TCP009A MICROSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 1Copyright  2000 MSC1635.PDF 2000-12-01 WWW.Microsemi .COM TCP009A DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION

DESCRIPTION

This Thyristor Surge Suppressor device has been especially designed to protect against overvoltage. Two diodes clamp positive overloads while negative surges are suppressed by two protection thyristors. Particular attention has been given to the internal wire bonding. The ”4- point” configuration ensures a reliable protection, eliminating overvoltages introduced by the parasitic inductances of the wiring (Ldi/dt), especially for very fast transient overvoltages. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com COMPLIES WITH THE FOLLOWING STANDARDS: (*) with series resistors or PTC. CCITT K20: 10/700 µs 1 kV 5/310 µs 38 A VDE 0433: 10/700 µs 2 kV 5/310 µs 50 A VDE 0878: 1.2/50 µs 1.5 kV 1/20 µs 40 A I3124: 0.5/700 µs 1 Kv 0.2/310 µs 38 A FCC part 68: 02/10 µs 2.5 kv 02/10 µs 125 A (*) BELLCORE TR-NWT-001089: 02/10 µs 2.5 kv 02/10 µs 125 A (*) 10/1000 µs 1 kV 10/1000 µs 40 A (*) KEY FEATURES KEY FEATURES KEY FEATURES KEY FEATURES !"DUAL ASYMETRICAL TRANSIENT SUPPRESSOR !"PEAK PULSE CURRENT: I PP=40A,10/1000µs !"HOLDING CURRENT:50mA min. !"BREAKDOWN VOLTAGE: TCP009A: 9 V LOW DYNAMIC CHARACTERISTICS !"STAND CCITT K20 AND LSSGR APPLICATIONS/BENEFITAPPLICATIONS/BENEFIT APPLICATIONS/BENEFITAPPLICATIONS/BENEFITSS SS TTCCPP000099AA UL94V-0 TCPxx packages comply with requirements of UL94V-0

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 2Copyright  2000 MSC1635.PDF 2000-12-01 WWW.Microsemi .COM TCP009A DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION waveform: Note 1 : Pulse waveform : Note 1: Pulse wave 10/1000 µs tr = 10 µs tp = 1000 µs 5/310 µs tr = 5 µs tp = 310 µs 2/10 µs tr = 2 µs tp = 10 µs ABSOLUTE MAXIMUM RATINGS (Tamb = 25°C) Symbol Parameter Value Unit IPP Peak pulse current (see note 1) 10/1000 µs 5/310 µs 2/10 µs 125 A ITSM Non repetitive surge peak on-state current F = 50 Hz t = 300 ms t = 1 s t = 5 s A ITSM F=50Hz, 60x1s, 2mn between pulse 1 A Tstg Tj Storage temperature range Maximum junction temperature -55 to + 150 150 TL Maximum lead temperature for soldering during 10s 260 °C THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j-a) Junction to ambient 170 °C/W ELECTRICAL CHARACTERISTICS (Tamb= 25°C) Symbol Parameter VRM Stand-off voltage IRM Leakage current at stand-offvoltage VBR Breakdown voltage VBO Breakover voltage IH Holding current VF Forward voltage drop VFP Peak forward voltage IBO Breakover current IPP Peak pulse current C Capacitance αT Temperature coefficient EELLEECCTTRRIICCAALLSS

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 3Copyright  2000 MSC1635.PDF 2000-12-01 WWW.Microsemi .COM TCP009A DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION 1 - PARAMETERS RELATED TO DIODE LINE / GND Symbol Test Conditions Min Typ Max Unit VF IF=1A tp=100 µs 2 V 2 – PARAMETERS RELATED TO PROTECTION THYRISTOR IRM @ VRM max IR @ VBR min VBO max IBO min max IH min C max Types µA V mA V V V mA mA pF TCP009A 10 8 1 9 12 50 400 50 30 EELLEECCTTRRIICCAALLSS

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 4Copyright  2000 MSC1635.PDF 2000-12-01 WWW.Microsemi .COM TCP009A DUAL ASYMETRICAL TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION NNOOTTEESS

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 1Copyright  2000 MSC1635.PDF 2000-12-04 WWW.Microsemi .COM TCP009E TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION Transient suppressor TCP009 is dedicated to XDSL, T1, Ethernet, and data lines protection. Important features - very low breakover voltage combined with low capacitance. May be used as a triple or a single bi- directional suppressor – see schematic diagram. This product provides: - low capacitance, allowing high speed signal transmissions with low losses - low dynamic breakover voltage, protecting submicron microelectronic circuitry - Compliance with BELLCORE 1089-GR requirements for intrabuilding lightning and power fault surges. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com COMPLIES WITH THE FOLLOWING STANDARDS: CCITT K17 - K20 10/700 µs 1.5 KV 5/310 µs 38 A VDE 0433 10/700 µs 2 KV 5/310 µs 50 A VDE 0878 1.2/50 µs 1.5 KV 1/20 µs 40 A CNET 0.5/700 µs 1.5 KV 0.2/310 µs 38 A TTCCPP000099EE KEY FEATURES KEY FEATURES KEY FEATURES KEY FEATURES !"BIDIRECTIONAL TRIPLE CROWBAR PROTECTION !"PEAK PULSE CURRENT: IPP = 30 A, 10/1000 µs !"BREAKDOWN VOLTAGE: 9 V

  • AVAILABLE IN SO8 PACKAGES
  • LOW DYNAMIC BREAKOVER VOLTAGE:

15 V @ 2/10 µs

  • Low Capacitance: 30 pF APPLICATIONS/BENEFITAPPLICATIONS/BENEFIT APPLICATIONS/BENEFITAPPLICATIONS/BENEFITSS SS UL94V-0 TCPxx packages comply with requirements of UL94V-0

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 2Copyright  2000 MSC1635.PDF 2000-12-04 WWW.Microsemi .COM TCP009E TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION Note 1 : Pulse waveform : 10/1000 µs tr=10 µs tp=1000 µs 5/310 µs tr=5 µs tp=310 µs 2/10 µs tr=2 µs tp=10 µs ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Symbol Parameter Value Unit IPP Peak pulse current (see note 1) 10/1000 µs 5/320 µs 2/10 µs A ITSM Non repetitive surge peak on-state current (F = 50 Hz). tp = 10 ms t = 1 s 3.5 A Tstg Tj Storage temperature range Maximum junction temperature -55 to + 150 150 TL Maximum lead temperature for soldering during 10s 260 °C THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j-a) Junction to ambient SO 8 170 °C/W EELLEECCTTRRIICCAALLSS

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 3Copyright  2000 MSC1635.PDF 2000-12-04 WWW.Microsemi .COM TCP009E TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION Note 1 : Surge test according to CCITT 1.5kV,10/700 ms between Tip or Ring and ground. ELECTRICAL CHARACTERISTICS (Tamb= 25°C) Symbol Parameter VRM Stand-off voltage IRM Leakage current VBR Breakdown voltage VBO Breakover voltage IH Holding current IBO Breakover current IPP Peak pulse current VF Forward Voltage Drop C Capacitance IRM @ VRM max IR @ VBR min VBO max note 1 VBO dyn typ IBO min max note 1 IH min CP max Types µA V mA V V V mA mA mA pF TCP009E 10 5 1 9 12 15 50 400 50 30 EELLEECCTTRRIICCAALLSS

2830 S. Fairview Street, CA. 92704, 714-979-8220, Fax: 714-557-5989 Page 4Copyright  2000 MSC1635.PDF 2000-12-04 WWW.Microsemi .COM TCP009E TRANSIENT SUPPRESSOR FOR XDSL AND DATA LINES PRODUCT PREVIEW SANTA ANA DIVISION NNOOTTEESS