TCP COOPER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Description

  • The first and most reliable surface mount telecom circuit protector designed to protect against power cross faults and comply with all surge requirements.
  • Allows compliance with telecom regulatory standards including Bellcore GR 1089, UL 1950/60950, and FCC part 68. Application circuit testing is recommended.
  • Eliminates the need for a current limiting resistor.
  • Protects against overcurrent conditions found in telecom Subscriber Line Interface Cards (SLICs), xDSL Modem Applications, Set-Top Boxes, and Consumer Premises Equipment (CPE).
  • TCP1.25A tested and confirmed compatible with STMicroelectronics Trisil™ Transient Surge Arrestor (list of part numbers below) * If the device does not open at 250% within 120 seconds, increase current to 300% of amp rating.Device must open in 10 seconds max. Environmental Data
  • Life Test: MIL-STD-202, Method 108A, Test Condition D
  • Load Humidity:MIL-STD-202, Method 103B
  • Moisture Resistance:MIL-STD-202, Method 106E
  • Thermal Shock: MIL-STD-202, Method 107D, air-to-air
  • Case Resistance:EIA/IS-722
  • Resistance to Dissolution of Metallization: ANSI J-STD-002, Test D
  • Mechanical Shock: MIL-STD-202, Method 213B, Test Condition A
  • High Frequency Vibration: MIL-STD-202, Method 204D, Test Condition D
  • Resistance to Solvents: MIL-STD-202, Method 215A Agency Information
  • UL Recognition Card:JDYX2/E19180
  • CSA Component Certification Record and Class No.: 053787C000, 1422 30 Ordering
  • Specify packaging, product and option code (i.e., TR2/TCP1.25-R) Soldering Method
  • Wave Immersion: 260°C, 10 sec max.
  • Infrared: 260°C, 30 sec max. 5.2 3.7 (0.204) (0.145) 4.0 (0.157) 12.6 (0.496) Land Pattern Dimensions mm⁄(inches)

ELECTRICAL CHARACTERISTICS

% of Amp Rating Opening Time 100% 4 Hours Minimum 250% 1 Second Minimum 250% 4-10 Seconds Typical 250%* 120 Seconds Maximum 300% 10 Seconds Maximum STMicroelectronics Trisil™ P/N’s SMP100LC-XXX SMP100MC-XXX ELECTRICAL AND POWER CROSS SPECIFICATIONS Product Voltage Interrupting DC Cold Typical Maximum Typical Alpha Code Code Rating Rating* Resistance** (ohms) Melting Total Voltage Marking AC 250VAC 600VAC min. typ. max. I 2t† Clearing Drop‡ 1st Code 2nd Code * AC Interrupting Rating (Measured at designated voltage, 100% power factor) DC Cold Resistance (Measured at 10% of rated current) * On RoHS Compliant Version (-R option) † Typical Melting I 2t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds) ‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes) LIGHTNING SURGE SPECIFICATIONS Surge Specification Surge Repetitions Waveform Current (A) Voltage (V) Performance (µSec.) Requirement FCC 47 Part 68 Longitudinal Type A 2 10x160 100 per fuse 1500 Fuse cannot open FCC 47 Part 68 Metallic Type B 2 10x560 100 800 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 10x1000 100 1000 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 2x10 500 2500 Fuse cannot open Surge out 1 10x160 160 N/A Fuse cannot open Surge out 1 10x560 115 N/A Fuse cannot open TCP™ Series TCP1.25A, Telecom Circuit Protector RoHS 2002/95/EC

TCP™ Series TCP1.25A, Telecom Circuit Protector TEST CIRCUITS Special Investigation The TCP1.25A is designed to provide overcurrent protection for telecom SLIC, xDSL modem, and set-top box applications regardless of the overvoltage device selected. To provide an easier specification experience, Cooper Bussmann and STMicroelectronics have joined together to provide a special test report confirming the coordination between the TCP1.25A and SMP100MC-270 devices. * Note:or other STMicroelectronics Trisil™ part number listed in table on page 1 For additional information on STMicroelectronic’s Trisil™ Product line, please see www.st.com/protection TEST PROGRAM Test Standard Results Lightning Surge Tests 10/1000µs + and –1kV 100A (25 pulses of each polarity) Bellcore GR-1089 Passed 2/10µs + and –2.5 and 5kV 500A (10 pulses of each polarity) Bellcore GR-1089 Passed 10/560µs + and –800V 100A (1 pulse of each polarity) FCC Part 68 Passed 10/160µs + and –1.5kV 200A (1 pulse of each polarity) FCC Part 68 Passed 10/700µs + and –1.5kV 37.5A (5 pulses of each polarity) K20 Passed Electrical and Power Cross Tests 600V 3A 1.1s (first level) Bellcore GR-1089 Passed 277V 25A (second level) Bellcore GR-1089 Passed 600V 60A 5s(second level) Bellcore GR-1089 Passed 600V 40A 1.5s UL 60950 Passed 600V 2.2A 30min UL 60950 Passed 600V 1A 0.2s (A criteria) K20 Passed 230V 1.44A/0.77A/0.38A 15min (A criteria) K20 Passed 230V 23A 15min (A criteria) K20 Passed Fuse TCP 1.25A SMP100MC-270* Tip L Gnd Fuse TCP 1.25A Tip S SMP100MC-270* Gnd SMP100MC-270* Ring SRing L Fuse TCP 1.25A Test Circuit 1 T est Circuit 2

TCP™ Series TCP500MA & TCP2A, Telecom Circuit Protector

  • Designed to protect Consumer Premises Equipment from harmful overcurrents.
  • Allows compliance with telecom regulatory standards including UL 1950/60950, and FCC part 68. Application circuit testing is recommended.
  • Eliminates the need for a current limiting resistor. * If the device does not open at 250% within 120 seconds, increase current to 300% of amp rating. Device must open in 10 seconds max. Agency Information
  • UL Recognition Card: JDYX2/E19180
  • CSA Component Certification Record and Class No.: 053787C000, 1422 30 Environmental Data
  • Life Test: MIL-STD-202, Method 108A, Test Condition D
  • Load Humidity:MIL-STD-202, Method 103B
  • Moisture Resistance: MIL-STD-202, Method 106E
  • Thermal Shock: MIL-STD-202, Method 107D, air-to-air
  • Case Resistance:EIA/IS-722
  • Resistance to Dissolution of Metallization: ANSI J-STD-002, Test D
  • Mechanical Shock: MIL-STD-202, Method 213B, Test Condition A
  • High Frequency Vibration: MIL-STD-202, Method 204D, Test Condition D
  • Resistance to Solvents: MIL-STD-202, Method 215A Ordering
  • Specify packaging, product and option code (i.e., TR2/TCP500-R) Soldering Method
  • Wave Immersion: 260°C, 10 sec max.
  • Infrared: 260°C, 30 sec max. 5.2 3.7 (0.204) (0.145) 4.0 (0.157) 12.6 (0.496) Land Pattern Dimensions mm⁄(inches)

% of Amp Rating Opening Time 100% 4 Hours Minimum 250% 1 Second Minimum 250% 4-10 Seconds Typical 250%* 120 Seconds Maximum 300% 10 Seconds Maximum ELECTRICAL AND POWER CROSS SPECIFICATIONS Product Voltage Interrupting DC Cold Typical Maximum Typical Alpha Code Code Rating Rating* Resistance** (ohms) Melting Total Voltage Marking AC 250VAC 600VAC min. typ. max. I 2t† Clearing Drop‡ 1st Code 2nd Code TCP500mA 250 V 50 A 40 A 0.420 0.530 0.640 1.3 A 2s 100 A2s 471mV F TCP2A 250 V 50 A 60 A 0.050 0.075 0.100 30 A 2s 100 A 2s 205mV N * AC Interrupting Rating (Measured at designated voltage, 100% power factor) DC Cold Resistance (Measured at 10% of rated current) * On RoHS Compliant Version (-R option) † Typical Melting I2t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds) ‡ Typical Voltage Drop (Measured at rated current after temperature stabilizes) R*** LIGHTNING SURGE SPECIFICATIONS Surge Specification Surge Repetitions Waveform Current (A) Voltage (V) Performance (µSec.) Requirement TCP 500mA tested FCC 47 Part 68 Longitudinal Type B 2 5x320 37.5 N/A Fuse cannot open FCC 47 Part 68 Metallic Type A 2 10x560 100 800 Fuse must open safely Surge out 25 10x160 65 N/A Fuse cannot open TCP2A tested FCC 47 Part 68 Longitudinal Type A 2 10x160 100 per fuse 1500 Fuse cannot open FCC 47 Part 68 Metallic Type B 2 10x560 100 800 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 10x1000 100 1000 Fuse cannot open Bellcore GR-1089-CORE First Level Lightning 50 2x10 500 2500 Fuse cannot open Surge out 1 10x160 160 N/A Fuse cannot open Surge out 1 10x560 115 N/A Fuse cannot open RoHS 2002/95/EC

Packaging Code Description TR2 2,500 pieces of fuses on 24mm tape-and-reel on 13 inch (330mm) reel per EIA Standard 481, 8mm pitch OPTION CODE Option Code Description -R RoHS Compliant Version (Sn plating w/ Ni barrier) TIME CURRENT CURVE TCP™ Series TCP500MA & TCP2A, Telecom Circuit Protector Visit us on the web at: www.cooperbussmann.com Datasheet: OC-2609 1/07 © Cooper Electronic Technologies 2007 Cooper Electronic Technologies

1225 Broken Sound Parkway NW

Boca Raton, FL 33487-3533 Tel: 1-561-998-4100 Fax: 1-561-241-6640 Toll Free: 1-888-414-2645 Cooper Bussmann P .O. Box 14460 St. Louis, MO 63178-4460 Tel: 1-636-394-2877 Fax: 1-800-544-2570 Cooper Electronic Technologies Cooper (UK) Limited Burton-on-the-Wolds Leicestershire • LE12 5TH UK Tel: +44 (0) 1509 882 737 Fax: +44 (0) 1509 882 786 Cooper Electronic Technologies Avda. Santa Eulalia, 290 08223 Terrassa, (Barcelona), Spain Tel: +34 937 362 812 +34 937 362 813 Fax: +34 937 362 719 Asia Pacific Cooper Electronic Technologies

1 Jalan Kilang Timor

#06-01 Pacific Tech Centre Singapore 159303 Tel: +65 278 6151 Fax: +65 270 4160 North America Europe