TCSD SAMTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

NO. PINS PER ROW - END OPTION - OVERALL LENGTH - 01 - PLATING OPTION - N - OTHER OPTION TCSD = Socket Strip –04, –05, –07, –08, –10, –12, –13, –15, –17, –20, –22, –25 (Standard sizes) = Single End = Double End –“XX.XX” = Assembled Length Leave blank for standard plating 30 µ" (0.76 µm) Gold on contact area = Gold flash on contact = Notch Polarization –P “XX” = Position Polarization (Specify “XX” as position number. Same position will be polarized on both ends) –B “XX” = Breakout (Specify “XX” as number of conductors to be broken out) –RW = Reverse Wiring (Blue or black wire opposite position #1) –D “XX” = Daisy Chain –SR = Strain Relief (Not available with –O, –M, –R, –DXX or –BXX) = Reverse = Middle Reverse (Requires –DXX) = Outside Reverse (Requires –DXX) SPECIFICATIONS Insulator Material: Black Glass Filled Polyester Contact: BeCu Plating: Au or Sn over 50 µ" (1.27 µm) Ni Wire:

28 AWG 7/36 Stranded,

Tinned, Copper with Gray PVC Insulator Current Rating (TCSD/STMM):

2.8 A per pin

(2 pins powered) Operating Temp Range: -40 °C to +105 °C Lead Size Accepted: (0.48 mm) .019" to (0.53 mm) .021" Insertion Depth: (2.87 mm) .113" to (3.17 mm) .125" TCSD Mates: TMM, TMMH, STMM, MMT, TW, MTMM, EHT, ETMM (-SR), ZSTMM Note: TCSD Series assemblies are non-standard, non-returnable. POLARIZING KEY Specify PK-01-07 for polarizing key (Available in wheels of six each). Also polarizes SMM Series socket strips. (5.08) .200 (4.00) .158 Other sizes Other platings ALSO AVAILABLE MOQ Required Single End (—S) Double End (—D) Double Row Connectors Outer Most (End of assembly) min. 4" minimum “XX” 1/8" Daisy Chain (—D “XX”) No. of positions x Strain Relief (—SR) Middle Reverse (—M)Reverse —R) Outside Reverse (—O) Reverse Wiring (—RW) Assembled Length (—“XX.XX”) Position Polarization (—P “XX”) “XX” 5"max. 2"min. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. Breakout (—B “XX”) Assembled Length in INCHES (±1/8") 1 inch minimum TIGER EYE™ IDC SOCKET CABLE (2.00 mm) .0787" PITCH • TCSD SERIES samtec.com?TCSD Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. TIGER EYE IDC F-221