TCSS1100 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Features

/C0068 Output: ‘LOW’ when infrared beam is not interrupted /C0068 Inverter-open collector /C0068 TTL compatible /C0068 Built-in voltage regulator /C0068 Plastic polycarbonate case, protected against ambient light /C0068 No adjustment necessary /C0068 Two package variations 15132 _ + VO 95 10821 7.6 0.3” Top view Handling Precautions Connect a capacitor C of more than 100 nF between VS1 and ground in order to stabilize power supply voltage! Order Instruction Ordering Code Resolution (mm) / Aperture (mm) Remarks TCSS1100 A) 0.6 / 1.0 No mounting flags TCSS2100 B) 0.6 / 1.0 With two mounting flags

www.vishay.com 2 (7) Rev. A4, 08–Jun–99 Document Number 83761 Absolute Maximum Ratings Input (Emitter) Parameter Test Conditions Symbol Value Unit Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tp ≤ 10/C0109 s IFSM 3 A Power dissipation Tamb ≤ 25/C0176 C PV 100 mW Junction temperature Tj 100 /C0176 C Output (Detector) Parameter Test Conditions Symbol Value Unit Supply voltages VS1 6.5 V VS2 18 V Output current IO 20 mA Power dissipation Tamb ≤ 25/C0176 C PV 250 mW Junction temperature Tj 100 /C0176 C Coupler Parameter Test Conditions Symbol Value Unit Total power dissipation Tamb ≤ 25/C0176 C Ptot 250 mW Ambient temperature range Tamb –25 to +85 /C0176 C Storage temperature range Tstg –40 to +100 /C0176 C Soldering temperature 2 mm from case, t ≤ 5 s Tsd 260 /C0176 C Electrical Characteristics (Tamb = 25°C) Input (Emitter) Parameter Test Conditions Symbol Min. Typ. Max. Unit Forward voltage IF = 50 mA VF 1.25 1.6 V Junction capacitanceVR = 0, f = 1 MHz C j 50 pF Output (Detector) Parameter Test Conditions Symbol Min. Typ. Max. Unit Supply voltage range VS1 4.75 5.25 V VS2 4.0 16 V Coupler Parameter Test Conditions Symbol Min. Typ. Max. Unit Supply current VS1 = 16 V IS1 3 5 mA Output current VS1 = VS2 = 16 V, IF = 0 IOH 1 /C0109 A Input threshold currentVS1 = 5 V IFT 5 10 mA Hysteresis VS1 = 5 V IFoff/IFon 80 % Output voltage IOL = 16 mA, IF ≥ ITF, VS1 = 5 V VOL 0.15 0.4 V Switching frequency IF 3x IFT, VS1 = VS2 = 5 V, R L = 1 k/C0087 fsw 200 kHz

5 (7) www.vishay.comDocument Number 83761 Rev. A4, 08–Jun–99 Dimensions of TCSS1100 in mm 96 12096

www.vishay.com 6 (7) Rev. A4, 08–Jun–99 Document Number 83761 Dimensions of TCSS2100 in mm 96 12097

7 (7) www.vishay.comDocument Number 83761 Rev. A4, 08–Jun–99 Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P .O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423