.

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI www.spsemi.cn Page 4 of 4 Marking Code Tape And Reel Specification Recommended Soldering Conditions Recommended Conditions Reflow Soldering ts tP tL Time time to peak temperature (t 25 to peak)℃ Temperature T (min)s T (max)s TL TP Preheat Ramp-down Ramp-up Critical Zone Tt o TLP Re”ow Condition Pb-Free assembly (see Fig.1) Pre Heat -Temperature Min(T ) s(min) -Temperature Max(T ) s(max) -Time(Min to Max)(t ) s Average ramp up rate (Liquidus Temp(T ) to peak)L T to T -Ramp-up Rates(max) L Re”ow -Temperature(T )(Liquidus)L -Temperature(t )L Peak Temp(T )P Time within 5 of actual Peak Temp(t )℃ P Ramp-down Rate Time 25 to Peak Temp(T )℃ P Do not exceed +150 ℃ +200 ℃ 60-180secs 3 /sec.Max.℃ 3 /sec.Max.℃ +217 ℃ 60-150secs +260(+0/-5) ℃ 30 secs.Max. 6 /sec.Max.℃ 8 min.Max. +260 ℃ Cathode Band 6 G ** Marking Code Logo Date Code 6 F Marking Code Logo Date Code TECB(600W) Series 0.157 (4.0) 0.47 (12.0) 0.157 (4.0) 0.49 (12.4) Symbol Ea Per Reel REEL DIA (mm) Industry Standard TECB* 5000 330 EIA RS-481 13.0(330) REV 2017.. 03 01.