TCP-400-4310MC-LP FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Features
- Operating Frequency of 6 GHz Max.
- Good VSWR of 1.3:1
- PIM levels better than -160 dBc
- Silver Plated Brass Contact
- 200 µin minimum contact plating
Applications
- General Purpose Test
- Wireless Communications
- Custom Cable Assemblies
- Low PIM Applications
Description
4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR- 400-UF and LMR-LW400 Cable, part number TCP-400-4310MC-LP, from Fairview Microwave is in-stock and ships same day. This 4.3-10 male connector operates up to a maximum frequency of 6 GHz and offers good VSWR of 1.3:1. The 4.3-10 male connector also has low passive intermodulation (PIM) of -160 dBc. Fairview's 4.3-10 male connector TCP-400-4310MC-LP datasheet specifications and outline drawing are shown in this PDF below. Our extensive offering of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. From providing an I/O for a board design to creating a custom cable assembly configuration, Fairview Microwave has a connector solution to meet your needs. Fairview Microwave also has the expertise to build your custom cable assemblies for you and ship them same-day. Electrical Specifications Description Minimum Typical Maximum Units Frequency Range DC 6 GHz VSWR 1.3:1 Insertion Loss 0.245 dB Passive Intermodulation -160 dBc Impedance 50 Ohms Mechanical Specifications Size Length 1.632 in [41.45 mm] Width 0.866 in [22 mm] Height 0.866 in [22 mm] Weight 0.12 lbs [54.43 g] Mating Cycles 500 Cycles Mating Torque 44.25 in-lbs [[5.00 Nm]]
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR- 400, LMR-400-DB, LMR-400-FR, LMR-400-UF TCP-400-4310MC-LP Material Specifications Description Material Plating Contact Brass Silver 200 µin minimum Insulation PTFE Body Brass Tri-Metal 80 µin minimum Retaining Ring Brass Silver 200 µin minimum Gasket Silicone Environmental Specifications Temperature Operating Range -40 to +125 deg C Shock MIL-STD-202G, Meth.213, Con.I Vibration MIL-STD-202G, Meth.204, Cond.B Thermal Shock MIL-STD-202G, Meth.107, Cond.B Compliance Certifications (see product page for current document) Plotted and Other Data Notes:
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR- 400, LMR-400-DB, LMR-400-FR, LMR-400-UF TCP-400-4310MC-LP Assembly Instruction 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR- 400-UF from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM-400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF TCP-400-4310MC-LP URL: https://www.fairviewmicrowave.com/4.3-10-male-tcom-400-tcom-400-fr-lmr-400-lmr-400-db-lmr-400-fr-lmr-400- uf-lmr-lw400-connector-tcp-400-4310mc-lp-p.aspx The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.
+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS ALL DIMENSIONS ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. UN-DIMENSIONED/NON-CRITICAL FEATURES MAY VARY IN SIZE AND LOCATION COLORS MAY VARY TOLERANCES: .XX = ±.02 [0.5] .X = ±.2 [5] ± 1/32 FRACTIONS ANGLES ± 1° CABLE LENGTH TOLERANCES: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. Website: www.Pasternack.com 53919 1.632 41.45 2.370 60.2 18mm ACROSS FLATS 4.3-10 MALE CONNECTOR .413 10.50 22mm HEX .18 4.5 .39 STRIPPING DIMENSIONS NOTES: FORCE ≥10LB. REVISION ZONE REV DESCRIPTION DATE CHANGED BY APPROVED
1 INITIAL RELEASE 04/29/2024 DZINN AGANWANI
ITEM NO. REVCAGE CODE SIZE A DRAWN BY TCP-400-4310MC-LP 1 TCOM CONNECTOR FOR TCOM-400, 4.3-10 MALE (PLUG), FIELD INSTALL, CRIMP PIN DZINN SHEETSCALE INTERPRET ALL DIMENSIONS AND TOLERANCES PER ASME Y14.5 NONE 1 OF 1 A A B B C C D D E E F F PE DS Rev-D4 Asize TCP-400-4310MC-LP CAD Drawing 4.3-10 Male Low PIM Connector Clamp/Solder Attachment for TCOM-400, TCOM- 400-FR, LMR-400, LMR-400-DB, LMR-400-FR, LMR-400-UF