TCP020E MICROSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 1Copyright 2000 TCP020E.PDF 2002-05-02 WWW.Microsemi .COM TCP020E Tripolar Overvoltage Protection For Network Interfaces PRELIMINARY SANTA ANA DIVISION
DESCRIPTION
Transient suppressor TCP020E is dedicated to ISDN, T1, Ethernet, and data lines protection. Important features - very low breakover voltage combined with low capacitance. May be used as a triple or a single bi-directional suppressor – see schematic diagram. This product provides: - low capacitance, allowing high speed signal transmissions with low losses - low dynamic breakover voltage, protecting submicron microelectronic circuitry - Compliance with BELLCORE 1089-GR requirements for intrabuilding lightning and power fault surges. This low stand-off voltage and low capacitance protector is well suited for use in high-speed interfaces as ISDN. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com COMPLIES WITH THE FOLLOWING STANDARDS: CCITT K17 - K20 10/700 µs 1.5 KV 5/310 µs 38 A VDE 0433 10/700 µs 2 KV 5/310 µs 50 A VDE 0878 1.2/50 µs 1.5 KV 1/20 µs 40 A CNET 0.5/700 µs 1.5 KV 0.2/310 µs 38 A IEC801-2 15kV air discharge IEC801-5 1.2/50 µs 8/20 µs 4kV 100 A TTCCPP002200EE KEY FEATURES KEY FEATURES KEY FEATURES KEY FEATURES /square4 BIDIRECTIONAL TRIPLE CROWBAR PROTECTION /square4 PEAK PULSE CURRENT: IPP = 30 A, 10/1000 µs /square4 BREAKDOWN VOLTAGE: 18 V
- AVAILABLE IN SO8 PACKAGES
- LOW DYNAMIC BREAKOVER VOLTAGE:
25 V @ 2/10 µs
- Low Capacitance: 30 pF APPLICATIONS/BENEFITAPPLICATIONS/BENEFITAPPLICATIONS/BENEFITAPPLICATIONS/BENEFITSSSS /square4 UL94V-0 TCPxx packages comply with requirements of UL94V-0
2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 2Copyright 2000 TCP020E.PDF 2002-05-02 WWW.Microsemi .COM TCP020E Tripolar Overvoltage Protection For Network Interfaces PRELIMINARY SANTA ANA DIVISION Note 1 : Pulse waveform : 10/1000 µs tr=10 µs tp=1000 µs 8/20 µs tr=8 µs tp=20 µs 2/10 µs tr=2 µs tp=10 µs ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Symbol Parameter Value Unit IPP Peak pulse current (see note 1) 10/1000 µs 8/20 µs 2/10 µs 150 200 A ITSM Non repetitive surge peak on-state current (F = 50 Hz). tp = 10 ms t = 1 s 3.5 A Tstg Tj Storage temperature range Maximum junction temperature -55 to + 150 150 TL Maximum lead temperature for soldering during 10s 260 °C THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j-a) Junction to ambient SO 8 170 °C/W EELLEECCTTRRIICCAALLSS
2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 3Copyright 2000 TCP020E.PDF 2002-05-02 WWW.Microsemi .COM TCP020E Tripolar Overvoltage Protection For Network Interfaces PRELIMINARY SANTA ANA DIVISION ELECTRICAL CHARACTERISTICS (Tamb= 25°C) Symbol Parameter VRM Stand-off voltage IRM Leakage current VBR Breakdown voltage VBO Breakover voltage IH Holding current IBO Breakover current IPP Peak pulse current VF Forward Voltage Drop C Capacitance IRM @ VRM max IR @ VBR min VBO max VBO dyn typ IBO max IH min CP max Types µA V mA V V V mA mA pF TCP020E 1 16 1 18 22 25 100 50 30 EELLEECCTTRRIICCAALLSS
2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 4Copyright 2000 TCP020E.PDF 2002-05-02 WWW.Microsemi .COM TCP020E Tripolar Overvoltage Protection For Network Interfaces PRELIMINARY SANTA ANA DIVISION PPAACCKKAAGGEE DDAATTAA
2830 S. Fairview Street, CA. 92704, Tel: 714-979-8220, Fax: 714-557-5989 Page 5Copyright 2000 TCP020E.PDF 2002-05-02 WWW.Microsemi .COM TCP020E Tripolar Overvoltage Protection For Network Interfaces PRELIMINARY SANTA ANA DIVISION NNOOTTEESS