TCP211 TEWS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
TCP211 CompactPCI Carrier for 2 IndustryPacks®
Application Information
The TCP211 is a standard 3U CompactPCI carrier for up to two single-size or one double-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. Access to all IP I/O lines is provided by two 50 pin 0.1 inch flat ribbon cable connectors mounted in the front panel. The TCP211 can operate with 3.3V and 5.0V PCI I/O signaling voltage. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TCP211 provi des a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40°C to +85°C. The TCP211 complies with the PICMG 2.0 Revision 3.0 CompactPCI specification. Technical Information Standard 3U 32 bit CompactPCI module conforming to PICMG 2.0 Rev 3.0 PCI 2.2 compliant interface Board size: 160mm x 100mm PCI Interface : 33 MHz; 32 bit 5V and 3.3V PCI I/O signaling voltage ANSI/VITA 4-1995 compliant interface to IndustryPack modules IndustryPack slots: Two single-size or one double-size 8/32 MHz interface, no DMA 8 MByte memory space per IP Routing of all IP interrupts to PCI INTA, local interrupt status register I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP mounted in front panel Self healing fuses and RF-filtering on all IP power lines Operating temperature -40°C to +85° TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.1 2017-08-17 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com
TCP211-10R 3U 2 Slot IndustryPack Carrier, 50 pin ribbon cable connector (stacked version) For the availability of non-RoHS compliant (leaded solder) products please contact TEWS. Documentation TCP211-DOC User Manual Software CARRIER-SW-42 VxWorks IP Carrier Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS.
Related Products
TA305 Cable Kit for Modules with 50 pin Ribbon Cable Connector TCP001-FP 6U Front Panel Extension for 3U cPCI Boards TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.1 2017-08-17 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com