TCP1.25 EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

TCP1.25 Product features

  • The first and most reliable surface mount telecom circuit protector designed to protect against power cross faults and comply with all surge requirements.
  • Allows compliance with telecom regulatory standards including Bellcore GR 1089, UL 1950/60950, and FCC part 68. Application circuit testing is recommended.
  • Eliminates the need for a current limiting resistor.
  • Protects against overcurrent conditions found in telecom Subscriber Line Interface Cards (SLICs), xDSL Modem Applications, Set-Top Boxes, and Consumer Premises Equipment (CPE).
  • TCP1.25-R tested and confirmed compatible with STMicroelectronics Trisil™ Transient Surge Arrestor (listed below) Environmental data
  • Life Test: MIL-STD-202, Method 108A, Test Condition D
  • Load Humidity: MIL-STD-202, Method 103B
  • Moisture Resistance: MIL-STD-202, Method 106E
  • Thermal Shock: MIL-STD-202, Method 107D, air-to-air
  • Case Resistance: EIA/IS-722
  • Resistance to Dissolution of Metallization: ANSI J-STD-002, Test D
  • Mechanical Shock: MIL-STD-202, Method 213B, Test Condition A
  • High Frequency Vibration: MIL-STD-202, Method 204D, Test Condition D
  • Resistance to Solvents: MIL-STD-202, Method 215A Agency information TCP1.25, TCP500 & TCP2 Telecom circuit protector STMicroelectronics Trisil™ P/N’s SMP100LC-XXX SMP100MC-XXX
  • UL Recognition Card: JDYX2/E19180
  • CSA Component Certification Record and Class No.: 053787C000, 1422 30 Ordering code
  • Specify packaging, product and option code (i.e., TR2-TCP1-25-R) Soldering method
  • Wave Immersion: 260°C, 10 sec max.
  • Infrared: 260°C, 30 sec max. * If the device does not open at 250% within 120 seconds, increase current to 300% of amp rating. Device must open in 10 seconds max.

ELECTRICAL CHARACTERISTICS

% of Amp Rating Opening Time 100% 4 Hours Minimum 250% 1 Second Minimum 250% 4-10 Seconds Typical 250%* 120 Seconds Maximum 300% 10 Seconds Maximum 5.2 3.7 (0.204) (0.145) 4.0 (0.157) 12.6 (0.496) Land PatternDimensions mm⁄(inches)

TCP1.25, TCP500 & TCP2 Telecom circuit protector www.eaton.com/electronics ELECTRICAL AND POWER CROSS SPECIFICATIONS Part Voltage Typical Maximum Typical Number Rating Melting Total Voltage AC Interrupting Rating* 250VAC 600VAC DC Cold Resistance** (ohms) min. typ. max. I 2t† Clearing Drop‡ Alpha Code Marking 1st Code 2nd Code * AC Interrupting Rating (Measured at designated voltage, 100% power factor) DC Cold Resistance (Measured at 10% of rated current) * On RoHS Compliant Version (-R option) † Typical Melting I 2t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds) ‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes) LIGHTNING SURGE SPECIFICATIONS Surge Specification Surge Repetitions Waveform Current (A) Voltage (V) Performance (µSec.) Requirement FCC 47 Part 68 Longitudinal Type A 2 10x160 100 per fuse 1500 Fuse cannot open FCC 47 Part 68 Metallic Type B 2 10x560 100 800 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 10x1000 100 1000 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 2x10 500 2500 Fuse cannot open Surge out 1 10x160 160 N/A Fuse cannot open Surge out 1 10x560 115 N/A Fuse cannot open Special Investigation The TCP1.25-R is designed to provide overcurrent protection for telecom SLIC, xDSL modem, and set-top box applications regardless of the overvoltage device selected. To provide an easier specification experience, Cooper Bussmann and STMicroelectronics have joined together to provide a special test report confirming the coordination between the TCP1.25A and SMP100MC-270 devices. TEST CIRCUITS * Note: or other STMicroelectronics Trisil™ par t n umber listed in table on page 1 Fuse TCP 1.25-R T SMP100MC-270* Tip L Gnd Fuse TCP 1.25-R Tip S SMP100MC-270* Gnd SMP100MC-270* Ring SRing L Fuse TCP 1.25-R Test Circuit 1 Test Circuit 2 TEST PROGRAM Test Standard Results Lightning Surge Tests 10/1000 µs + and –1kV 100A (25 pulses of each polarity) Bellcore GR-1089 Pa ssed 2/10µs + and –2.5 and 5kV 500A (10 pulses of each polarity) Bellcore GR-1089 Passed 10/560µs + and –800V 100A (1 pulse of each polarity) FCC Part 68 Passed 10/160µs + and –1.5kV 200A (1 pulse of each polarity) FCC Part 68 Passed 10/700µs + and –1.5kV 37.5A (5 pulses of each polarity) K20 Passed Electrical and Power Cross Tests 600V 3A 1.1s (/f_irst le vel) Bellcore GR-1089 Pas sed 277V 25A (second level) Bellcore GR-1089 Pa ssed 600V 60A 5s(second level) Bellcore GR-1089 Pas sed 600V 40A 1.5s UL 60950 Passed 600V 2.2A 30min UL 60950 Passed 600V 1A 0.2s (A criteria) K20 Passed 230V 1.44A/0.77A/0.38A 15min (A cr iteria) K20 Passed 230V 23A 15min (A cr iteria) K20 Passed For additional information on STMicroelectronic’s T risil™ Product line, please see www.st.com/protection

TCP1.25, TCP500 & TCP2 Telecom circuit protector 3www.eaton.com/electronics TCP500 & TCP2 Product features

  • Designed to protect Consumer Premises Equipment from harmful overcurrents.
  • Allows compliance with telecom regulatory standards including UL 1950/60950, and FCC part 68. Application circuit testing is recommended.
  • Eliminates the need for a current limiting resistor. Environmental data
  • Life Test: MIL-STD-202, Method 108A, Test Condition D
  • Load Humidity: MIL-STD-202, Method 103B
  • Moisture Resistance: MIL-STD-202, Method 106E
  • Thermal Shock: MIL-STD-202, Method 107D, air-to- air
  • Case Resistance: EIA/IS-722
  • Resistance to Dissolution of Metallization: ANSI J- STD-002, Test D
  • Mechanical Shock: MIL-STD-202, Method 213B, Test Condition A
  • High Frequency Vibration: MIL-STD-202, Method 204D, Test Condition D
  • Resistance to Solvents: MIL-STD-202, Method 215A Agency information
  • UL Recognition Card: JDYX2/E19180
  • CSA Component Certification Record and Class No.: 053787C000, 1422 Ordering
  • Specify packaging, product and option code (i.e., TR2-TCP500-R) Soldering method
  • Wave Immersion: 260°C, 10 sec max.
  • Infrared: 260°C, 30 sec max. * If the device does not open at 250% within 120 seconds, increase current to 300% of amp rating. Device must open in 10 seconds max.

% of Amp Rating Opening Time 100% 4 Hours Minimum 250% 1 Second Minimum 250% 4-10 Seconds Typical 250%* 120 Seconds Maximum 300% 10 Seconds Maximum 5.2 3.7 (0.204) (0.145) 4.0 (0.157) 12.6 (0.496) Land PatternDimensions mm⁄(inches) ELECTRICAL AND POWER CROSS SPECIFICATIONS Part Voltage Typical Maximum Typical Number Rating Melting Total Voltage AC Interrupting Rating* 250VAC 600VAC DC Cold Resistance (ohms) min. typ. max. I 2t† Clearing Drop‡ Alpha Code Marking 1st Code 2nd Code TCP500-R 250 V 50 A 40 A 0.420 0.530 0.640 1.3 A 2s 100 A2s 471mV F TCP2-R 250 V 50 A 60 A 0.1000.075 0.050 30 A2s 100 A 2s 205mV N R* LIGHTNING SURGE SPECIFICATIONS Surge Specification Sur ge Repetitions Waveform Current (A) Voltage (V) Performance (µSec.) Requirement TCP 500mA tested FCC 47 Part 68 Longitudinal Type B 2 5x320 37.5 N/A Fuse cannot open FCC 47 Part 68 Metallic Type A 2 10x560 100 800 Fuse must open safely Surge out 25 10x160 65 N/A Fuse cannot open TCP2A tested FCC 47 Part 68 Longitudinal Type A 2 10x160 100 per fuse 1500 Fuse cannot open FCC 47 Part 68 Metallic T ype B 2 10x560 100 800 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 10x1000 100 1000 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 2x10 500 2500 Fuse cannot open Surge out 1 10x160 160 N/A Fuse cannot open Surge out 1 10x560 115 N/A Fuse cannot open * AC Interrupting Rating (Measured at designated voltage, 100% power factor) DC Cold Resistance (Measured at 10% of rated current) * On RoHS Compliant Version (-R option) † Typical Melting I2t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds) ‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes)

1000 Eaton Boulevard

Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 2609 December 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Technical Data 2609 Effective December 2017 TCP1.25, TCP500 & TCP2 Telecom circuit protector TIME CURRENT CURVE PACKAGING CODE Packaging Code Description TR2 2,500 pieces of fuses on 24mm tape-and-reel on 13 inch (330mm) reel per EIA Standard 481, 8mm pitch