TCUA2221WBG TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • Operating voltage :V CC = 2.3 ~ 3.6 V
  • ON-capacitance (D+, D-) : C I/O = 7pF Switch On (typ.) ＠ VCC = 3.3 V
  • ON-resistance (D+, D-) : R ON = 5.5 Ω (typ.)＠VCC = 3 V, VIS = 0 V
  • ON-resistance (R, L) : R ON = 4.5 Ω (typ.)＠VCC = 3 V, VIS = 0 V
  • RON Flatness(R, L) : R ON Flatness = 2 Ω(typ.)＠VCC = 3 V
  • ESD performance : Machine model ≥ ± 200V Human body model ≥ ± 2000V
  • Package : WCSP10B(1.2mm x 1.6mm) Pin Assignment (top view) TCUA221WBG, TCUA2221WBG S-UFBGA10-0202-0.40-001 Weight S-UFBGA10-0202-0.40-001 : 0.0025 g (typ.) 1 2 3 A D+ V CC V BUS B D − No Ball COM+ C R No Ball COM − D L GND Cont A B C D 1 2 3

TCUA221WBG,TCUA2221WBG 2012-01-23 2 Marking TCUA221WBG TCUA2221WBG Truth Table Inputs Cont Vbus Function H or L 5V COM+ port = D+ port ，COM− port = D− port L L or Open COM+ port = R port ，COM− port = L port H L or Open Disconnnect System Diagram TCUA221WBG 1MΩ COM+ D+ R COM− D− VBUS Cont L Control Circuit A B C D 1 2 3 Part No. (or abbreviation code) INDEX Lot Cord A B C D 1 2 3 Part No. (or abbreviation code) INDEX Lot Cord

TCUA221WBG,TCUA2221WBG 2012-01-23 3 TCUA2221WBG RP : Pop Sound Eliminator Resistor 1MΩ COM+ D+ R COM− D− VBUS Cont L Control Circuit RP RP

TCUA221WBG,TCUA2221WBG 2012-01-23 4 Absolute Maximum Ratings (Note) Characteristic Symbol Rating Unit Power supply range VCC −0.5 to 4.6 V Cont −0.5 to 4.6 Control pin input voltage VBUS VIN −0.5 to 6.0 V D+,D− −0.5 to VCC+0.5 L,R −2.0 to VCC+0.5 (Note −0.5 ≤ V CC − VS ≤ 6 )Swtich ON COM+,COM- −2.0 to VCC+0.5 (Note −0.5 ≤ V CC − VS ≤ 6 ) D+,D− −0.5 to 4.6 L,R −0.5 to 4.6 Switch I/O voltage Swtich OFF or VCC=0V COM+,COM− VS −2.0 to 4.0 V Switch I/O current IS 50 mA Power dissipation PD 180 mW DC VCC/GND current ICC/IGND ±100 mA Storage temperature Tstg −65 to 150 °C Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Operating Ranges (Note) Characteristic Symbol Rating Unit Power supply voltage VCC 2.3 to 3.6 V Cont 0 to 3.6 Control pin input voltage VBUS VIN 0 to 5.5 V USB(D+/D-) 0 to VCC Audio(L/R) −1.5 to VCC Switch ON COM+/COM- −1.5 to VCC USB(D+/D-) 0 to 3.6 Audio(L/R) 0 to 3.6 Switch I/O voltage Switch OFF or VCC = 0V COM+/COM- VS −1.5 to 3.6 V Operating temperature Topr −40 to 85 °C Input rise and fall time dt/dv 0 to 10 ns/V Note: The operating ranges must be maintained to ensure the normal operation of the device.Unused inputs must be tied to either VCC or GND.

TCUA221WBG,TCUA2221WBG 2012-01-23 5

Electrical Characteristics

DC Characteristics (Ta = −40 to 85°C) Parameter Symbol Test Condition VCC (V) Min. Typ. Max. Unit High-level input voltage V BUS VIH ⎯ 2.3 to 3.6 VCC + 0.6 ⎯ ⎯ Low-level input voltage V BUS V IL ⎯ 2.3 to 3.6 ⎯ ⎯ VCC − 0.5 2.3 to 2.5 0.50 × VCC ⎯ ⎯ 2.7 to 3.0 0.45 × VCC ⎯ ⎯ High-level input voltage Cont VIH ⎯ 3.3 to 3.6 0.40 × VCC ⎯ ⎯ Low-level input voltage Cont V IL ⎯ 2.3 to 3.6 ⎯ ⎯ 0.15 × VCC V VBUS IIN VIN = 0 to 5.5 V 2.3 to 3.6 ⎯ ⎯ ±10 μA Input leakage current Cont I IN VIN = 0 to 3.6 V 2.3 to 3.6 ⎯ ⎯ ±1 μA D+,D− I OFF V IN = 0 to 3.6 V 0 ⎯ ⎯ ±10 μ A UA221 ⎯ ⎯ ±10 R,L I OFF V IN = 0 to 3.6 V UA2221 -60 ⎯ 120 μA Power-off leakage current COM+, COM− IOFF V IN = -1.5 to 3.6 V 0 ⎯ ⎯ ±10 μ A D+,D− I SZ V IS = 0 to VCC, Switch OFF 2.3 to 3.6 ⎯ ⎯ ±10 μA UA221 ⎯ ⎯ ±10 R,L, I SZ V IS = 0 to VCC, Switch OFF UA2221 2.3 to 3.6 -60 ⎯ 120 μA Off-state leakage current (switch off) COM+, COM− I SZ V IS = -1.5 to VCC, Switch OFF 2.3 to 3.6 ⎯ ⎯ ±10 μA VBUS = 4.25 V, VIS = 0 V, IIS = 30 mA (Note) 3.0 ⎯ 5.5 10 VBUS = 4.25 V, VIS = 1.0 V, IIS = 30 mA (Note) 3.0 ⎯ 6.5 12 D+,D− R ON VBUS = 4.25 V, VIS = 3.0 V, IIS = 30 mA (Note) 3.0 ⎯ 22 40 VIS = −1.0 V, IIS = 30 mA (Note) 3.0 ⎯ 4.0 8 VIS = 0V, IIS = 30 mA (Note) 3.0 ⎯ 4.5 9 ON-resistance R,L R ON VIS = 1.0 V, IIS = 30 mA (Note) 3.0 ⎯ 6.0 11 ON-resistance Flatness R,L R FLAT(ON) V IS = -1.0V to 1.0V, IIS = 30 mA (Note) 3.0 ⎯ 2.0 ⎯ Ω ICC VIN (Cont) = VCC or GND, VBUS =0V or 5V , IOUT = 0 A 3.6 ⎯ ⎯ 2 μA 3.6 ⎯ ⎯ 40 Quiescent supply current ΔICC V IN (Cont) = 1.8V 2.7 ⎯ ⎯ 10 μA Pop Sound Elimator Resistor R P V IS = 0 to VCC, IIS = 30 mA (Note) UA2221 3.6 ⎯ 50 ⎯ Ω Note: All typical values are at Ta = 25°C.

TCUA221WBG,TCUA2221WBG 2012-01-23 6 AC Characteristics (Ta = −40 to 85°C) Characteristics Symbol Test Condition VCC (V) Min. Typ. Max. Unit Propagation Delay Time (Note) tPLH, tPHL CL=5pF, See Fig. 1 3.3 ± 0.3 ⎯ 0.25 ⎯ ns Turn ON Time (Cont, VBUS to Output) ton RL=50Ω, CL=5pF See Fig. 2 Turn OFF Time (Cont, V BUS to Output) toff RL=50Ω, CL=5pF See Fig. 2 Break Before Make TBBM RL=50Ω, CL=5pF See Fig. 3 3.3 ± 0.3 2.0 ⎯ 15 ns Note: This parameter is guaranteed by design. Analog Switch Characteristics (Ta = 25°C) Characteristics Symbol Test Condition VCC (V) Min. Typ. Max. Unit D+,D- RT=50Ω, f=240MHz See Fig. 4 3.3 ± 0.3 ⎯ -36 ⎯ Off Isolation (Non-Adjacent) R,L OIRR RT=50Ω, f=20kHz See Fig. 4 3.3 ± 0.3 ⎯ -72 ⎯ dB D+,D- RT=50Ω, f=240MHz See Fig. 5 3.3 ± 0.3 ⎯ -36 ⎯ Crosstalk (Non-Adjacent) R,L X talk RT=50Ω, f=20kHz See Fig. 5 3.3 ± 0.3 ⎯ -84 ⎯ dB -3dB Bandwidth D+,D- BW RT=50Ω,CL=0pF See Fig. 6 3.3 ± 0.3 ⎯ 720 ⎯ MHz Sine Wave Distortion R,L T.H.D VIN = 2Vp-p, Note: This parameter is guaranteed by design. Capacitive Characteristics (Ta = 25°C) Characteristics Symbol Test Condition VCC (V) Typ. Unit VBUS 3.3 20 Control pin input capaci tance Cont CIN V IN = 0 V 3.3 4 pF D+,D- V I/O = 0 V, VBUS=GND or open 3.3 3 L,R V I/O = 0 V, Cont=VCC 3.3 3.5 Switch terminal Off capacitance COM+,COM- C I/O VI/O = 0 V, VBUS=GND or open, Cont=VCC 3.3 4 pF D+,D- V I/O = 0 V, VBUS=4.25V 3.3 7 Switch terminal On capacitance L,R C I/O VI/O = 0 V, VBUS=GND or open, Cont=GND 3.3 8 pF Note: This parameter is guaranteed by design.

TCUA221WBG,TCUA2221WBG 2012-01-23 7 ACTEST Circuit Load / Waveform Head,Man Figure1 Propagati on Delay Time (tPLH, tPHL) VOL VOH 0.4V 0.8V 50% 50% tPLH tPHL Input (COM+, COM-) Output (D+, D-) 50% 50% Figure2 Turn ON / Turn OFF (t on toff) Output CL COM+, COM- D+, D- Control GND R, L CL VBUS5V VCC Input VOL VOH 1.8V 50% ton toff Input (VBUS or Head or Man) Output (D+, D-, R, L) 90% 50% 90% Output CL COM+, COM- D+, D- Control RL R,L CL RL VBUS Head, Man VCC VCC Input

TCUA221WBG,TCUA2221WBG 2012-01-23 8 Figure 3 Break Before Make (TBBM) VOL VOH TBBM Input (VBUS) Output (COM+,COM-) 90% 90% TBBM 90% 90% Output CL COM+, COM- D+, D- Control RL GND R, L VBUS VCC Input 0.8V Head,Man

TCUA221WBG,TCUA2221WBG 2012-01-23 9 VBUS,Cont H or L VBUS,Cont H or L Figure4 OFF Isolation Figure5 Crosstalk Figure6 -3dB BandWidth 50Ω COM+, COM- D+ or R, D− or L Control 50Ω GND R or D+, L or D− VCC 50Ω Source Signal Network Analyzer 50Ω Cont COM+, COM- D+, D- Control 50Ω GND R, L VBUS VCC 50Ω Source Signal Network Analyzer COM+ D+ or R Control 50Ω GND R or D+ VCC 50Ω Source Signal Network Analyzer COM- D- or L L or D-

TCUA221WBG,TCUA2221WBG 2012-01-23 10 Package Dimension S-UFBGA10-0202-0.40-001 Unit:mm The resin used in this product includes no flame retardants. Weight: 0.0025g (Typ.)

TCUA221WBG,TCUA2221WBG 2012-01-23 11 RESTRICTIONS ON PRODUCT USE

  • Toshiba Corporation, and its subsidiaries and affiliates (collect ively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice.
  • This document and any information herein may not be reproduc ed without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
  • Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
  • Product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document.
  • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
  • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
  • The information contained herein is pres ented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
  • A BSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
  • Do not use or otherwise make available Product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
  • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.