TCRB10145F TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Rev 1: 05 -07 -2019 Power Inductor SMD (10.10 X 10.10 X 4.50 mm)

FEATURES

  • High heat resistance, ideal for reflow • Halogen Free RoHS compliant
  • High Current Capacity / Low DCR • Magnetically shielded SPECIFICATION Part No. Inductance (µH ±20%) DC Res.(Ω ±20%) IDC TCRB10145F -100M 10 0.0384 2.50 TCRB10145F -150M 15 0.0472 2.20 TCRB10145F -220M 22 0.0591 1.90 TCRB10145F -330M 33 0.0815 1.60 TCRB10145F -470M 47 0.100 1.40 TCRB10145F -680M 68 0.140 1.20 TCRB10145F -101M 100 0.200 1.00 TCRB10145F -151M 150 0.350 0.79 TCRB10145F -221M 220 0.470 0.65 TCRB10145F -331M 330 0.680 0.54 TCRB10145F -471M 470 1.030 0.47 TCRB10145F -681M 680 1.500 0.38 TCRB10145F -102M 1000 2.800 0.29 TCRB10145F -152M 1500 3.400 0.22
  • IDC: Isat Irms
  • Measurement frequency of Inductance value : at 1KHz, 0.25V
  • Test equipment: CH1062A / CH1320 CH16502 SCHEMATIC mm A 10.10 ±0.30 C 3.00 ±0.10 D 4.50 ±0.30 E 5.00 REF F 2.00 REF DIMENSION SOLDER PATTERN

Rev 1: 05 -07 -2019 REEL DIMENSIONS (500 pcs per reel) mm W1 24.00±0.3 I 1.75±0.1 F 11.50±0.1 P0 4.00±0.1 G 2.00±0.1 P1 16.00±0.1 C 10.80±0.1 t0 0.35±0.05 D 10.80±0.1 H 4.80±0.1 mm W 330±1.5 D 21.5+0.5/ -0 C 13+0.5/ -0.2 T1 24.5+0.5/ -0 N 100±1.5 T2 29.5±0.4 E 2.00±0.5

Rev 1: 05 -07 -2019 1.Operating temperature range -40 TO + 105°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommended reflow) 11. Storage environment Temperature: 0°C~35°C; -40°C~105°C (after mounting on PCB) Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. RELIABILITY TEST LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW