DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Automotive Conductive Polymer Chip Capacitors TCQ Type B Case Size See table above 476 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) M Tolerance M = ±20% 006 Rated DC Voltage 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc HOW TO ORDER Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel Technical Data: All technical data relate to an ambient temperature of +25°C Capacitance Range: 4.7 μF to 220 μF Capacitance Tolerance: ±20% Leakage Current DCL: 0.1CV Temperature Range: -55°C to +125°C Reliability: 1% per 1000 hours at 85°C, V R with 0.1Ω/V series impedance 60% confidence level Meets requirements of AEC-Q200 (for humidity 85°C/85%RH, VR details see reference table) TECHNICAL SPECIFICATIONS 0070 ESR in mΩ

FEATURES

  • Conductive polymer electrode
  • Benign failure mode under recommended use conditions
  • Robust design for automotive applications
  • Meets requirements of AEC-Q200
  • Humidity 85°C/85%RH, Vr, (up to 500 or 1000 hours see reference table)
  • Basic reliability 1%/1000hrs@85°C Vr with 60% confidence level
  • -55 to +125°C operation temperature
  • Full voltage range: 4-35V
  • DCL 0.1 CV
  • 3x reflow 260°C compatible

APPLICATIONS

  • Automotive, DC/DC converters, Telecommunications, Industrial Reference AVX polymer guide for more information. LEAD-FREE COMPATIBLE COMPONENT B, D, Y CASE XXXXX 686 A AVX LOGO Polymer Capacitance Value in pF 686 = 68µF Rated Voltage A = 10V ID Code Polarity Band (Anode+) MARKING CASE DIMENSIONS:millimeters (inches) W1 dimension applies to the termination width for A dimensional area only. AVX's qualification of TCQ capacitors meets requirements of AEC-Q200. TCQ series is manufactured in an ISO TS 16949 certified facility.

Automotive Conductive Polymer Chip Capacitors Case Capacitance Rated DCL DF ESR 100kHz RMS Current (mA) Humidity AVX Part No. Size (μF) Voltage (μA) % Max (mΩ) MSL 25ºC 85ºC 105ºC 125ºC 85°C/85%RH, (V) Max Max @100kHz Vr (hrs)

4 Volt @ 105°C

TCQD227M004#0025 D 220 4 88 6 25 3 3000 2100 1350 750 1000 TCQY227M004#0025 Y 220 4 88 6 25 3 2720 1904 1224 680 500

6.3 Volt @ 105°C

TCQB226M006#0070 B 22 6.3 13.2 6 70 3 1336 935 601 334 500 TCQB336M006#0070 B 33 6.3 19.8 6 70 3 1336 935 601 334 500 TCQB476M006#0070 B 47 6.3 28.2 6 70 3 1336 935 601 334 500 TCQD157M006#0025 D 150 6.3 90 6 25 3 3000 2100 1350 750 1000 TCQD157M006#0040 D 150 6.3 90 6 40 3 2372 1660 1067 593 1000

10 Volt @ 105°C

TCQD686M010#0025 D 68 10 68 6 25 3 3000 2100 1350 750 1000 TCQD686M010#0040 D 68 10 68 6 40 3 2372 1660 1067 593 1000 TCQD107M010#0025 D 100 10 100 6 25 3 3000 2100 1350 750 1000 TCQD107M010#0040 D 100 10 100 6 40 3 2372 1660 1067 593 1000

16 Volt @ 105°C

TCQD336M016#0070 D 33 16 52.8 6 70 3 1793 1255 807 448 1000 TCQD476M016#0070 D 47 16 75.2 6 70 3 1793 1255 807 448 1000

20 Volt @ 105°C

TCQD226M020#0070 D 22 20 44 6 70 3 1793 1255 807 448 1000

25 Volt @ 105°C

TCQD156M025#0070 D 15 25 37.5 6 70 3 1793 1255 807 448 1000

35 Volt @ 105°C

TCQD106M035#0070 D 10 35 35 6 70 3 1793 1255 807 448 1000 Capacitance Rated Voltage DC (VR) @ 105°C μF Code 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 3.3 335 4.7 475 B(200)* 6.8 685 B(200)* 10 106 B(200)* D(70) 15 156 D(70) 68 686 D(25,40) 100 107 D(25,40) 150 157 D(25,40) 220 227 D(25), Y(25) CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Available Ratings, (ESR ratings in mOhms in brackets) *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same re liability standards. RATINGS & PART NUMBER REFERENCE Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 218. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same rel iability standards.

Automotive Conductive Polymer Chip Capacitors TEST TCQ series (Temperature range -55ºC to +105ºC/125ºC) Condition Characteristics Visual examination no visible damage DCL 2 x initial limit Endurance ΔC/C within +10/-20% of initial value for V r ≤ 10V within +20/-30% of initial value for V r ≥ 16V DF 2 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 2x initial limit Storage Life ΔC/C within +10/-20% of initial value for V r ≤ 10V within +20/-30% of initial value for V r ≥ 16V DF 2 x initial limit ESR 2 x initial limit Visual examination no visible damage Biased DCL 2 x initial limit Humidity ΔC/C within +35/-5% of initial value DF 1.5 x initial limit ESR 2 x initial limit +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC Temperature DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL* Stability ΔC/C n/a ±20% ±5% ±20% ±30% ±5% DF IL* IL* IL* 1.2 x IL* 1.5 x IL* IL* Visual examination no visible damage DCL initial limit ΔC/C within +10/-20% of initial value for V r ≤ 10V within +20/-30% of initial value for V r ≥ 16V DF initial limit for Vr ≤ 10V 1.25x initial limit for Ur ≥ 16V ESR 1.25 x initial limit Determine after application of 125ºC temperature, 2/3 rated voltage for 1000 +48/-0 hours and then leaving 1-2 hours at room temperature. Power sup- ply impedance to be ≤ 0.1Ω/V. 125°C, 0V, 1000h Determine after leaving for 1000 hours at 85±2ºC, 85% relative humidity and rated voltage and then recovery 1-2 hours at room temperature. Test temperature: 125ºC +3/0ºC Surge voltage: 1.3x 2/3x rated voltage at 125°C Charge/Discharge resistance: 1000±100Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge Step Temperature°C Duration(min) 1 +20±2 15 2 -55+0/-3 15 3 +20±2 15 4 +85+3/-0 15 5 +125+3/-0 15 6 +20±2 15 *Initial Limit For use outside of recommended conditions and special request, please contact manufacturer. QUALIFICATION TABLE RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr. 100% 90% 80% 70% 60% 50% 40% -55ºC 85ºC 105ºC Rated Voltage Recommended Application Voltage 125ºC For Vr ≤ 10V 100% 90% 80% 70% 60% 50% 40% -55ºC 85ºC 105ºC Rated Voltage Recommended Application Voltage 125ºC For Vr ≥ 16V Rated Operating Temperature voltage ≤85°C 105°C 125°C ≤10V 90% 90% 67% ≥16V 80% 80% 50% Surge Voltage