TCPWCH06MT900

TCB4F-617DB1673 TOKEN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 23

Technical content

TEL: 886-2-2981 0109; FAX: 886-2-2988 7487 China: 12F, Zhongxing Industry Bld., Chuangye Rd., Nanshan District, Shenzhen, Guangdong TEL: 86-755-2605 5363, 2605 5364; FAX: 86-755-2605 5365 Token Electronics Industry Co., Ltd. SMD BALUN TRANSFORMERS TOKEN

Specification Changed or Version Updated will be posted at irregular intervals. All Updated and Final Specifications, Please Confirm with TOKEN ELECTRONICS REPRESENITIVES. http://www.token.com.tw rfq token.com.tw Notice: Information Product Index RF Balun & SMD EMI Filters

Balun Transformer General Information Surface Mount Balun Transformer General Infornation What is Balun Transformer? Balun is name of device that can be like a common mode choke, unbalance to balance transformer, or a step up or down transformer. Balun is an acronym of BALanced UNbalanced, it’s used to convert an unbalanced signal to a balanced one or vice versa. A balun transformer is a device that:

• joins a balanced line (one that has two conductors, with equal currents in opposite directions, such as a twisted pair cable).
• to an unbalanced line (one that has just one conductor and a ground, such as a coaxial cable). Baluns isolate a transmission line and provide a balanced output. A typical use for a balun is in a television antenna. Balanced: A method of transmitting signals using two signal lines. One line carries the source signal; the other carries a signal of opposite phase (antiphase). Unbalanced: A method of transmitting signals using one signal line, with a ground line providing a reference potential. Why Use a Balun? Baluns are used for two primary reasons:
• One : Eliminate “common mode current” on the transmission line.
• Two : Matching antenna impedance to the transmission line. TOKEN

Balun Transformer General Information Insertion Loss (dB) Loss due to transmission from primary dot port to secondary dot port and secondary port. Most balun transformers are symmetrical through their central horizontal axis, therefore, an input can be applied at the primary dot port or the primary port with differential outputs at the secondary dot and secondary ports. Basics of Broadband Transformers There are two kinds of broadband transformers. One is known as a conventional type, which has separate primary and secondary windings, as do power and audio transformers. The other type is called a transmission-line transformer. It is believed that the latter variety is the most efficient of the two. Transmission-line transformers are wound with twisted or parallel windings and produce specific integers of impedance transformation, such as 4:1, 9:1, and 16:1. Conventional transformers permit you to obtain any transformation ratio you need. Version 2010 Applications of Balun Transformers In a balun transformer, one pair of terminals is balanced, that is, the currents are equal in magnitude and opposite in phase. The other pair of terminals is unbalanced; one side is connected to electrical ground and the other carries the signal. Balun transformers can be used between various parts of a wireless or cable communications system. Some common applications denotes as following:

• Television receiver (Balanced) - coaxial cable network or Coaxial antenna system (Unbalanced)
• FM broadcast receiver (Balanced) - Coaxial antenna system (Unbalanced)
• Dipole antenna (Balanced) - Coaxial transmission line (Unbalanced)
• Parallel-wire transmission line (Balanced) - Coaxial transmitter output, or Coaxial receiver input (Unbalanced) Token’s baluns provide impedance transformation in addition to conversion between balanced and unbalanced signal modes. Most television and FM broadcast receivers are designed for 300-ohm balanced systems, while coaxial cables have characteristic impedances of 50 or 75 ohms. Impedance-transformer baluns with larger ratios are available and used to match high-impedance balanced antennas to low-impedance unbalanced wireless receivers, transmitters, or transceivers. TOKEN

SMD Common Mode Balun Transformers For USB - TCB4F Series SMD Common Mode Balun Transformers TCB4F SMD Balun Transformers Surface Mount Common Mode Balun Transformer (TCB4F) For USB Preview Token Electronics has introduced SMD common mode transformers (balun transformers) in 3.8 x 4.4 mm compact size, which are used to convert between unbalanced-balanced signals in the antenna inputs of tuner circuits for terrestrial digital broadcast compatible compact devices. Up to now balun transformers have been made by winding wire around a spectacle-shaped ferrite core, and are widely used in electronic devices such as TVs and desktop PCs. Token SMD choke coils common mode TCB4F series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD TCB4F can be customed designs and tighter tolerances available on request. Windings use paired or and triple wires for high uniformity. Base pins are end proccessed to allow direct mounting on PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and for impedance conversion. Application of SMD choke coils specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token is equipped to design and produce custom components to meet many design and reliability demands. Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information. Features : - Pair and triple wire coil for high stability and high balance. - Available in tape & reel for automatic surface mounting.. Applications : - Double Balance Mixers. - Broad-Band Transformers. - Impedance Transformers. - Common Mode Filter, Balun Transformers. Version 2010 TOKEN

TCB4F SMD Balun Transformers Configurations & Dimensions (TCB4F - 617DB) Electrical Characteristics A Version 2010 D B C G F H E J I L Land Pattern K Type A B(max) C(max) D E(max) F G H I J K L Note: Design as Customer’s Requested Specifications. Part Number Winding Turns TCB4F - 617DB1673 2 1/2 T 300 TCB4F - 617DB1674 3 1/2 T 300 TCB4F - 617DB1675 4 1/2 T 300 TCB4F - 617DB1714 5 1/2 T 300 (TCB4F - 617DB) Test Circuit A 50Ω 100Ω 100Ω Port1 Port3 Port2 TOKEN

TCB4F SMD Balun Transformers 05 of 21 (TCB4F - 617DB) Typical Characteristics A Version 2010 TCB4F-617DB-1673 (Impedance Ratio=50Ω:200Ω ) Port1~Port2 Port1~Port3 Frequency (MHz) Insertion Loss (dB) 10 1 10 100 1000 3000 TCB4F-617DB-1714 (Impedance Ratio=50Ω:200Ω ) Port1~Port3 Frequency (MHz) Insertion Loss (dB) 910 1 10 100 1000 3000 Port1~Port2 (TCB4F - 617DB) Test Circuit B (TCB4F - 617DB) Electrical Characteristics B Part Number Winding Turns μiac TCB4F - 617DB1653 2 1/2 T 300 TCB4F - 617DB1654 3 1/2 T 300 TCB4F - 617DB1655 4 1/2 T 300 TCB4F - 617DB1724 5 1/2 T 300 50Ω Port1 Port2 50Ω TOKEN

TCB4F SMD Balun Transformers 06 of 21 (TCB4F - 617DB) Typical Characteristics B Version 2010 Frequency (MHz) TCB4F-617DB-1653 (50Ω:50Ω ) Insertion Loss (dB) 30001000100101 TCB4F-617DB-1654 (50Ω:50Ω ) 10 30001000100101 Insertion Loss (dB) Frequency (MHz) TCB4F-617DB-1655 (50Ω:50Ω ) TCB4F-617DB-1724 (50Ω:50Ω ) 10 30001000100101 Frequency (MHz) Frequency (MHz) 30001000100101 10Insertion Loss (dB) Insertion Loss (dB) (TCB4F - 617DB) Electrical Characteristics C Part Number Winding Turns μiac TCB4F - 617DB1643 2 1/2 T 1500 TCB4F - 617DB1644 3 1/2 T 1500 TCB4F - 617DB1645 4 1/2 T 1500 TCB4F - 617DB1646 5 1/2 T 1500 (TCB4F - 617DB) Electrical Characteristics C 50Ω Port1 50Ω Port2 TOKEN

TCB4F SMD Balun Transformers 07 of 21 (TCB4F - 617DB) Typical Characteristics C Version 2010 TCB4F - 617DB-1643 (50Ω:50Ω ) 30001000100101 Frequency (MHz) Insertion Loss (dB) Insertion Loss (dB)Insertion Loss (dB) 10 30001000100101 Frequency (MHz) 30001000100101 Frequency (MHz) Insertion Loss (dB) 30001000100101 Frequency (MHz) TCB4F - 617DB-1645 (50Ω:50Ω ) TCB4F - 617DB-1644 (50Ω:50Ω ) TCB4F - 617DB-1646 (50Ω:50Ω ) (TCB4F - 617PT) Electrical Characteristics Part Number Winding Turns 1-2=2-3=4-6 μiac TCB4F - 617PT1667 2T 300 TCB4F - 617PT1669 3T 300 TCB4F - 617PT1699 4T 300 TCB4F - 617PT1664 5T 300 (TCB4F - 617PT) Test Circuit 50Ω 100Ω 100Ω Port3 Port1 Port2 TOKEN

TCB4F SMD Balun Transformers 08 of 21 (TCB4F - 617PT) Typical Characteristics Version 2010 TCB4F-617PT-1667 (Impedance Ratio=50Ω:200Ω ) TCB4F-617PT-1664 (Impedance Ratio=50Ω:200Ω ) 101 10 100 1000 3000 Port1~Port2 Port1~Port3 Frequency (MHz) Insertion Loss (dB) Insertion Loss (dB) Frequency (MHz) 101 10 100 1000 3000 Port1~Port2 Port1~Port3 Back to 1st Page - SMD Common Mode Balun Transformers (TCB4F)  Part Number: TCB4F How to Order   617DB1673TCB4F  Type Code Type 617DB1673 Frequency mixer 617PT1667 Frequency mixer 617DB1653 Balun Transformers 617DB1643 Balun Transformers TOKEN

TCB5F RF Balun Transformer Surface Mount RF Balun Transformer (TCB5F) Common Mode Preview Token utilizes the latest winding technology using paired wires for high uniformity and enabling the most cost- effective designs in manufacturing common mode surface mount RF balun transformer products. Base pins are end proccessed to allow direct mounting on PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and for impedance conversion. Token RF Balun Transformer TCB5F series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD TCB5F feature with ultra-compact size, wide inductance selection, and low-resistance coils. SMD choke coils can be customed designs and tighter tolerances available on request. Application of Balun Transformer specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token is equipped to design and produce custom components to meet many design and reliability demands. Custom parts are available on request. Token will also produce devices outside these specifications to meet specific customer requirements, please contact our sales for more information. Features : - Pair wire coil for high stability. Applications : - Double Balance Mixers, Broad-Band Transformers; - Impedance Transformers, Balun Transformers. TOKEN

TCB5F RF Balun Transformer Configurations & Dimensions (TCB5F - 458DB) Electrical Characteristics Version 2010 (TCB4F - 617DB) Test Circuit A A B C D E F G H I J Recommended Patterns Type A (max) B (max) C (max) D E F G H I J Note: Design as Customer’s Requested Specifications. Part Number Winding Turns TCB5F - 458DB1614 2 1/2 T 300 TCB5F - 458DB1615 3 1/2 T 300 TCB5F - 458DB1616 4 1/2 T 300 50Ω 100Ω 100Ω Port3 Port1 Port2 TOKEN

TCB5F RF Balun Transformer 11 of 21 (TCB5F - 458DB) Typical Characteristics Version 2010 (TCB5F - 458PT) Test Circuit (TCB4F - 617DB) Electrical Characteristics B TCB5F-458DB-1614 (Impedance Ratio=50Ω:200Ω)Insertion Loss (dB) 1000100101 Frequency (MHz) 3000 Port1~Port2 Port1~Port3 Insertion Loss (dB) 1000100101 Frequency (MHz) 3000 Port1~Port3 Port1~Port2 TCB5F-458DB-1616 (Impedance Ratio=50Ω:200Ω) Part Number Winding Turns 1-2=2-3=4-6 μiac TCB5F - 458PT1619 2 T 300 TCB5F - 458PT1586 3 T 230 TCB5F - 458PT1587 4 T 230 TCB5F - 458PT1565 5 T 230 50Ω 100Ω 100Ω Port3 Port1 Port2 TOKEN

TCB5F RF Balun Transformer 12 of 21 (TCB5F - 458PT) Typical Characteristics Version 2010 TCB5F-458PT-1619 (Impedance Ratio=50Ω:200Ω) TCB5F-458PT-1587 (Impedance Ratio=50Ω:200Ω) TCB5F-458PT-1565 (Impedance Ratio=50Ω:200Ω) TCB5F-458PT-1586 (Impedance Ratio=50Ω:200Ω) Insertion Loss (dB) 1000100101 Frequency (MHz) 3000 Port1~Port3 Port1~Port2 Insertion Loss (dB) 1000100101 Frequency (MHz) 3000 Port1~Port2 Port1~Port3 Insertion Loss (dB) 1000100101 Frequency (MHz) 3000 Port1~Port3 Port1~Port2 Insertion Loss (dB) 1000100101 Frequency (MHz) 3000 Port1~Port3 Port1~Port2 Back to 1st Page - Surface Mount RF Balun Transformer (TCB5F)  Part Number: TCB4F How to Order   458DB1614TCB5F  Type Code Type 458DB1614 Frequency mixer 458DB1615 Frequency mixer 458PT1619 Frequency mixer 458PT1586 Frequency mixer TOKEN

TCB5FL SMD Balun Transformer SMD Balun Transformer (TCB5FL) Common Mode Preview A Balun is a device which converts balanced impedance to unbalanced and vice versa. In addition, baluns can also provide impedance transformation, hence the name Balun Transformers. Token utilizes the latest winding technology using paired wires for high uniformity and enabling the most cost- effective designs in manufacturing SMD balun transformer products. Token SMD common mode TCB5FL balun transformer series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD TCB5FL feature with ultra-compact size, wide inductance selection, and low-resistance coils. SMD TCB5FL can be customed designs and tighter tolerances available on request. Application of SMD balun transformer specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Base pins are end proccessed to allow direct mounting on PCB. Ideal for use in double balanced mixers, and as broad band transformers, transistors and for impedance conversion. Token will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. Features : - Pair wire coil for high stability. Applications : - Double Balance Mixers, Broad-Band Transformers; - Impedance Transformers, Balun Transformers , etc.. TOKEN

TCB5FL SMD Balun Transformer Configurations & Dimensions (TCB5FL) Common Mode Electrical Characteristics Version 2010 (TCB4F - 617DB) Test Circuit A A B C D E F G H I Recommended Patterns Type A (max) B (max) C (max) D E F G H I Note: Design as Customer’s Requested Specifications. Part Number Winding Turns TCB5FL - 616DB1196 2 1/2 T 300 TCB5FL - 616DB1197 3 1/2 T 300 TCB5FL - 616DB1198 4 1/2 T 300 50Ω 100Ω Port1 Port3 100Ω Port2 TOKEN

TCB5FL SMD Balun Transformer 15 of 21 (TCB5F - 458DB) Typical Characteristics Version 2010 TCB5F-616DB-1197 (Impedance Ratio=50Ω:200Ω)TCB5F-616DB-1196 (Impedance Ratio=50Ω:200Ω) TCB5F-616DB-1198 (Impedance Ratio=50Ω:200Ω) 1000100101 Frequency (MHz) 3000 Insertion Loss (dB)-10 Port1~Port2 Port1~Port3 Insertion Loss (dB)-10 1000100101 Frequency (MHz) 3000 Port1~Port2 Port1~Port3 Insertion Loss (dB)-10 1000100101 Frequency (MHz) 3000 Port1~Port3 Port1~Port2 Back to 1st Page - SMD Balun Transformer (TCB5FL) Common Mode  Part Number: TCB5FL How to Order   616DB1196TCB5F  Type Code Type 616DB1196 Frequency mixer 616DB1197 Frequency mixer TOKEN

TCPWC EMI Filters SMD Choke Preview Token EMI filters SMD common mode choke TCPWC series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD choke EMI filters feature with ultra-compact size, wide inductance selection, and low-resistance coils. SMD TCPWC can be customed designs and tighter tolerances available on request. Token’s TCPWC taking advantage of the latest winding technology consists ferrite core and a pair lines enabling the most effective in noise suppression designs. Feature high common-mode impedance at noise band and low differential-mode impedance at signal band. Low differential-mode impedance with high coupling factor, there is almost no distortion on high speed signal. Application of SMD choke EMI filters specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. Applications : - USB Line for Personal Computers and Peripheral. - IEEE 1394 Line for Personal Computers ,DVC ,STB. - LCD Panels. Low-V oltage Differential Signal (LVDS). - EMI Radiation Noise Suppression for Any Electronic Device. TOKEN

TCPWC EMI Filters SMD Choke Configurations & Dimensions

Electrical Characteristics

I J I K A F E E B G C TYPE A B C E F G H I J K Part Number Impedance (Ω) 100MHz DCR (Ω)(max) Rated Current (mA)(max) Rated V oltage (V)(DC) Withstanding V oltage (V)(DC) Insulation Resistance (MΩ)(min) TCPWCH05MT670 67 0.25 400 50 125 10 TCPWCH05MT900 90 0.35 330 50 125 10 TCPWCH05MT121 120 0.30 370 50 125 10 TCPWCH05MT181 180 0.35 330 50 125 10 TCPWCH05MT201 200 0.35 330 50 125 10 TCPWCH05MT261 260 0.40 300 50 125 10 TCPWCH05MT371 370 0.40 280 50 125 10 TCPWCH06MT900 90 0.30 370 50 125 10 TCPWCH06MT161 160 0.40 340 50 125 10 TCPWCH06MT261 260 0.50 310 50 125 10 TCPWCH06MT601 600 0.80 260 50 125 10 TCPWCH06MT102 1000 1.00 230 50 125 10 TCPWCH06MT222 2200 1.20 200 50 125 10 Note: Operating Temp.: -40°C+85°C. TOKEN

TCPWC EMI Filters SMD Choke 18 of 21 Packaging Quantity & Reel Specifications Version 2010 Emboss Plastic Tape Specifications LabelD:21.8±0.8 D:13.0±0.3 2.0±0.5 Reel Specifications 1.2±0.2 11.4±1.0 9.5±0.50 60+1 -0180+0 Type Emboss Plastic Tape (PCS) TCPWCH05 2000 TCPWCH06 2000 Φ D0 Top Tape A B P1 P2 P0 Resistor Emboss Tape E WF direction of unreeling Φ D1 1.5min T Codes A ±0.10 B ±0.05 W ±0.20 E ±0.10 F ±0.10 ±0.10 ±0.10 ±0.10 ΦD0 +0.10 t ±0.10 TOKEN

TCPWC EMI Filters SMD Choke 19 of 21 Leader / Tape Version 2010 (TCB4F - 617DB) Electrical Characteristics C 50Ω Port1 50Ω Port2 Trailer End Trailer(80mm min) Empty Compartments with Cover Tape (80mm min) Cover Tape Only 450mm min Leader Peel-off Force 160~180° Top cover tape Base tape The force for tearing off cover tape is 0.05 ~ 0.69(N) in the arrow direction at the following conditions: Temperature: 5 ~ 35°C. Humidity: 45 ~ 85%. Atmospheric pressure: 860 ~ 1060 hpa. TOKEN

TCPWC EMI Filters SMD Choke 20 of 21 Environmental Characteristics Version 2010 Test Items Specifications Test Conditions / Test Methods Electrical Performance Test Impedance Refer to standard electrical characteristic spec. LCR Meter HP 4291B DC Resistance (RDC) Micro-Ohm meter (GOM-801G) Withstand V oltage (VDC) Component should not be damaged Test V oltage: 2.5 Times Rated V oltage; Testing Time: 60 sec. Charge Current: 0.5mA Rated V oltage (VDC) Test V oltage: Rated V oltage; Testing Time: 1 to 5 sec; Charge Current: 1mA Insulation Resistance (I.R.) Charge Current: 1 minute 10M ohm min Mechanical Performance Test Component Adhesion (push Test) Base: 0805 ≥ 2 Lbs Cover: 0805 ≥ 1 Lbs Base: 1206 ≥ 4 Lbs Cover: 1206 ≥ 2 Lbs The component should be soldered (232°C±5°C for 10 sec.) totinned copper substrate. Applied force gauge to the side of component It must withstand force of 2 or 4 pounds without failure of the component. Drop Test Component should not be damaged Dropping chip by each side and corner; Drop 10 times in total Drop height:100cm; Drop weight:125g Solderability Test The terminal should at least be 90% covered with solder The component shall be dipped in a melted solder bath at 235°C±5°C for 5 seconds. Vibration Test (Low Frequency) Component should not be damaged 1. Amplitude: 1.5 m/m; 2. Frequency: 10-55-10 Hz(1min); 3. Direction: X, Y , Z; 4. Duration: 2 Hrs/X, Y , Z. Climatic Test Low Temperature Storage Test Impedance change: Within±20% Without distinct damage in ppearance. 1. Temp: -40°C±C2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. Thermal Shock Test Total: 5 Cycles High Temperature Storage Test 1. Temp: 85°C±2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. High Temperature Load Life Test There should be no evidence of short or open circuit 1. Temp: 85°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current Low Temperature Load Life Test 1. Temp: -40°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current Note: Storage Temperature: 25±3°C; Humidity:<80%RH ROOM TEMP 15MINS -25±2°C 30MINS ROOM TEMP 15MINS 30MINS -85±2°C TOKEN

TCPWC EMI Filters SMD Choke 21 of 21Version 2010 Back to 1st Page - EMI Filters SMD Common Mode Choke (TCPWC)  Part Number: TCPWCH05, TCPWCH06 How to Order   HTCPWC M TR 900 Code Shielding Type H Shielding  Shielding Type  Dimensions (L×W) (mm) Code Dimensions(L×W) EIA 05 2.10×1.20 EIA0805 06 3.20×1.50 1206  Impedance Tolerance: M (±20%) Code Packaging TR Taping Reel p Bulk  Packaging  Impedance Code Impedance 900 90Ω 121 120Ω 102 1000Ω 222 2200Ω TOKEN